****ed up amp???

[SL65AMG]

so my amp is brand ****ing new and it doesnt work....

theres 11.4x volts going to the power block on the amp but after that it doesnt do ****. no blue light saying its on or anything. its an alpine mrf-450

ground is fine
power is fine
yes, its hooked up correctly
....GRRRRRRR *anger*

anyone have this happen to them before? suggestions?

[b@d @pple]

12 volts on remote wire also?

[patrick4588]

remove the remote wire and see if it powers on. you will need to hook it back up to prevent draining the battery, but that could help narrow down the problem. if its brand new, it should have a warranty in case it doesnt work. assuming its hooked up correctly, i would check your connections. maybe its not grounding out properly. try sanding down the grounding point if you havent already

[SL65AMG]

remove the remote wire and see if it powers on. you will need to hook it back up to prevent draining the battery, but that could help narrow down the problem. if its brand new, it should have a warranty in case it doesnt work. assuming its hooked up correctly, i would check your connections. maybe its not grounding out properly. try sanding down the grounding point if you havent already

i dont have a remote wire hooked up.... is it necessary? i thought that was a n optional thing???

[Accordingly]

You need it. It tells the amp to turn on. 12volt remote turn on wire from back of head unit.

[patrick4588]

without the remote wire, if its hooked up correctly, then the amp will be on all the time and will drain your battery

[b@d @pple]

i dont have a remote wire hooked up.... is it necessary? i thought that was a n optional thing???

this is why you dont do sh!t yourself if you dont what your doing

[sina518]

this is why you dont do sh!t yourself if you dont what your doing

[SL65AMG]

this is why you dont do sh!t yourself if you dont what your doing

gotta learn somehow. did you learn **** by having other people do it?

[SL65AMG]

without the remote wire, if its hooked up correctly, then the amp will be on all the time and will drain your battery

the amp doesnt turn on at all.... even without the remote turn on wire

[patrick4588]

sure you didnt hook up the wires wrong? tried a new grounding spot? you do have it grounded to the frame right?

[Z32redondo]

the amp doesnt turn on at all.... even without the remote turn on wire

I have actually never had an amp just stay on when I had no remote wire. In fact it shouldnt. The remote wire just completes the circuit and make everything power on when it is powered on, and off when it is off. Without it the amp wont do anything. This is me speaking from personal experience only though.

And I learned the same way you did man so just keep doing your thing. I had my dad to help guide me through it and after the first initial install I have done all my own installs including tv's, DVD players, numerous high wattage systems, and more. Its that first initial learning experience and then you finally understand how audio systems work and then everything else just seems easy. +1 for doing it yourself most people dont want to take the time to learn and just pay someone.

[BanginJimmy]

the blue or blue/white wire coming off the headunit harness is the remote. Run a 16awg wire from there to the remote terminal on your amp. The amp will not turn on without running that wire or running a 12v constant ot the remote terminal on the amp.

[Z32redondo]

the blue or blue/white wire coming off the headunit harness is the remote. Run a 16awg wire from there to the remote terminal on your amp. The amp will not turn on without running that wire or running a 12v constant ot the remote terminal on the amp.

^^^

[SL65AMG]

the blue or blue/white wire coming off the headunit harness is the remote. Run a 16awg wire from there to the remote terminal on your amp. The amp will not turn on without running that wire or running a 12v constant ot the remote terminal on the amp.

thanks man. my amp may not be ****ed up after all. hell its brand new theres no reason for it to be broken.

+1 for all the people who gave me valuable info.

[deady]

if you just want to check the amp's functionality, just jump a wire from your current 12v constant terminal, into the remote's terminal at the amp. Although im willing to bet there's nothing wrong with that amp, Alpine's DOA products are few and far between...

[SL65AMG]

remote wire fixed the problem. thanks guys

[Z32redondo]

No problem man^^^

[BanginJimmy]

damn is we smart

[khailon]

[tubby]

lol at this thread.

[b16ftw]

haha. yeah i did the same thing with the first system i hooked up. i forgot the remote wire.

[SOHC MONSTER]

without the remote wire, if its hooked up correctly, then the amp will be on all the time and will drain your battery

I have never seen an amplifier do such a thing.

[SRCRX]

Any updates???.....LoL

[MrBoostedCRX]

hey I can't message u back my phone is messing up...u got msn? aim? add me [email protected] for msn and aim is the same just without the @hotmail.com

[slimm]

without the remote wire, if its hooked up correctly, then the amp will be on all the time and will drain your battery

without the remote wire, the amp will not turn on at all.

[SL65AMG]

my amp works fine. and this thread should be dead. its old