blew my amp again..

[1NonlyAccord]

well see the situation was, im guessing when u took a corner the box came unscrewed and slid across the trunk along with the amp and i thought mayb the power and ground touched or somthing, But the amp it self has 2 of the big 60A fuses,and i just changed my fuse block and holder from the battery last week and none were blown.

amp dosnt power on, not even protection mode or light.

[THEONE]

well see the situation was, im guessing when u took a corner the box came unscrewed and slid across the trunk along with the amp and i thought mayb the power and ground touched or somthing, But the amp it self has 2 of the big 60A fuses,and i just changed my fuse block and holder from the battery last week and none were blown.

amp dosnt power on, not even protection mode or light.

heres how you can test for power. just take 3 wires 1 ground 1 power and 1 remote wire. pop your hood and test it right on the battery. just use a small remote wire and hook it to the power wire. so power wire and remote wire together to the positive terminal and the ground is to the negative terminal.

if it does not come on testing like this then there is something up inside the amp. good luck

[1NonlyAccord]

heres how you can test for power. just take 3 wires 1 ground 1 power and 1 remote wire. pop your hood and test it right on the battery. just use a small remote wire and hook it to the power wire. so power wire and remote wire together to the positive terminal and the ground is to the negative terminal.

if it does not come on testing like this then there is something up inside the amp. good luck

thanks..ill go try that in a little bit.

if anything,when i took the fuses out yesterday to check one sparked when i pulled it out?