Results 1 to 13 of 13

Thread: 1994 civic hatch project

  1. #1
    DurtyDubs pebojelly's Avatar
    Join Date
    May 2008
    Location
    Villa Rica
    Age
    45
    Posts
    463
    Rep Power
    18

    Default 1994 civic hatch project

    I got this car monday this week.
    Car was slammed in the fron like no spring and rode like crap.
    Engine bay was super dirty.
    Has 3-4 dents in the top of the car and someone attempted to fix them,the paint is the worst.
    There is some rust in the rear quarters.
    Missing the driver side lip.

    his pic before I got it,cant fully tell but that fron is bottomed out.






    After I raised it up and installed the missing driver side lip




    I am removing the body filler to fix the dents the right way now,going to cut and weld in new quarter Saturday and might go and spray the thing before the end of the month back factory white.

  2. #2
    PURP-a-trader PURP's Avatar
    Join Date
    Feb 2008
    Posts
    13,880
    Rep Power
    45

    Default

    UMMMMMM... white eg's... I love white... hope to see it finished and G/L
    Quote Originally Posted by PURP View Post
    A g00n... is a real life thing. It walks, talks, and shits. A goblin is a fictional character that isn't real life. It's FAKE..... like rotas, y0. Hope that helps.

  3. #3
    slob on my NOOB cactusEG's Avatar
    Join Date
    Jul 2005
    Location
    San antonio 210
    Posts
    20,538
    Rep Power
    41

    Default

    Where did u buy this car ? I think i might know who use to own it...

  4. #4
    Torque is love.
    Join Date
    May 2008
    Location
    Charleston, SC
    Age
    41
    Posts
    202
    Rep Power
    18

    Default

    EG's are my favorite Civic. If you're looking for a really bright, pure white, check out Ford's Oxford White.

    What are you going to use the car for? Weekends, DD, show? What are your plans for the motor?

  5. #5
    Black & Gold Captain-Obvious™'s Avatar
    Join Date
    Mar 2006
    Location
    Duluth, GA
    Age
    37
    Posts
    5,939
    Rep Power
    31

    Default

    pretty good platform to start with. Just make sure you follow through with that plan

  6. #6
    Respect is EARNED Motivation's Avatar
    Join Date
    Feb 2008
    Location
    North Augusta, SC
    Age
    38
    Posts
    8,786
    Rep Power
    32

    Default

    Nice project. You just going to use it for a DD or ya got bigger plans for it?
    Back to being stock and slow

  7. #7
    IA Senior Hustler eYezs1ck's Avatar
    Join Date
    Feb 2007
    Location
    한 국
    Posts
    4,312
    Rep Power
    26

    Default

    u sneaky guy u bought this from craiglist didnt you

  8. #8
    C.r.E.a.M MistaCee's Avatar
    Join Date
    Dec 2006
    Location
    Work
    Age
    36
    Posts
    8,141
    Rep Power
    29

    Default

    I saw this on Cl. goodluck with it man.

  9. #9
    DurtyDubs pebojelly's Avatar
    Join Date
    May 2008
    Location
    Villa Rica
    Age
    45
    Posts
    463
    Rep Power
    18

    Default

    1994 CX hatch no A/C no PS or PW or anything.
    D16Z6 sohc vtec motor swap done about a year ago by previous owner.
    vtec not working and cel on.
    Nice rust in the rear quarters.
    dents on the top near then antenna.
    missing the antenna,driver side lip,front end slammed with eBay junk and way to low.
    engine bay dirtier then a junk yard car,crappy paint on the valve cover.

    Pics of the car as I got it.


    After I got it raised it up and picked up and intalled the dr lip.





    rust in the quarters.


    http://i89.photobucket.com/albums/k2...k/DSCF0052.jpg

    After I gringed some rust away to see how bad it was.Painted with a rattle can to keep it in check until I found replacment panels.

    http://i89.photobucket.com/albums/k2...k/DSCF0052.jpg


    Struts and coilsovers used to correct the ride.
    Guy I got the car from had 2 sets of ground controls,I sold one set and kept the other.






    Removal of the front end and begin sanding.





    Panels for the rear to be welded in tomorrow and car will be in gray primer wating to get a nice white base clear painted by me.









  10. #10
    DurtyDubs pebojelly's Avatar
    Join Date
    May 2008
    Location
    Villa Rica
    Age
    45
    Posts
    463
    Rep Power
    18

    Default

    Yes it was found on CL local.
    I will be DD this with the D16z6 for a little while.
    Next step is either D16 turbo no not eBay junk or B16 swap.









  11. #11
    DurtyDubs pebojelly's Avatar
    Join Date
    May 2008
    Location
    Villa Rica
    Age
    45
    Posts
    463
    Rep Power
    18

    Default

    I have one thing I need help with.
    Which lip? and painted or not? Are these headlights and fogs very accurate JDM copies?



    #1

    #2


    No before pictures of the engine bay but here are the new ones.




    Valve cover ordered and new timing belt,crank seal,cam seal water pump on the way through eBay but genuine Honda parts.

    Very dry motor no oil leaks and no grinds in the trans.
    I am going to change the manual trans fluid next week.









  12. #12
    DurtyDubs pebojelly's Avatar
    Join Date
    May 2008
    Location
    Villa Rica
    Age
    45
    Posts
    463
    Rep Power
    18

    Default

    car will be in black or gray primer this weekend just waiting to meet up with my buddy tomorrow to see what he has a quart of.

    I am going to let the resigns get out from the body filler and primer before I wet sand and base clear it white again.









  13. #13
    DurtyDubs pebojelly's Avatar
    Join Date
    May 2008
    Location
    Villa Rica
    Age
    45
    Posts
    463
    Rep Power
    18

    Default

    I need someones opinion on the lips and info about these headlights and fogs.









Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!