Results 1 to 16 of 16

Thread: FS:JDM OBD1 95 H22A swap

  1. 04-14-2007, 08:24 PM #1
    nextelbuddy
    nextelbuddy is offline
    stock
    Join Date
    Apr 2005
    Location
    Norcross
    Age
    45
    Posts
    479
    Rep Power
    21

    Default FS:JDM OBD1 95 H22A swap

    Seling for a good friend of mine.

    asking 1500 for everything listed below. price is OBO

    the rings went bad. motor still runs but smokes from the PCV hose thats how we know there is blow by. new set of rings and you are good to go.

    this is a 95 JDM H22A swap. comes with 5 speed H22A tranny no grinds and a JDM P13 ECU and a spare OBDII to OBDI Jumper harness

    the swap was purchased with the typical "its jdm and they only have about 30k miles" statement and the motor was only run for about 5000 miles since we have had it.







    Last edited by nextelbuddy; 04-22-2007 at 10:32 PM.
    Nikon D300s|SB900|Nikkor 70-200 f2.8 VR I| Tamron 17-50 f2.8

    Reply With Quote Reply With Quote
  2. 04-15-2007, 05:17 PM #2
    K24cb7coupe
    K24cb7coupe is offline
    Senior Member
    Join Date
    Mar 2005
    Age
    43
    Posts
    2,071
    Rep Power
    24

    Default

    2k?
    About to approach beast mode
    Reply With Quote Reply With Quote
  3. 04-15-2007, 06:17 PM #3
    PawnShopCEO
    PawnShopCEO is offline
    Senior Member
    Join Date
    Jan 2003
    Location
    kennesaw ga
    Age
    43
    Posts
    1,596
    Rep Power
    24

    Default

    you gotta be kidding.. the motor has to be completely torn down and rebuilt to replace the rings. I say this motor is worth around 1200 with the tranny and ecu
    Reply With Quote Reply With Quote
  4. 04-16-2007, 01:34 AM #4
    nextelbuddy
    nextelbuddy is offline
    stock
    Join Date
    Apr 2005
    Location
    Norcross
    Age
    45
    Posts
    479
    Rep Power
    21

    Default

    Quote Originally Posted by accordm3
    you gotta be kidding.. the motor has to be completely torn down and rebuilt to replace the rings. I say this motor is worth around 1200 with the tranny and ecu

    price is OBO

    also for a skilled DIY this is not even but a few hours work.

    the head is flawless and the rest of the shortblock is in great shape. its not like their is a hole in the block with bent mangled rods.
    Nikon D300s|SB900|Nikkor 70-200 f2.8 VR I| Tamron 17-50 f2.8

    Reply With Quote Reply With Quote
  5. 04-16-2007, 07:54 AM #5
    MoonScryer
    MoonScryer is offline
    Stuck at the red light.
    Join Date
    Feb 2004
    Location
    Roswell
    Posts
    109
    Rep Power
    22

    Default

    Price is a bit high, and I doubt you would accept my OBO. Bump for a rebuildable option.
    Last edited by MoonScryer; 04-16-2007 at 08:15 AM. Reason: Removed offer.
    Reply With Quote Reply With Quote
  6. 04-16-2007, 11:47 AM #6
    n8dzlespekv
    n8dzlespekv is offline
    Unknown
    Join Date
    Apr 2007
    Age
    40
    Posts
    2
    Rep Power
    0

    Default

    I think its worth 1500
    Reply With Quote Reply With Quote
  7. 04-18-2007, 04:15 PM #7
    nextelbuddy
    nextelbuddy is offline
    stock
    Join Date
    Apr 2005
    Location
    Norcross
    Age
    45
    Posts
    479
    Rep Power
    21

    Default

    Quote Originally Posted by n8dzlespekv
    I think its worth 1500

    i can do 1700 for everything.
    Nikon D300s|SB900|Nikkor 70-200 f2.8 VR I| Tamron 17-50 f2.8

    Reply With Quote Reply With Quote
  8. 04-18-2007, 05:19 PM #8
    lsxtreme
    lsxtreme is offline
    Banned lsxtreme's Avatar
    Join Date
    Oct 2005
    Age
    43
    Posts
    1,654
    Rep Power
    0

    Default

    still is already swapped into a hatch or still in prelude shell?
    Reply With Quote Reply With Quote
  9. 04-18-2007, 08:42 PM #9
    nextelbuddy
    nextelbuddy is offline
    stock
    Join Date
    Apr 2005
    Location
    Norcross
    Age
    45
    Posts
    479
    Rep Power
    21

    Default

    Quote Originally Posted by lsxtreme
    still is already swapped into a hatch or still in prelude shell?


    its actually in a 94 honda accord currently
    Nikon D300s|SB900|Nikkor 70-200 f2.8 VR I| Tamron 17-50 f2.8

    Reply With Quote Reply With Quote
  10. 04-18-2007, 08:53 PM #10
    mikebluS2G
    mikebluS2G is offline
    <--I LUV DA TWISTIES... mikebluS2G's Avatar
    Join Date
    Aug 2006
    Location
    charlotte
    Age
    37
    Posts
    1,096
    Rep Power
    21

    Default

    sick m3!.....so free bummp
    Reply With Quote Reply With Quote
  11. 04-22-2007, 10:32 PM #11
    nextelbuddy
    nextelbuddy is offline
    stock
    Join Date
    Apr 2005
    Location
    Norcross
    Age
    45
    Posts
    479
    Rep Power
    21

    Default

    bump
    Nikon D300s|SB900|Nikkor 70-200 f2.8 VR I| Tamron 17-50 f2.8

    Reply With Quote Reply With Quote
  12. 04-22-2007, 10:36 PM #12
    WhiteAccord
    WhiteAccord is offline
    Supra Equipped WhiteAccord's Avatar
    Join Date
    Jan 2006
    Location
    At Home
    Posts
    7,318
    Rep Power
    29

    Default

    hmmmm 94 accord...
    i wonder if it would fit in my 00 accord without mods...
    Reply With Quote Reply With Quote
  13. 04-23-2007, 01:03 AM #13
    an0therh22
    an0therh22 is offline
    h series
    Join Date
    Jun 2006
    Location
    norcross
    Posts
    1,968
    Rep Power
    21

    Default

    Quote Originally Posted by WhiteAccord
    hmmmm 94 accord...
    i wonder if it would fit in my 00 accord without mods...
    let me know if u figure that out. i know someone with an h22 01 but i didnt ask how hard it was.

    bump for a bad ass motor. F - k series


    Reply With Quote Reply With Quote
  14. 04-23-2007, 03:15 PM #14
    manilikecars
    manilikecars is offline
    ROLLING DEEP manilikecars's Avatar
    Join Date
    Aug 2006
    Location
    Ooltewah
    Age
    43
    Posts
    1,237
    Rep Power
    21

    Default

    have you checked to make sure the cylinder walls are not scorched or you just assuming that they are not? yeah it is alittle high you can find h22 swaps for 1000 bucks now. We bought one for 700.
    Reply With Quote Reply With Quote
  15. 04-29-2007, 02:32 PM #15
    o_bomb
    o_bomb is offline
    Banned
    Join Date
    Jul 2006
    Location
    ATL
    Age
    43
    Posts
    654
    Rep Power
    0

    Default

    Quote Originally Posted by Pearlwhitesh
    have you checked to make sure the cylinder walls are not scorched or you just assuming that they are not? yeah it is alittle high you can find h22 swaps for 1000 bucks now. We bought one for 700.

    A whole swap for 700??? let me know I will buy 2!!
    Reply With Quote Reply With Quote
  16. 10-23-2007, 10:27 PM #16
    gotrice?
    gotrice? is offline
    gotrice? gotrice?'s Avatar
    Join Date
    Aug 2006
    Location
    gwinnett county
    Age
    37
    Posts
    911
    Rep Power
    20

    Default

    how much will u sell the trans for and the ecu??? i have a h22a swap in my ek and im lookin for a trans, and all the things to convert it to obd2
    Reply With Quote Reply With Quote
« DSM 950cc injectors 200 firm | DTec with game boy »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!