
Originally Posted by
DynamicSound
He has all 4 bridged...1/3 running 4 speakers...2/4 running 1 sub.
As long as you ran the 4 speakers to a 4ohm load (parallel down/series up or series up/parallel down) then it is not a ohm load problem since you said your sub is a single 4ohm.
As far as the wiring, as long as you bought a kit all the wiring would be the same, so that would not be it. I was speaking more of if you mixed wires and even through they both are 4 gauge, one my be a cheap 4 gauge with more insolation than normal.
The last thing to check is to make sure your gain is not turned up too much. That can cause the amp to shut off.