CANT wait till tomorow...
Printable View
CANT wait till tomorow...
i might have to go to nopi just to see this car.
i hope you will have something to show everyone there what went into this car
i'll be looking for this @ Nopi.
And if it's not there,then this whole build was pointless
^motivation :D
keep it up man
Yeah, not quite ballin' enough to get a big brake kit. The teg's will have to do for now. Not sure, but most likely Rota's :cheers:Quote:
Originally Posted by Bucky
Yeah, that is motivation right there :cheers:Quote:
Originally Posted by 90_ZC_HATCH
She'll be there, you can bet that :goodjob:
Will and Rex stopped by. Damn he is getting big. Still got those crazy eyes:
http://i121.photobucket.com/albums/o..._5652_rs35.jpg
Got the front end in:
http://i121.photobucket.com/albums/o..._5661_rs35.jpg
http://i121.photobucket.com/albums/o..._5662_rs35.jpg
Session 035:
Front brakes in. Jack still there doing the dirty work:
http://i121.photobucket.com/albums/o..._5663_rs32.jpg
Steering wheel back in so she can find her way to the paint booth :bump:
http://i121.photobucket.com/albums/o..._5664_rs35.jpg
I put the shifterbox together with the Karcepts kit. I wanted to make sure the opening was wide and sand if necessary before she gets painted:
http://i121.photobucket.com/albums/o..._5665_rs35.jpg
OEM bushings need to be removed:
http://i121.photobucket.com/albums/o..._5666_rs35.jpg
Pop the center metal tube out first:
http://i121.photobucket.com/albums/o..._5667_rs35.jpg
Pry the rubber grommet from the shifterbox:
http://i121.photobucket.com/albums/o..._5668_rs35.jpg
JDM shifterbox biatch :boobies:
http://i121.photobucket.com/albums/o..._5671_rs35.jpg
Jack doing the deed:
http://i121.photobucket.com/albums/o..._5672_rs35.jpg
Need to trim some more:
http://i121.photobucket.com/albums/o..._5673_rs35.jpg
http://i121.photobucket.com/albums/o..._5674_rs35.jpg
Will stopped by so I let him get in on the build:
http://i121.photobucket.com/albums/o..._5677_rs35.jpg
Session 036 & 037 (both on the hard drive - about 30 pictures) within the next couple days. Thanks for looking :police:
Everything is looking good! Can't wait to see it in person.
Aight looks good... Loving the tedious work...
SICK
Damn looking good.
looks good
this car is going to be a dream and the defennition of pride and joy
dam looks nice man
this made me go out and a honda to build again... but I got a EJ...
That is so F'ING SWEET
Did you get that jack at HF???
All have to say is wow! I can't wait to see the finished product!
wow...what a write up. I wish i had that much time to work on my car. keep it up man! makes me want to go outside and do something to my car. lolol
Can't wait to get my 240 so i can do the same...more pics, more pics.......
i love you.
wow... simply k20... such an amazing midori green. so much time and effort thats being put into this build. things are coming together, slowly but surely, the beast will come out!!!
still waiting for updates.
YAY, an update :)
Rock on,
cant wait to see the out come.
Dude you are the sh!t...this build is gangster as hell...you should definetly write a how to book haha...good luck on everything and keep us updated!!! +1
Nice nice. Coming along great man.
Keep us updated as much as you can.
Amazing job!! cant wait to see the finished results
Session 036:
Picked up some washers to shim out the rear camber and also shorten the new bolts:
http://i121.photobucket.com/albums/o..._5685_rs32.jpg
http://i121.photobucket.com/albums/o...6/IMG_5686.jpg
1 for camber correction and 3 to shim the bolt head:
http://i121.photobucket.com/albums/o..._5687_rs32.jpg
What is the proper way to press those 2 parts back together? Yeah, new tie rod ends / castle nuts / cotter pins are going on. The knuckle ball joints are fine and will be getting new castle nuts / cotter pins:
http://i121.photobucket.com/albums/o..._5693_rs35.jpg
http://i121.photobucket.com/albums/o..._5694_rs35.jpg
Some OEM parts I scooped the other day:
http://i121.photobucket.com/albums/o..._5678_rs32.jpg
http://i121.photobucket.com/albums/o..._5679_rs32.jpg
http://i121.photobucket.com/albums/o..._5681_rs32.jpg
http://i121.photobucket.com/albums/o..._5682_rs32.jpg
OEM open end nuts:
http://i121.photobucket.com/albums/o..._5683_rs32.jpg
http://i121.photobucket.com/albums/o..._5688_rs32.jpg
http://i121.photobucket.com/albums/o..._5689_rs32.jpg
$50 bull$hit kit I picked up from Home Depot returning tomorrow. Doesn't even have size M10 :2up: :gay: :umno:
http://i121.photobucket.com/albums/o..._5702_rs32.jpg
For drilling the roll bar:
http://i121.photobucket.com/albums/o..._5703_rs32.jpg
Put the HASport mount in place. Threaded the bolts underneath to make it easier centering the mount:
http://i121.photobucket.com/albums/o..._5697_rs25.jpg
Got verification from a K20a member that this looked right:
http://i121.photobucket.com/albums/o..._5698_rs35.jpg
Marked where I needed to drill:
http://i121.photobucket.com/albums/o..._5700_rs35.jpg
The marks:
http://i121.photobucket.com/albums/o..._5701_rs35.jpg
After 3 step ups, 1/2" holes drilled. Double drilled hole on the right was throwing the bit off. Did my best and pretty happy with the outcome:
http://i121.photobucket.com/albums/o..._5705_rs32.jpg
In there :goodjob: :
http://i121.photobucket.com/albums/o..._5704_rs32.jpg[/QUOTE]
Thanks for all the comments. More pics to come......
:police:
this thread continuously blows me away... +1... again.
Hmmm.. very nice... anything gong to be done to the motor?
In 2008 she will get a snail under the hood and a Big a$$ grill (FMIC) up front :screwy:Quote:
Originally Posted by WhiteAccord
More pics to post......
:police:
Nice niice =]
Mm, I can't wait until '08 then. Lol.
any more pics ??
more updates, lol
too many qualities necessary for this project that I lack, mainly time, patience and money :lmfao:
C.W. Matthews??? That would explain it all, wish I could get a small percentage of all the invoices I process for them to get paid......
Quote:
Originally Posted by Hybrid93Hatch
mmmm me like.... Internals?
Honda cotter pins and all, LOL you are nuts man!
Sickest build ever! Reps.
nice build. i wanna see this when its done.
The car isn't even done and it looks amazing. I'm making plans to go to nopi just to see this car. Keep up the good work! :burnout: