JR B-series MP62 supercharger

[Cool Cat Racing]

I've got most of a kit here for sale. The only major piece missing is the intake manifold. This can be had from the JR website for about $250 for either a B16/B18C1-5. The kit doesn't have many miles on it but I do not know the exact mileage. It comes with only the 11psi and the 8psi pulleys as I no longer have the stock pulley. I was running on a Hondata computer with 440cc injectors and pulled 273whp on a GSR so these kits can make some nice power without much fuss. Looking for $1100 obo.

[Doppelgänger]

hey Ryan, think theres a way to get that on the miata?

[Cool Cat Racing]

yea, they have an MP62 kit already. Though JR doesn't list the stuff on the website yet I can get the MP62 brackets, outlet pipe, and dummy but I don't want to go through the hassles when the one I have is enough for me.

[Doppelgänger]

how much you think all the brackets would cost? i might sell my charger and go this way....or i would like to....

[97_luder]

will the 8psi pulley work for the h22 JR supercharger and if so will you part out one of the pulleys

[Cool Cat Racing]

I honestly don't know if it will fit or not.

[USDM CTR]

damnnn u pull 273whp on a stock gsr?? with hondata and 440cc? where u get it tune at??

[Cool Cat Racing]

I'm not sure where the car was originally tuned. Its coming off a friend of mines car and I'm selling it for him as it is sitting here at my shop and he no longer wants it.

[Cool Cat Racing]

Bump

[Annihilation]

hey Ryan, think theres a way to get that on the miata?

I dunno if it will work...the honda Bseries run in reverse rotation ( counterclockwise) so wouldnt you need to run the miata or the supercharger counterclockwise somehow...... idk just make sure it runs the other way

[type-r swap]

hey wanna part out the 11psi pulley lmk

[Cool Cat Racing]

For right now I'm going to try to get rid of the kit as a whole since it will be easier to sell with more options on it.

[koston100]

Got anything for an acura integra ls 97. Also could you install it. Will pay for labor. PM me

[Marty]

how much you think all the brackets would cost? i might sell my charger and go this way....or i would like to....

Right around $1000. I had to buy all the new BRP stuff for my 62.

[Cool Cat Racing]

Bump

[type-r swap]

com'on part the pulley

[Cool Cat Racing]

I'll ask him if he wants to part out the pulleys or not. Koston100, there is no manifold for an MP62 on an LS head and this is currently the only SC I have for a honda.

[Cool Cat Racing]

Bump

[NBP01LS]

Okay, correct me if I'm wrong but wouldn't this work for an ls? Only difference is the intake manifold, which you don't have, so just order the ls manifold and your good. Right?

[drtyhatch]

Okay, correct me if I'm wrong but wouldn't this work for an ls? Only difference is the intake manifold, which you don't have, so just order the ls manifold and your good. Right?

yes you are correct

[Cool Cat Racing]

No, you are not correct. The LS manifold is for an M45, not an M62. The flanges are different sizes and will not bolt up. If you find a manifold from somewhere else it may bolt up but I don't know if the rest of the bracketry to move the alternator will work anymore.

[type-r swap]

can someone tell him to part the pulley i want

[Cool Cat Racing]

I asked him and he's going to try for another week to sell it together, if it doesn't sell I'll PM you and he'll let go of the pulley.

[type-r swap]

I asked him and he's going to try for another week to sell it together, if it doesn't sell I'll PM you and he'll let go of the pulley.

aight kool if so ill pick it up in the speed of the limit

[UpSideDownDesi]

works with a B18C1? and i would like to know how did it make 273whp coz most of the setups i have seen...run out of air around 220 or 230whp.

[japan4racing]

273whp??? what boost level? was this on a mustang dyno or a dynojet? btw whos car was this on? i know most of the ppl around macon and warner robins

[Cool Cat Racing]

It was on Hunter's teg. That's what he said he topped out on with a Hondata and 11psi. As for which dyno I don't know.

[Cool Cat Racing]

works with a B18C1? and i would like to know how did it make 273whp coz most of the setups i have seen...run out of air around 220 or 230whp.

it will work with any of the Vtec B series motors since the only difference in the kits is the manifolds and that will need to be purchased separately.

[japan4racing]

It was on Hunter's teg. That's what he said he topped out on with a Hondata and 11psi. As for which dyno I don't know.

[4U2NV_FLC]

Hey man I AM VERY interested in dropping a supercharger in my miata.. have any suggestions (good priced supercharger) if so willing to pay for installation i want a CLEAN INSTALL. Thanx for your time

[UpSideDownDesi]

It was on Hunter's teg. That's what he said he topped out on with a Hondata and 11psi. As for which dyno I don't know.

JR sells the whole kit (same setup here) with the Hondata and 440 injectors and they were only able to get in 240whp range. I am not flamin....i am interested and trying to get info. If you can get setup, dyno and other info from your friend... that will be great.

[Cool Cat Racing]

If you talk to the people at JR they are very conservative since they are selling them to the general public. You can easily make more power with better tuning.

[ksniperfox]

bump for a fellow JR owner.


if all you desire is pulley upgrades, visit www.supercharger.com and feel free to contact them over the phone. ive always had awesome service and technical advice. looks like the 3.4' pulley is the 11psi one, just call them up and ask how much.