Results 1 to 12 of 12

Thread: amp troubleshooting

  1. #1
    Certified Gearhead FAMOUS's Avatar
    Join Date
    Jun 2003
    Location
    lilburn, GA, USA
    Posts
    452
    Rep Power
    0

    Default amp troubleshooting

    i have a audiobahn amp and it has a power and protection light on the back. the protection light is lit up and power is not. so my subs are not working. the manual says if the protection light is on then the problem is either input over load or a short circuit. how do i tell if either of these are the problem? i checked with a light and two wires to see if all the wires have power and all do, so now i am stuck. please help
    Mike
    2003 Honda Civic LX

    www.sprayglo.com

  2. #2
    Carless Ericp's Avatar
    Join Date
    Sep 2006
    Location
    McDonough
    Age
    38
    Posts
    4,713
    Rep Power
    24

    Default

    check to see what OHM rating your subs are. Then check to see which OHMs your amp is capable of. If it is not wired correctly, the wires coming from your amp to your subs, then you are probably overloading your amp causing it to run hot. Short circuit means you have a short to ground. Check your power wire going to the amp to make sure it is not pinched or touching any form of metal. If everything checks out it's an internal problem and your amp is most likely done.

  3. #3
    Certified Gearhead FAMOUS's Avatar
    Join Date
    Jun 2003
    Location
    lilburn, GA, USA
    Posts
    452
    Rep Power
    0

    Default

    mys subs are 4 ohm and my amp is also. i am going to look into it and hopefully it will be ok
    Last edited by FAMOUS; 10-23-2006 at 09:18 PM.
    Mike
    2003 Honda Civic LX

    www.sprayglo.com

  4. #4
    Moderator BanginJimmy's Avatar
    Join Date
    Oct 2005
    Location
    Hiram, GA
    Age
    46
    Posts
    7,499
    Rep Power
    31

    Default

    what model number amp and subs do you have. Are the subs 4ohm DVC or SVC? Low ohm will give send your amp into protect. Doesnt sound like a blown fuse since your protect light is on. How many volts does your amp see? If it gets too low then it may also shut down for low current.

  5. #5
    em1 duck2k6's Avatar
    Join Date
    Sep 2005
    Location
    10 cars ahead of you
    Age
    49
    Posts
    370
    Rep Power
    21

    Default

    also if the ground is not good the protect light will come on. and like the other guy said it might be pinched some where. when you turn the car on the next time check and see if it turns green first. if it does it is a minor wiring problem.

  6. #6
    Senior Member | IA Veteran DJ XtRaK©'s Avatar
    Join Date
    Apr 2001
    Location
    Roswell
    Age
    41
    Posts
    7,506
    Rep Power
    32

    Default

    audiobahn amps = 50% defect rate out of the factory
    IA OG

  7. #7
    Moderator BanginJimmy's Avatar
    Join Date
    Oct 2005
    Location
    Hiram, GA
    Age
    46
    Posts
    7,499
    Rep Power
    31

    Default

    Quote Originally Posted by DJ XtRaK©
    audiobahn amps = 50% defect rate out of the factory

    I see their quality numbers are going up

  8. #8
    Senior Member | IA Veteran DJ XtRaK©'s Avatar
    Join Date
    Apr 2001
    Location
    Roswell
    Age
    41
    Posts
    7,506
    Rep Power
    32

    Default

    100% according to me
    IA OG

  9. #9
    Certified Gearhead FAMOUS's Avatar
    Join Date
    Jun 2003
    Location
    lilburn, GA, USA
    Posts
    452
    Rep Power
    0

    Default

    the ligt is blue and the model number is a400t i think.... the ground is ok and i think all the wiring is good. i guess my amp is done. i was told by the seller at frys that this was a good amp to push my two JL 12 w0s, but i guess not. my ground is good and no pinch of the wiring. o well thanks for all the help
    Last edited by FAMOUS; 10-26-2006 at 12:23 PM.
    Mike
    2003 Honda Civic LX

    www.sprayglo.com

  10. #10
    A.D.I.D.A.S. §treet_§peed's Avatar
    Join Date
    Dec 2005
    Location
    Gainesville
    Age
    38
    Posts
    24,950
    Rep Power
    50

    Default

    audiobahn blows anyways imo...special there cheaply made speakers...i mean yeah there all flashy and wht not..but there performance and realiability blows imo.....
    You know better; next time will be a ban.

  11. #11

    Default

    a.YOUR SUBS ARE AT TOO LOW OF AN OHM LOAD
    b.YOUR AMP IS SMOKED(AFTER ALL IT IS AUDIOBAHN)
    ..PIC ONE
    +-

  12. #12
    A.D.I.D.A.S. §treet_§peed's Avatar
    Join Date
    Dec 2005
    Location
    Gainesville
    Age
    38
    Posts
    24,950
    Rep Power
    50

    Default

    haha...just choose a better setup next time... hel i got my shit at the flea market... 2 comp 12" MA Audio subs, cutoms built box, with a Performance Technique 800 watt amp, and some of brand wire kit...that shit hard as fuck 170 DB..and i tryed to blow the subs by turning up the bass boost on my cd player and amp al the way and turning the volume all the way up and popping the trunk, and letting it play for about 3 hours with a bass tester cd and they still hit around 160 and that was after a years use before trying to blow them.....
    You know better; next time will be a ban.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!