Some H2B Build Pix

[j0nbunklah0m]

so for an h2b swap wat more is involved than a regular B swap? kuz im interested in doing my own

[sncracing1]

so for an h2b swap wat more is involved than a regular B swap? kuz im interested in doing my own

there really aint a whole lot more too it...just buy the Evolution mount and adapter kit (Personally its alot better made than the Qsd kit) then after that all you have to do is bolt it together...the only things that have to be changed are-you have to notch the back of the block to clear the driver side cv axle(evo sends you a templet to use so its not bad)....and you have to machine down the crank pulley to clear the frame rail...if you run a jdm h22 and you run a usdm dissy cap you wil have to run a external coil wire...and the only other thing i can think of is injectors...if you run the h22 injectors you have to run the resistor box otherwise just get a set of saturated RCs and go from there its not bad! Go for it you wont regret it if ya need any help just holla! JUST FINISHED ANOTHER H2B KIT YESTERDAYS PIX TO COME!!!!!

[j0nbunklah0m]

there really aint a whole lot more too it...just buy the Evolution mount and adapter kit (Personally its alot better made than the Qsd kit) then after that all you have to do is bolt it together...the only things that have to be changed are-you have to notch the back of the block to clear the driver side cv axle(evo sends you a templet to use so its not bad)....and you have to machine down the crank pulley to clear the frame rail...if you run a jdm h22 and you run a usdm dissy cap you wil have to run a external coil wire...and the only other thing i can think of is injectors...if you run the h22 injectors you have to run the resistor box otherwise just get a set of saturated RCs and go from there its not bad! Go for it you wont regret it if ya need any help just holla! JUST FINISHED ANOTHER H2B KIT YESTERDAYS PIX TO COME!!!!!

kool kool thanks for the info. reps to u