My K20a2 EG build up thread - TONS of pics!

Printable View

Show 100 post(s) from this thread on one page

08-30-2007, 10:51 PM
.blank cd

btw +1 for you
08-30-2007, 10:55 PM
osnap

i was finally able to rep ya again... looking great! :goodjob:
08-30-2007, 10:58 PM
.blank cd

now its time for assembled pics
08-30-2007, 11:02 PM
jdogg319

looking sick i think we are all ready for you to reassemble everything and drop that k in
08-31-2007, 03:22 AM
KPowerEP3

oh my buttsecks.
the color really does look great bro. Reps if I can.
08-31-2007, 06:20 AM
jdogg319

id rep you again too bro but i cant haha
08-31-2007, 07:52 AM
Slow Motion

OMG...........I NEED THOSE

http://i121.photobucket.com/albums/o...07_cr_rs35.jpg

So....damn don't have words to describe.
08-31-2007, 12:08 PM
.blank cd

You should definitely let me buff this car!!! :goodjob:
08-31-2007, 05:32 PM
98toyrolla

+1! The best build up thread I have ever read! I like the fact that you have even PS all the pictures! Keep the pictures comin!
08-31-2007, 11:07 PM
Fuster_Cluck

Thanks again for the props guys. Got to give out some reps now :goodjob:

So, you start will a pile of $hit:

http://i121.photobucket.com/albums/o..._5894_rs35.jpg

Get your tools and elbow grease going:

http://i121.photobucket.com/albums/o..._5896_rs35.jpg

Back of the driver side under dash fuse box:
(first time seeing this for me)

http://i121.photobucket.com/albums/o..._5897_rs35.jpg

The plugs to the fuse box:

http://i121.photobucket.com/albums/o..._5899_rs35.jpg

Like I said, it was in need of this cleaning:

http://i121.photobucket.com/albums/o..._5900_rs35.jpg

Now it's ready to see my hatch:

http://i121.photobucket.com/albums/o..._5901_rs35.jpg

Left = clean / Right = filth:

http://i121.photobucket.com/albums/o..._5903_rs35.jpg

Time to start removing the old wore tape and replacing with the new stuff:

http://i121.photobucket.com/albums/o..._5928_rs35.jpg

Removed a lot of the clips that are not needed:

http://i121.photobucket.com/albums/o..._5929_rs35.jpg

What the **** is this Honda:

http://i121.photobucket.com/albums/o..._5930_rs20.jpg

Before:

http://i121.photobucket.com/albums/o..._5931_rs35.jpg

After:

http://i121.photobucket.com/albums/o..._5932_rs35.jpg

I will be relocating the ECU (kpro). OEM:

http://i121.photobucket.com/albums/o..._5934_rs35.jpg

Apart:

http://i121.photobucket.com/albums/o..._5935_rs35.jpg

Looking better:

http://i121.photobucket.com/albums/o..._5938_rs35.jpg

Complete:

http://i121.photobucket.com/albums/o..._5939_rs35.jpg

Yeah, I've been told half the wires are not needed with the K swap. So after Nopi I am going to pull the harness from the car and remove / depin EVERY wire not needed. I hear it's close to 20lbs :yes: :cheers: :bump:

Thanks for looking and got a ton of $hit to post......
08-31-2007, 11:32 PM
mushroom_toy

I love you! I wish I was going to Nopi to see your car, but by the looks of it I'm probably not. :( Good job...and as always we need more pics!!
08-31-2007, 11:35 PM
Fuster_Cluck

Quote:

Originally Posted by mushroom_toy

I love you! I wish I was going to Nopi to see your car, but by the looks of it I'm probably not. :( Good job...and as always we need more pics!!

Well, I'm sure she'll be at many meets to come :goodjob: I hope you have :boobies: saying words like that :yes:

More pics?!?!?! Here you go.....

A/C & Heat delete - Coolant loop:

The hose cost $8.99 from the local Autozone. You can order it online --> HERE

Before the install:

http://i121.photobucket.com/albums/o..._6202_rs35.jpg

Installed on a 2003 K20a2 motor:

http://i121.photobucket.com/albums/o..._6198_rs35.jpg

http://i121.photobucket.com/albums/o..._6200_rs35.jpg

You will need a clamp for the hose connection on the head (right). The connection on the left is VERY tight and should be fine without a clamp. Of course a clamp would never hurt....

I'm off to bed, good night :police:
09-01-2007, 12:19 AM
mushroom_toy

^ I can't wait. I'm excited!.
09-01-2007, 01:49 AM
jdogg319

clean=Hybrid93Hatchs projekt haha i really mean clean clean he even fcking cleaned his main relay!!! thats dedication man...everyone has to give props to this man he is genius and hard working man and this may be the best thread IA has ever seen and is one of the best step by step ones...just my 2 cents...off to bed i go good night!!!
WE WANT MORE...WE WANT MORE...WE WANT MORE haha
09-01-2007, 09:34 AM
CB7tuner

that hose so close to the header would scare me
09-01-2007, 09:49 AM
KPowerEP3

Quote:

Originally Posted by CB7tuner

that hose so close to the header would scare me

there's a lot of weird shit like that on the K. One thing that eternally pisses me off is my upper rad hose sitting ON my intake pipe right before the TB.

Also, Hybrid...
what are you pulling out of the harness? I'm assuming this is more of a 'race only' car, since you're deleting AC and heat. I'm sure all the emissions related stuff, but what else?
09-01-2007, 10:03 AM
Whiteboy™

more pictures, now. lol
09-01-2007, 11:24 AM
speedminded

I can't believe I haven't seen this thread!!!

Quote:

Originally Posted by Hybrid93Hatch

After hearing the 3m undercoating is no that great I am now leaning towards a nice coat of primer and battleship gray for the under carriage / fender wells

Very good decision, as meticulous and detail oriented as you are a really good coat of paint will be better than textured undercoating that just collects and holds grime and road debri. I can see you now polishing and waxing underneath :tongue:

Wish there was a way we could get the undercarriage paint from Europe, it's a paint mixed with Teflon and sprayed on...virtually nothing can stick to it and if it does just a simple rinse with light water pressure takes it off. Due to EPA regulations it's not legal here though :(

I'm sure i'll post up again as I continue with the thread :D
09-01-2007, 01:16 PM
speedminded

Any idea how many pics are in this thread?! I got an idea...
09-01-2007, 01:35 PM
BTEC

good God!!! quality footage.
09-01-2007, 01:39 PM
Ed

this thread is just insane. this is one crazy build. this guys deserves more than 3 rep bars.
09-01-2007, 01:42 PM
puregroove

Quote:

Originally Posted by YSLBTT

this thread is just insane. this is one crazy build. this guys deserves more than 3 rep bars.

+1 :yes: repping whenever I can. LOL
09-01-2007, 01:47 PM
B18c1Turboed

Quote:

Originally Posted by KPowerEP3

I'm assuming this is more of a 'race only' car, since you're deleting AC and heat. I'm sure all the emissions related stuff, but what else?

Thats dumb!! just becsaue he removed all that ,dont mean its a race car! Their are alot of daily driven hondas that dont have that stuff any longer!!!

Usally when people do swaps , they always remove AC and emissions stuff, do a poll, so i guess all those are races car too....
09-01-2007, 03:34 PM
SL65AMG

OMFGFGFGFG SEX FTMFW!!!!!!

i think ive had a hard on the whole time ive been reading this.... holy FUCKKKKKK!!!!!! i was gonna do some shit to my rex.... but now im thinking of going this route!!!! how much did the paint cost ya?

dude

props

id like to shake your hand someday....

i dont know how to give more than +1 but i dont think it matters.....theres other people for that
09-01-2007, 03:41 PM
speedminded

Quote:

Originally Posted by SL65AMG

i think ive had a hard on the whole time ive been reading this.... holy FUCKKKKKK!!!!!! i was gonna do some shit to my rex.... but now im thinking of going this route!!!! how much did the paint cost ya?

Paint is cheap compared to the time spent & labor of prepping everything if you were to pay someone else to do it. Bodywork is just as important at the spray job itself.
09-01-2007, 03:59 PM
ZedEx

Wow... I just read through the entire thread.

Man, what a project. I'm very impressed.

+1 for you.
09-01-2007, 04:26 PM
cactusEG

any more pics ??
09-01-2007, 05:52 PM
TRUTH

:bow::bow::bow::bow::bow::bow::bow::bow::bow::bow: :drink: NICE
09-01-2007, 05:57 PM
SL65AMG

Quote:

Originally Posted by speedminded

Paint is cheap compared to the time spent & labor of prepping everything if you were to pay someone else to do it. Bodywork is just as important at the spray job itself.

convenient that his bro is a painter.....
09-01-2007, 06:05 PM
TwoPointOhh

cleen paintjob you got there....
09-01-2007, 09:32 PM
KPowerEP3

Quote:

Originally Posted by B18c1Turboed

Thats dumb!! just becsaue he removed all that ,dont mean its a race car! Their are alot of daily driven hondas that dont have that stuff any longer!!!

Usally when people do swaps , they always remove AC and emissions stuff, do a poll, so i guess all those are races car too....

NO but the removal of the heater core and doing a heat bypas would be a good hint. Most people DON'T bother with that.
09-01-2007, 09:44 PM
JDMjoe

Looks good so far man, can't wait to see the end result! :goodjob: reps for you sir
09-01-2007, 11:14 PM
Fuster_Cluck

You guys are awesome with the props :cheers:

Well, the car is going to be far from a daily driver. It's being built for speed but mostly so to enjoy on my days off when I want to rip around town. I plan to track the car in both drag and auto-x for strictly pleasure.....
Since the car is being built for speed I am removing as much as possible. I will be removing all the unused wires from the wire harness and of course I will have pics of the entire process. This is something that will most likely take place close to winter.....

As far as the hose being close to the header. I'm going to take a look tomorrow and if it's close I may shorten the loop :goodjob:

So, my baby is back home again :idb: :yes: :bump:

Pics coming & here's what I worked on last night:

Man, the Hasport PDF installation is a waste of space/time and the pictures are about equal to a 1st grader drawing

Basically stuck with a bag of bolts and hardware :cry:

I'm putting the pieces of the puzzel together between the HASport instructions and Poison's K20 how-to swap....

Here are the bolts with each labeled with their size:

http://i121.photobucket.com/albums/o..._6205_rs35.jpg

The nuts and washers:

http://i121.photobucket.com/albums/o..._6209_rs35.jpg

With the help from K20a.org I was able to figure out most of the bolts, so I deleted the questions.

More to come & thanks for looking :police:
09-01-2007, 11:17 PM
Fuster_Cluck

Here is the tranny mount installed. Most likely going to leave the 2 OEM studs for now. Probably go back after the show and remove them to install the 2 HASport bolts for a cleaner look:

HASport supplied a spacer for the tranny mount, but looks like they have added it to the mount now. So, the spacer is not needed:

http://i121.photobucket.com/albums/o..._6223_rs25.jpg

http://i121.photobucket.com/albums/o..._6225_rs25.jpg

More to come & thanks for looking :police:
09-01-2007, 11:20 PM
Whiteboy™

TEH SEX
09-01-2007, 11:42 PM
Z32redondo

Hey I got a quick question. How much did you pay for the full paint job?
09-02-2007, 12:02 AM
mushroom_toy

MORE PICS!!!!!!!!!!!!
09-02-2007, 12:10 AM
Fuster_Cluck

Quote:

Originally Posted by NSCredondo

Hey I got a quick question. How much did you pay for the full paint job?

Not much. The materials is what cost me. My bro painted the car, so you know I got hooked up on that :yes:

Well, I have a lot of work ahead of me, but things are going smoothly at this point. Tomorrow (Sunday) is a big day.....

So, I present Session 043 (Fridays work). It's been a while since I have posted a session, but to get her done it's going to take many long sessions. Well, let's get to it......

I started the day off by taking pics of this bad mo-fo I scooped from a K20a.org member :goodjob: :cheers:

http://i121.photobucket.com/albums/o..._6134_rs35.jpg

http://i121.photobucket.com/albums/o..._6136_rs35.jpg

OEM exhaust manifold gasket: (tab goes on the head)

http://i121.photobucket.com/albums/o..._6138_rs35.jpg

After taking pics I decided to unwrap some of the cabin harness since I won't need most of the wires and they will eventually get deleted:

http://i121.photobucket.com/albums/o..._6140_rs35.jpg

Cut the tie wrap:

http://i121.photobucket.com/albums/o..._6142_rs35.jpg

Just start removing $hit and getting really sticky: :2up:

http://i121.photobucket.com/albums/o..._6143_rs35.jpg

http://i121.photobucket.com/albums/o..._6145_rs35.jpg

Dead weight :gay:

http://i121.photobucket.com/albums/o..._6146_rs35.jpg

Before:

http://i121.photobucket.com/albums/o..._6147_rs35.jpg

After:

http://i121.photobucket.com/albums/o..._6148_rs35.jpg

Bunch of useless crap:

http://i121.photobucket.com/albums/o..._6150_rs35.jpg

Remove the tape and remove the box:

http://i121.photobucket.com/albums/o..._6152_rs35.jpg

Nice:

http://i121.photobucket.com/albums/o..._6154_rs35.jpg

Got tired of fooling with the wiring, so I jumped to the seat. The hardware store only had enough for one seat, so one seat was completed. Man, it was a b!tch. Took me at least an hour to put together. $hit has to be lined perfectly or got to loosen the bolts and adjust :doh:

Start with a seat bracket and rails mounted:

http://i121.photobucket.com/albums/o..._6156_rs35.jpg

Cool pic:

http://i121.photobucket.com/albums/o..._6157_rs35.jpg

12.9 grade:

http://i121.photobucket.com/albums/o..._6158_rs35.jpg

Seat the sliders need to mount to:

http://i121.photobucket.com/albums/o..._6161_rs35.jpg

Ready to mount, right?

http://i121.photobucket.com/albums/o..._6164_rs35.jpg

Took measurements: (tripod FTW)

http://i121.photobucket.com/albums/o..._6168_rs35.jpg

Looking good:

http://i121.photobucket.com/albums/o..._6170_rs35.jpg

After 3 adjustments ended up with this:

http://i121.photobucket.com/albums/o..._6171_rs35.jpg

Then I test fitted the rest of the header while waiting on Pop's to arrive:

http://i121.photobucket.com/albums/o..._6174_rs27.jpg

http://i121.photobucket.com/albums/o..._6175_rs35.jpg

http://i121.photobucket.com/albums/o..._6176_rs35.jpg

http://i121.photobucket.com/albums/o..._6177_rs35.jpg

Pop's arrives:

http://i121.photobucket.com/albums/o..._6184_rs35.jpg

Pop's going to work:

http://i121.photobucket.com/albums/o..._6188_rs35.jpg

Drain the oil:

http://i121.photobucket.com/albums/o..._6183_rs27.jpg

It's clean:

http://i121.photobucket.com/albums/o..._6181_rs35.jpg

Drained the tranny:

http://i121.photobucket.com/albums/o..._6185_rs35.jpg

Extremely clean too:

http://i121.photobucket.com/albums/o..._6186_rs27.jpg

Pressure washing the motor:

http://i121.photobucket.com/albums/o..._6190_rs35.jpg

Pop's got sidetracked :crazy:

http://i121.photobucket.com/albums/o..._6192_rs35.jpg

Couple of pieces I'm guessing from the car that were somewhere sitting on the motor:

http://i121.photobucket.com/albums/o..._6193_rs35.jpg

Nice and clean:

http://i121.photobucket.com/albums/o..._6194_rs35.jpg

Drying with the fan after using compressed air for a bit:

http://i121.photobucket.com/albums/o..._6196_rs35.jpg

Saturdays work is done. Probably 30 pics to post of that...... They'll be posted tomorrow. Got to hit the sack and get ready for the long day ahead of me.....

Thanks for looking :police:
09-02-2007, 12:31 AM
ranj

BALLN'!!!
looks freaking amazing!!! i really can't wait to see it at some meets lol.
09-02-2007, 12:32 AM
ranj

600th POST!!! WOOOTTT LOL! :)

Show 100 post(s) from this thread on one page