Page 1 of 3 123 LastLast
Results 1 to 40 of 120

Thread: Slow moving progress....my DB1 integra...(56k may have EPIC FAIL)

  1. 04-24-2008, 08:46 AM #1
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Smile Slow moving progress....my DB1 integra...(56k may have EPIC FAIL)

    Well, i figure, i finally have enough pics to actually show SOME progress on my DB1 that i got on here maybe a couple of weeks ago..

    1st Needs:

    -refresh the motor so that itll pass emissions...
    -repaint it.
    -I also had to change out the left front upper and lower control arms, outboard cv axle, brake rotor and steering knuckle... Thats the only thing i dont have pics of right now and WISH i had gotten some photos of the install, cuz thats the biggest thing ive done to the car so far. Took me 3 hours to do it.


    4/11/2008





    brand new Plug wires, Oxygen sensor, and spark plugs FTW




    4/12 - 4/14/2008

    This is the car in my garage on jackstands after my little mishap with the left front axle deciding to snap off while i was driving because of the one bolt that holds the whole assembly on decides to be stripped out and wont hold the nut on......but 1st, it looks like a good time to start painting! After i finish, the car will be matte black.

    LOL-- autozone can be your best friend.



    Also, i'd just started some sanding and masking so i could prime the hood..


    left front quarter panel...




    Here's a little more detail of the broken left front assembly...


    The bolt circled in red is the one that was completely stripped out. The lower control arm is circled in green...

    and the CV laying on the ground...


    Started taking it all apart...



    Here's the nasty culprit right here!




    As far as the actual installation? I mentioned earlier... i sadly did not get any pics of THAT , but i did it the very next day. Went to the junkyard and pulled the lower ctrl arm, upper ctrl arm, cv axle, and steering knuckle in 2 hours. Got it home, and installed it in 3 hours.

    And, after the 14th, i had to go out of town for 1 week so no progress there either. Up til today, the only things ive done is continued painting the car, section by section, and i cleaned up my interior a little. Tucked the radiator switch and installed a triple gauge pod in the area where the radio is supposed to be.
    Reply With Quote Reply With Quote
  2. 04-24-2008, 08:51 AM #2
    Captain-Obvious™
    Captain-Obvious™ is offline
    Black & Gold Captain-Obvious™'s Avatar
    Join Date
    Mar 2006
    Location
    Duluth, GA
    Age
    37
    Posts
    5,939
    Rep Power
    31

    Default

    good project car
    Reply With Quote Reply With Quote
  3. 04-24-2008, 08:55 AM #3
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    4/21 - 23/2008

    lol, some JDM-ness...

    It says "Radiator Fan" in japanese... right? lol, i didnt check in a dictionary...


    Getting prepared for boosting one of these days...
    Reply With Quote Reply With Quote
  4. 04-24-2008, 09:05 AM #4
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default CURRENTLY

    And as of right NOW, this is how the car sits....:boobies:

    Reply With Quote Reply With Quote
  5. 04-24-2008, 09:21 AM #5
    JEY$JDM
    JEY$JDM is offline
    JDMSK8R JEY$JDM's Avatar
    Join Date
    Aug 2007
    Location
    NY 2 GA
    Age
    36
    Posts
    4,339
    Rep Power
    26

    Default

    yeah man! ..gettin there. lol. gl and keep it up man.=)
    Reply With Quote Reply With Quote
  6. 04-24-2008, 11:39 AM #6
    SiLkY_JohnSon
    SiLkY_JohnSon is offline
    Certified Gearhead SiLkY_JohnSon's Avatar
    Join Date
    Jan 2008
    Location
    Nashville
    Posts
    969
    Rep Power
    18

    Default

    G/l wit ya project mayne
    Reply With Quote Reply With Quote
  7. 04-24-2008, 11:40 AM #7
    Sammich
    Sammich is offline
    IA's MIA'r Sammich's Avatar
    Join Date
    Dec 2005
    Location
    Killin all imposter Sammiches
    Posts
    59,408
    Rep Power
    140

    Default

    i know where this sexy db1 is for sale...absolutely flawless...



    Quote Originally Posted by Sinfix_15 View Post
    You travel with so much luggage that it wont fit in a wagon? you dating a kardashian?
    Reply With Quote Reply With Quote
  8. 04-24-2008, 11:51 AM #8
    cactusEG
    cactusEG is offline
    slob on my NOOB cactusEG's Avatar
    Join Date
    Jul 2005
    Location
    San antonio 210
    Posts
    20,538
    Rep Power
    41

    Default

    This isnt like the EF build last time ?

    EL_REY_DEL_4_PLAY
    Reply With Quote Reply With Quote
  9. 04-24-2008, 01:34 PM #9
    Brown Man
    Brown Man is offline
    Say Somethin'
    Join Date
    Apr 2007
    Location
    in that one girl...
    Age
    37
    Posts
    2,517
    Rep Power
    22

    Default

    on working on your own car
    weak civic
    Reply With Quote Reply With Quote
  10. 04-24-2008, 01:58 PM #10
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    Quote Originally Posted by cactusEG
    This isnt like the EF build last time ?
    lol nope cuz this time i actually have the car.
    Reply With Quote Reply With Quote
  11. 04-24-2008, 05:04 PM #11
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    4/24/2008 (TOMORROW...) Gonna try to head up to this shop in Canton that was recommended to me on PM's by someone who works there so i can get my emissions straightened out..so i can finally get a license TAG.

    EDIT-- ^^^meant to say 4/25/08, lol, SATURDAY , not friday.
    Last edited by GM_TUNER; 04-25-2008 at 02:21 PM.
    Reply With Quote Reply With Quote
  12. 04-24-2008, 05:12 PM #12
    DB4LYFE ™
    DB4LYFE ™ is offline
    IA FIT Member DB4LYFE ™'s Avatar
    Join Date
    Aug 2007
    Location
    NW Boonies
    Posts
    5,937
    Rep Power
    34

    Thumbs up

    wow another DB1 good choice! just some luv and ull be good! uve got a problem like me, need an emissions thats good. lol couldnt figure it out! ne ways good job so far! REPS FOR A FELLOW DB1

    ~DB4LYFE
    07 Honda GD3

    Reply With Quote Reply With Quote
  13. 04-24-2008, 05:21 PM #13
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    Quote Originally Posted by DB4LYFE
    wow another DB1 good choice! just some luv and ull be good! uve got a problem like me, need an emissions thats good. lol couldnt figure it out! ne ways good job so far! REPS FOR A FELLOW DB1

    ~DB4LYFE
    yeahhh dood and the thing failed cuz of my NOx ppm bein too high. the worker also overheated my car while i was there
    Reply With Quote Reply With Quote
  14. 04-24-2008, 05:27 PM #14
    jew_boy
    jew_boy is offline
    <-- haha it a panda jew_boy's Avatar
    Join Date
    Dec 2007
    Location
    Warner Robins
    Age
    36
    Posts
    3,894
    Rep Power
    21

    Default

    not bad man

    92 Lx 466, 11.8 @ 111 (Daily Driver )
    98 sunfire GT (terrible gas mileage)
    Reply With Quote Reply With Quote
  15. 04-24-2008, 09:04 PM #15
    bb4pimp
    bb4pimp is offline
    94 acord parting out bb4pimp's Avatar
    Join Date
    Sep 2007
    Location
    douglasville
    Age
    40
    Posts
    864
    Rep Power
    19

    Default

    g/l with the teggy, cant wait to see this finished



    Contact TRS at [email protected] or call us at 480-745-3990
    Reply With Quote Reply With Quote
  16. 04-24-2008, 09:26 PM #16
    DB4LYFE ™
    DB4LYFE ™ is offline
    IA FIT Member DB4LYFE ™'s Avatar
    Join Date
    Aug 2007
    Location
    NW Boonies
    Posts
    5,937
    Rep Power
    34

    Post

    Quote Originally Posted by GM_TUNER
    yeahhh dood and the thing failed cuz of my NOx ppm bein too high. the worker also overheated my car while i was there
    Mine was Nox as well! i dunno if u figure it out let me know! haha

    ~DB4LYFE
    07 Honda GD3

    Reply With Quote Reply With Quote
  17. 04-24-2008, 09:46 PM #17
    bb4pimp
    bb4pimp is offline
    94 acord parting out bb4pimp's Avatar
    Join Date
    Sep 2007
    Location
    douglasville
    Age
    40
    Posts
    864
    Rep Power
    19

    Default

    g/l with the teggy, cant wait to see this finished



    Contact TRS at [email protected] or call us at 480-745-3990
    Reply With Quote Reply With Quote
  18. 04-24-2008, 09:47 PM #18
    cactusEG
    cactusEG is offline
    slob on my NOOB cactusEG's Avatar
    Join Date
    Jul 2005
    Location
    San antonio 210
    Posts
    20,538
    Rep Power
    41

    Default

    Quote Originally Posted by GM_TUNER
    lol nope cuz this time i actually have the car.
    lol ur on ur way

    EL_REY_DEL_4_PLAY
    Reply With Quote Reply With Quote
  19. 04-24-2008, 09:55 PM #19
    FasTech
    FasTech is offline
    I♥mydick ٩(-̮̮̃•̃)۶ FasTech's Avatar
    Join Date
    Mar 2008
    Location
    Middle, Ga
    Age
    36
    Posts
    12,577
    Rep Power
    36

    Default

    looking good bro. G/L on the car
    "Damn, Its Tyler"
    RaceReadyDevelopments
    Reply With Quote Reply With Quote
  20. 04-25-2008, 02:18 PM #20
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    Quote Originally Posted by DB4LYFE
    Mine was Nox as well! i dunno if u figure it out let me know! haha

    ~DB4LYFE
    everybody keeps telling me immediately that its sign of a bad cat. i asked lyk 7 or 8 people too.:boobies:
    Reply With Quote Reply With Quote
  21. 04-25-2008, 09:56 PM #21
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    lol.....EDIT again.... Im not gonna go to canton, ga tomorrow to get a cat and the car emissions ready, i decided to stay local with the emissions stuff. Instead, i might try to find the FORGED performance shop in marietta so i can maybe get a dyno run to see what kind of power im making before i do any engine work.

    lol, i heard that supposedly they're doing an ''open house''/dyno day thing tomorrow, so ill check that out.
    Reply With Quote Reply With Quote
  22. 04-26-2008, 02:42 PM #22
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default W00t time to update the build thread!!

    lol....here we go, 4/26/2008.

    Went up to FORGED performance for their dyno day, and got my DB1 baselined.
    My B18a1 base-lined at ~96whp lol fuel economy FTW...
    also keep in mind, i havent even touched the car, engine/power wise.

    Heres some pictaaas::boobies:


    Here we are in the driveway this morning at 10:30, getting ready to head out to FORGED...



    LOL and here's getting ready to get a lil bit lost... still found it easily though.


    w0ot made it, the lot was PACKED too.




    Had a bit of trouble pulling onto the dyno, because on the way over, one of my exhaust hangers decides to fall off so my exhaust hung too low and got caught on the edge of the dyno. lol, idk how they managed to fix it though with just a wood block


    Ah, finally on it.


    Anyways, yeah, i dont have the dyno sheet with me its being laminated. Ill post it up here soon as i get it back from Kinko's.
    Reply With Quote Reply With Quote
  23. 04-26-2008, 02:52 PM #23
    Revmaynard
    Revmaynard is offline
    EE OG Revmaynard's Avatar
    Join Date
    Mar 2006
    Age
    36
    Posts
    11,401
    Rep Power
    39

    Default

    Don't you think if your cat is bad you're losing power? I would have passed emissions before I spent $40+ on a dyno. Either way, can't wait to see more updates, I think a DB or an Accord would be next for me.

    Bozzio for president.
    Reply With Quote Reply With Quote
  24. 04-26-2008, 02:55 PM #24
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    Quote Originally Posted by Revmaynard
    Don't you think if your cat is bad you're losing power? I would have passed emissions before I spent $40+ on a dyno. Either way, can't wait to see more updates, I think a DB or an Accord would be next for me.
    Honestly, im not sure how it would effect it. Plus, i should be getting the cat done some time today, cuz im almost running out of the 30 days that i can drive without a tag.

    Plus i said that i wanted to get it dynoed and see what kind of power its making before i touch ANYTHING
    Last edited by GM_TUNER; 04-26-2008 at 03:02 PM.
    Reply With Quote Reply With Quote
  25. 04-26-2008, 04:52 PM #25
    Revmaynard
    Revmaynard is offline
    EE OG Revmaynard's Avatar
    Join Date
    Mar 2006
    Age
    36
    Posts
    11,401
    Rep Power
    39

    Default

    Quote Originally Posted by GM_TUNER
    Honestly, im not sure how it would effect it. Plus, i should be getting the cat done some time today, cuz im almost running out of the 30 days that i can drive without a tag.

    Plus i said that i wanted to get it dynoed and see what kind of power its making before i touch ANYTHING
    I saw you said that, I just thought pretty much tuning the car up was something most people do when they get something new. I thought the anything meant any mods. But good luck.

    Bozzio for president.
    Reply With Quote Reply With Quote
  26. 04-26-2008, 10:12 PM #26
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    Quote Originally Posted by Revmaynard
    I saw you said that, I just thought pretty much tuning the car up was something most people do when they get something new. I thought the anything meant any mods. But good luck.
    lol, i did do a tuneup though.. I did the plug wires and plugs oil and o2 sensor. Just not the cat.
    Reply With Quote Reply With Quote
  27. 04-27-2008, 02:00 PM #27
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Exclamation Update, forgot something yesterday!

    Here is the video of 2 of my dyno runs when i was at FORGED yesterday.

    lol, during the video try to notice all the white smoke coming from my exhaust when the guy takes my car up the rpm range... ...still gotta do that head gasket replacement lol. Sorry i couldnt get the actual vid on HERE, but i tried to make it as easy as possible so just click the link below please.

    http://www.youtube.com/v/iPD4AVBuSR8 - Dyno vid, last 2 runs....
    Reply With Quote Reply With Quote
  28. 04-28-2008, 07:41 PM #28
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    another UPDATE:

    picked up the head gasket yesterday, i will be attempting to do it this weekend...5/3 - 4/2008, there will be many pics to come...just hold tight
    Reply With Quote Reply With Quote
  29. 05-05-2008, 09:06 PM #29
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Exclamation AH!! FINALLY AN UPDATE!!

    woo, it feels good to finally have another UPDATE...

    Anyways. The last weekend, as promised, i made an attempt at the head gasket replacement. Seeing as how im kinda not all that great of a mechanic and im still learning, i kinda failed at it.. ..Fortunately, i didnt mess up my timing or anything else though.

    I do have a couple of pics of that, if anyone would like to see them ill just post links to them. Furthest i got was removing the valve cover and dizzy, then i got frustrated and gave up (hehe there was much more to it than that though.... ). Links will be at the bottom of this post.

    But heres what was done today; 5/5/2008 ~ happy cinco de mayo yall!!


    W0ot brand new catalytic converter, even tho its for a 95+ teggy, it still fits


    Took the heat sink off the old cat....



    YUK, nasty cat. If you are gonna take the cat outta your car, or do something similar to this, you're gonna need a breaker bar/impact wrench, and 13mm and 14mm sockets to get the nuts off the front and rear flanges.:boobies:




    Impact driver, PB Blaster, and WD-40 = your FRIENDS for all those galled out/rusted out nuts and bolts under there....


    Since i couldnt really get enough access to turn the nuts that hold the cat on from underneath the car, i just decided to remove the whole thing and then put it all back

    heres the BEFORE:


    and the AFTER:



    old vs new section...



    catalytic inlets



    Catalytic Outlets




    And here it is, finally installed!! w00t Now im gonna be able to pass emissions!!




    EDIT:
    -i'd really like to get dyno-ed again too after having installing the cat. I Felt a power gain immediately. I plan on doing a resonator delete and port/polish of my intake manifold before i get dyno-ed again as well....One of my homeboys also said he has some dual spring valve springs for me as well (??) that ill probably be trying to get in a day or two. So yeah. If anyone knows when someplace is having another dyno day, lemmeknow!
    Last edited by GM_TUNER; 05-05-2008 at 09:28 PM.
    Reply With Quote Reply With Quote
  30. 05-05-2008, 09:15 PM #30
    jew_boy
    jew_boy is offline
    <-- haha it a panda jew_boy's Avatar
    Join Date
    Dec 2007
    Location
    Warner Robins
    Age
    36
    Posts
    3,894
    Rep Power
    21

    Default

    it coming along

    92 Lx 466, 11.8 @ 111 (Daily Driver )
    98 sunfire GT (terrible gas mileage)
    Reply With Quote Reply With Quote
  31. 05-05-2008, 09:17 PM #31
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Red face uhhh...see whut had happend wuz.....

    Heres the links for the pics of my "attempt" to replace my headgasket... ...Narrations will still be included lol...Only reason for not posting the actual pics of this is because it would be a waste of time....so yeah...links only.


    lets just start with the basics; my engine bay....
    http://img265.imageshack.us/img265/715/1000130hn7.jpg


    got my spark plugs out...they look good-- my engines doin goood inside
    http://img205.imageshack.us/img205/9733/1000131sb7.jpg


    Had to disable the fuel system. Heres prettymuch how you do it, just undo one plug to the fuel pump and take the gas cap off and let all the psi's rush out....
    http://img265.imageshack.us/img265/4567/1000133tt5.jpg


    lol...a bit of a coolant spill ...that stuff was SPRAYING all over for a minute there....
    http://img205.imageshack.us/img205/5315/1000142vv1.jpg


    mm, thats all.:boobies:
    Reply With Quote Reply With Quote
  32. 05-05-2008, 11:39 PM #32
    bb4pimp
    bb4pimp is offline
    94 acord parting out bb4pimp's Avatar
    Join Date
    Sep 2007
    Location
    douglasville
    Age
    40
    Posts
    864
    Rep Power
    19

    Default

    hey can i buy the old cat from you?



    Contact TRS at [email protected] or call us at 480-745-3990
    Reply With Quote Reply With Quote
  33. 05-06-2008, 03:22 PM #33
    bb4pimp
    bb4pimp is offline
    94 acord parting out bb4pimp's Avatar
    Join Date
    Sep 2007
    Location
    douglasville
    Age
    40
    Posts
    864
    Rep Power
    19

    Default

    hey can i buy the old cat from you?



    Contact TRS at [email protected] or call us at 480-745-3990
    Reply With Quote Reply With Quote
  34. 05-06-2008, 03:31 PM #34
    MR.EM1
    MR.EM1 is offline
    FLOSSIN' MR.EM1's Avatar
    Join Date
    Mar 2008
    Age
    37
    Posts
    1,377
    Rep Power
    20

    Default

    keep it up man
    FL
    Reply With Quote Reply With Quote
  35. 05-06-2008, 03:37 PM #35
    Sammich
    Sammich is offline
    IA's MIA'r Sammich's Avatar
    Join Date
    Dec 2005
    Location
    Killin all imposter Sammiches
    Posts
    59,408
    Rep Power
    140

    Default

    loving seeing this DB1 make good progress



    Quote Originally Posted by Sinfix_15 View Post
    You travel with so much luggage that it wont fit in a wagon? you dating a kardashian?
    Reply With Quote Reply With Quote
  36. 05-06-2008, 04:35 PM #36
    SandM
    SandM is offline
    always dirty.... SandM's Avatar
    Join Date
    Mar 2005
    Location
    L'ville
    Age
    39
    Posts
    2,852
    Rep Power
    24

    Default

    looking good man. keep it up. hooray, no more sunfire.


    Reply With Quote Reply With Quote
  37. 05-06-2008, 07:11 PM #37
    Just_CHill
    Just_CHill is offline
    Next adventure is... Just_CHill's Avatar
    Join Date
    Aug 2007
    Location
    Cobb County
    Age
    39
    Posts
    5,656
    Rep Power
    27

    Default

    Good times man. G/L with the build.
    BUY THESE PARTS!!!
    Reply With Quote Reply With Quote
  38. 05-06-2008, 08:20 PM #38
    FasTech
    FasTech is offline
    I♥mydick ٩(-̮̮̃•̃)۶ FasTech's Avatar
    Join Date
    Mar 2008
    Location
    Middle, Ga
    Age
    36
    Posts
    12,577
    Rep Power
    36

    Default

    She's coming along, goodjob bro............
    "Damn, Its Tyler"
    RaceReadyDevelopments
    Reply With Quote Reply With Quote
  39. 05-06-2008, 09:39 PM #39
    merfwin
    merfwin is offline
    Sport Injected merfwin's Avatar
    Join Date
    Dec 2005
    Location
    ATL, GA
    Age
    40
    Posts
    1,076
    Rep Power
    21

    Default

    i still whooped u yesterday ! lol jk ! keep up the good work
    Reply With Quote Reply With Quote
  40. 05-07-2008, 07:37 PM #40
    teh_mugen18
    teh_mugen18 is offline
    mm...Needs some Salt teh_mugen18's Avatar
    Join Date
    Dec 2005
    Location
    SwiperNoSwiping!!
    Age
    34
    Posts
    2,343
    Rep Power
    25

    Default

    5/7/08....

    Wo00t finally got that emissions test. I finally PASSED! Now i can finally go ahead and get my tag...ill probably do that tomorrow, if i get everything straight with the paperwork/title...

    Essentially all i need to do is get it re-signed, and notarized, and an affidavit or something like that...

    bureaucrats and paperwork FTL....
    (no offense to anyone... )

    Next up, we've got a ported/polished intake manifold coming. Ill probably install some 310cc injectors from an Acura Legend, if my stock 245cc injectors wont make the car crank after i get the modded manifold on...
    Ill keep y'all posted!
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Type-R got a'lil maintenance today :) cam seal, vtec gasket, thermostat >>>> | Local Meet. »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!