plain and simple, post up pictures of your current project weather it's daily driven or full race!
pics of my EF sedan build and turbo H
pics of your current project!
plain and simple, post up pictures of your current project weather it's daily driven or full race!
pics of my EF sedan build and turbo H
Moved to Car Pics.
wow, i knew that! preciate it
like the h man, really clean.
My pretty POS. KYB AGX Struts and either Eibach springs or the Tein S-Tech's I've got in the garage. Are gonna be next. Probably a lip and that's about it.
Epic Foxbody Thread Crew Member #10Originally Posted by AlanŽ
Taking the engine from this....
and putting it into this...
Then building a big block for the gray car. Not gonna do it until the fall though.
twin turbos 1089rwhp boost only
nice stangs!
And a list of few of many things im putting into the car after i save the $$
IN ORDER (kinda)
HARD DOG SINGLE ROLLBAR
TODA Racing camshafts and valvetrain
TEIN super street dampering kit
TEIN E.D.F.C.
APEXI N1 exhaust system
AAC Flush headlight kit
EXEDY stage 2 clutch and ACT lightweight flywheel
INTERRIOR (just because)
MOMO ATOMIC hand break
shift knob
and pedals
Zombie panda BACK IN BLUE
Nothing too crazy, just a regular sedan I toy with
When it's back on the road it'll have 13" front cobra rotors and g45 calipers, z31 rear brakes (bigger), pathfiner intake swap, sub frame connector, intrax springs, heimed rear links, and a fresher motor.
what car is/was that? and what motor are you dropping in?
heres mines..
and this is what i plan to do to it next ..
my project ef
Lurking
woot woot ^
hhhmmm:....
ATL DAsquad Member #9
another boosted EF huh...looks like i might have my work cut out for me
thx:.. and i think you do...lol.
&& is that H goin into your EF??
ATL DAsquad Member #9
yup!
h22a w/ golden eagle sleeves and LSD tranny
ARP head studs
ported and polished head
JE pistons 9:1
crower pro billet rods ( have tag )
crower 0/5mm oversize intake and exhaust valves
crower titanium springs and retainers
crower lightweight polished crank
crower beast cams ( have tag )
ferrea valve guides
skunk 2 fully adj cam gears
prodrive billet oil pump
garrett GT40R
PWR air to water intercooler
hose techniques clamps
walbro pump w/ inline
1000cc ( peak and hold ) RC PL4 injectors
golden eagle intake manifold
custom turbo manifold built by ME
aem fuel rail
aeromotive fuel pressure regulator
hondata S300
10mm spark plug wires
MSD 6AL ignition
MSD blaster SS coil
cometic head gasket
block was painted gloss black
ground kit
apexi turbo rimer
comp stage 5 clutch
synapse BOV
HKS 44mm wastegate
suspension
Skunk 2 sport springs and sleeve coil overs ( baby going to be in car and dont want a REALLY rough ride, just slightly bumpy! )
skunk 2 camber kits
skunk 2 LCA's and front uca's
the BEAST
1948 Chevy Pickup
Cadillac 472, TH400, Ford 9"
Frame Z'd ~13", cab chopped, sectioned
Edelbrock carb & IM, Lokar shifter w/grenade shift knob
Last edited by BKgenŽ; 04-02-2008 at 10:08 PM.
thats freakin sick!
damn thas one fine list:.. cant wait to see it all together:..
&& i hope the baby has a neck brace, helmet, and a good 4pt harness too
w/ that setup.....
but good stuff man:..
ATL DAsquad Member #9
MY PROJECT DA!!
Besides trying to get my DC integra finished,heres my "project DA" im working on,im taking parts off a salved title car i have and building one good car! THAT I CAN GET A TITLE ON!!..LOL... thats a long story but here's the pics!
1st car the way it sat when i started on it!!
i added some GSR leathers... working on cleaning up the interior.....
heres my 1 piece HL im taking off my salvaged title car
NEW FRESH "LS" MOTOR COMMING SOON!! heres the only "teaser pic" i have of the motor.....
should be finishing motor & swapping suspension this weekend!! hope it comes out good!! but ill keep ya guys informed!!
Besides trying to get my DC integra finished,heres my "project DA" im working on,im taking parts off a salved title car i have and building one good car! THAT I CAN GET A TITLE ON!!..LOL... thats a long story but here's the pics!
1st car the way it sat when i started on it!!
i added some GSR leathers... working on cleaning up the interior.....
heres my 1 piece HL im taking off my salvaged title car
NEW FRESH "LS" MOTOR COMMING SOON!! heres the only "teaser pic" i have of the motor.....
should be finishing motor & swapping suspension this weekend!! hope it comes out good!! but ill keep ya guys informed!!
need some DA front hubs if you have some for sale!?
damn thas one fine list:.. cant wait to see it all together:..
&& i hope the baby has a neck brace, helmet, and a good 4pt harness too
w/ that setup...
but good stuff man:..
baby will be rolling in style, ordered the new RECARO baby seat to match my two fronts, should hold the little squirt pretty good!
where did you order it from... been looking for one for my lil man...baby will be rolling in style, ordered the new RECARO baby seat to match my two fronts, should hold the little squirt pretty good!
no way.. now thas pretty cool man:..baby will be rolling in style, ordered the new RECARO baby seat to match my two fronts, should hold the little squirt pretty good!
ATL DAsquad Member #9
http://www.recarochildseat.com/RECAR...dex.cat?sNav=0
here ya go
nice project DA yo:.. keep it up:..
ATL DAsquad Member #9
come on people keep em coming!
Here is My shop whore.
1987 S4 Turbo 2 rx-7
JDM S5 motor with massive port work
mazdaSpeed pressure Plate w/ stock disk
Pansport ECU
HKS Pop charger
Full custom 3" to 2 1/2 " exhaust being reworked by mainstream
Custom mainstream FMIC Kit
MSD AL2
Halman boost controller (14 PSI)
RS*R down pipe
C's Short throw
( i am sure i missing something)
Just ordered;
Tokiko Shocks
Tein S-tech springs
Tein pillow mounts
Strut bar
ST Sway bars
First got IT
Right before It got the FMIC
Here are the Dyno numbers Prior to FMIC and New exhaust
i should be just shy of 250hp and unsure on Ftlbs once i get it back tomorrow.
Try not. Do or Do not.
1990 maxima, just putting a vg30e back into it.
sweet!
anyone else care to post?
Posting Permissions
Reply With Quote
