Garage sale...DA shell,Honda parts must look

[lsvteceg954]

B16a head complete with aem fuel pressure regulater
Str fuel rail ,Skunk 2 cams and cam gears,
Skunk 2 retainers, valve cover,dizzy ,Vtec solenoid,Intake manifold has a small crack the head jus resurfaced on wensday itz complete ready to bolt on ..........will part out 850.00 obo

B16a block with new pr3 pistons about 20k on pistons
and 80k on the block stage 3 clutch masters
clutch brand new,aluminum flywheel block is complete 450.00 firm

90 gs acura integra shell has 266k on it
itz a rolling shell complete interior all the shell
needs is a hood and the housing for the radio and ashtrey
thats it the car is primer ready for paint except front
and rear bumper it has a 93 gsr front and rear bumper
800.00obo

(rare)ys1 (cable) GSR tranny its perfect no grinds
im not sure on the miles but i know its good 400.00 firm


Apex-i vafc (vtec)controller works with no problems 120.00obo


AEM short ram intake for 90-93 integra(red) $70.00obo

Dual gauge pod clean black $15.00 firm

Exhaust it came off a EK coupe its real
nice dont really kno the brand but its clean and nice
and sounds good $65.00 obo

Accel Spark Plug Wires (red) clean 8mm $30.00 firm


D-series ac system works might be missing
a line but other than that its complete $50.00 firm

DA integra passenger and driver mounts with hasport inserts
perfect conditioN and a stock back mount......all 3 for $175.00


WILL TRADE EVERYTHING ABOVE FOR A STOCK EG,EKor DC


Stock d-series fuel rail $15.00


Mugen neck pillows $20.00

Msd box 6a model:6200 $80.00
Will have vins available upon request.


























Ractive Shift Knob $10

[BlackEj6]

bump!!!! good prices sean

[mccoy1178]

Exhaust it came off a EK coupe its real
nice dont really kno the brand but its clean and nice
and sounds good $65.00 obo

is this a full catback? can i hear it? u got any pics? lmk thanx
Mccoy

[BLk92DA]

dibs on the AEM FPR..lmk

[BLk92DA]

will u just part out the front bumper support on the DA? is it a 93 also?

[lsvteceg954]

Exhaust it came off a EK coupe its real
nice dont really kno the brand but its clean and nice
and sounds good $65.00 obo

is this a full catback? can i hear it? u got any pics? lmk thanx
Mccoy

The exzaust is cut has alittle piping but the rest is cut off but i will try to post piks up 2morrow

[lsvteceg954]

will u just part out the front bumper support on the DA? is it a 93 also?

Im selling the shell complete but if it doesnt sell i will part out and lmk when u ready for the FPR.

[BLk92DA]

Im selling the shell complete but if it doesnt sell i will part out and lmk when u ready for the FPR.

im always ready if the price is right. lmk



and would u mind if i get the speedo cable thangy off the DA...errthang has a price. lmk

[Skidtron_97]

hey PM me your number, im interested in DA shell

[KA98S10]

i might be interested in the msd

[lsvteceg954]

i might be interested in the msd

IM located in mcdonough i can meet up i want $80 for the msd or if u have or can get rear disc conversion for a EK maybe we can work something out

[G_2_rcng]

thats my old car bump for a good dude the motor is one bad motha fu!%^& who ever gets that shit is goin to be very happy n good luck w/the sale sean n let me get that fuel rail n fpr from ya

[thinkskater]

bumps for you heard the engine run while G 2 racing had it , good guy , solid engine , i am interested in those cams pmed

[lsvteceg954]

bumps for you heard the engine run while G 2 racing had it , good guy , solid engine , i am interested in those cams pmed

Talk 2 G 2Racing he is suppose to pick up the head today so talk 2 him about the cams but if he doesnt pick it up ill sell em to you

[stackz]

what year d-series a/c setup is that??

can you pull the lines off the back of the compressor and turn the center of the clutch with your fingers over the holes and test for compression??

also, where you located??

[unc25]

Interested in the front bumper if your willing to part.... Ill even give you my perfect certifit bumper + cash so you can still sell the shell "complete"

I am just looking to complete the front with OEM parts instead of the certifit stuff.

[stackz]

Interested in the front bumper if your willing to part.... Ill even give you my perfect certifit bumper + cash so you can still sell the shell "complete"

I am just looking to complete the front with OEM parts instead of the certifit stuff.

a little off topic but why are you wanting to get rid of your certifit bumper??

does it not fit perfectly?? only reason I ask is because I was going to them on wednesday to buy a front/rear bumper for my 93 hatch but if their fit isnt great then I'll just pass and keep looking for good used ones...

[lsvteceg954]

what year d-series a/c setup is that??

can you pull the lines off the back of the compressor and turn the center of the clutch with your fingers over the holes and test for compression??

also, where you located??

It came of a 91 crx and im located in mcdonough...and i neveer really tested it like that the ac system came of my old car

[unc25]

Certifit<USED OEM<NEW OEM.....just a good rule of thumb
If you can buy a good used one you might as well since itll be oem fit as opposed to sorta-fit. Its kinda hit or miss with them.

SO I guess the answer is not on swapping plus cash on that bumper then huh?

[lsvteceg954]

bump!!!!!!!!!!!!!!

[lsvteceg954]

someone come pick everything up for $1800

[Soloboy]

How low will u go for the HEAD let me know..
!!!!

[UpSideDownDesi]

how much for cam gears?

[lsvteceg954]

i got a trade pending rite now but if it doesnt go threw ill pm you both back

[Adro4205]

i want the vtec contoller. How much is it going for.

[I.G.R Epyon]

interested in the GS-R tranny
would be willing to meet up on weds to pick up
400 firm right

[lsvteceg954]

For the vtec controller i want $120 and the Head Block and tranny and the shell s pending right now because of a trade but....yea im selling the tranny for $400 its in perfect condition and if the deal doesnt go threw the i will definetly pm u(I.G.R EPYON)

[BLk92DA]

so the speedo cable?

[hutto04]

I was wondering how much you wanted for the cams, cam gears, and retainers individually and then all together. Could you please reply a.s.a.p.

[lsvteceg954]

up

[SimpleyStock]

i want the neck pillows..lol call 404 545 3534...

[lsvteceg954]

i want the neck pillows..lol call 404 545 3534...

i will get in contact with you 2day

[G_2_rcng]

what you got left?

[lsvteceg954]

call me ill let u kno and i wanna come by n see how the crx runs

[Complete]

300 for the shell

[BlackEj6]

i want the neck pillows..lol call 404 545 3534...

Called,Left a message,no response..

[lsvteceg954]

bump!!!!!

[lsvteceg954]

soloboy i pmed u my number

[Soloboy]

Damn I just want the Head, You cant Work something man.. Im definitely interested, if the HEAD is in Good Condition!!!,,, Can you get any close up's on the Valves'? And Spring/retainers!

[lsvteceg954]

Damn I just want the Head, You cant Work something man.. Im definitely interested, if the HEAD is in Good Condition!!!,,, Can you get any close up's on the Valves'? And Spring/retainers!

yea ill work something out ill let you kno 2moro tho ill get the piks up 4 u to ah do u still have that blk coupe