help with an amp

[BanginJimmy]

there are 3 ways you can wire these subs up; 1. run parallel into 1ohm

correct

in series to an 8ohm laod or

wrong. running both subs in series will result in a 16ohm load.

3. you can run these in a 4ohm operation.

correct. This is called series/paralell wiring


[IMG]http://mobile.jlaudio.com/graphics/S...C_Series_2.gif[/IMG]

as far as your amp is concrened both of your subs are 800watt max and 400watt rms (continuous power) so you will need an amp that is capable of a 1ohm load which would let you run a smaller amp and still get mega power. i would recommend a mono amp that will push 400watts rms @ 1ohm.

why would you only want 400wrms at 1 ohm when you are using 2 D4 subs that are 400wrms each?

why? because your subs will sound like 800 watts.

this is a joke right?

how? each sub will see 400watts of power not just one of them. and its easier for an amp to push that kind of power at 1ohm and it will be harder to find one and more expensive to push that @ 4ohms. 400watt mono amps that are 1ohm stable can get you 400watts rms, @ 4ohms you would need a really good 800watt amp. can you see the price difference?

What the hell are you talking about?

LMK if u have anymore questions

please dont post in this section anymore. You arent doing anything more than spouting wrong info.