Results 1 to 32 of 32

Thread: MY first attmept at glassing(PICS)

Hybrid View

  1. #1
    Senior Member redgst97's Avatar
    Join Date
    Nov 2002
    Location
    Cumming, GA
    Age
    53
    Posts
    1,318
    Rep Power
    25

    Default

    Quote Originally Posted by SRCRX
    not that I want to get into it, but I was speaking about this install,
    honda doors are in no way "infinite baffle" in a stock form.

    You don't think this will be a good way to get mid-bass?
    Comparing a sealed kick panel (the ones shown) versus a Honda door....I think the mid-bass will be "louder" from the door. The OVERALL sound has a WAY better chance of sounding good in the kick.... There are definate advantages and disadvantages to both places.

    Im not a big fan of a 2-way front stage, so lets get that part out of the way.


    I would have rather seen (if I was asked) the MB in the door (with proper sound damping), and the tweeter molded into the a-pillar. If I could have suggested a 3-way setup, it might go like this:

    Option 1: MB in the door (properly damped), 3 or 4" MR in the kick, and tweet on the a-pillar.

    Option 2: MB in the kick, and MR and tweet in the a-pillat (would have to be a 3" probably)

    Option 3: 6/7/8" MB in the door, and 4/5" coax in the kick....maybe component set, but the tweeter position would be a LOT different that what is being presented.


    ***Note**** I think the work being done is AWESOME for a first timer!!!!

    2007, 2008, & 2009 IASCA National SQi Champion Pro Ultimate
    Total of 5 National Sound Quality Championships.

  2. #2
    Senior Member SL65AMG's Avatar
    Join Date
    Mar 2005
    Age
    38
    Posts
    2,618
    Rep Power
    23

    Default

    Quote Originally Posted by redgst97
    Comparing a sealed kick panel (the ones shown) versus a Honda door....I think the mid-bass will be "louder" from the door. The OVERALL sound has a WAY better chance of sounding good in the kick.... There are definate advantages and disadvantages to both places.

    Im not a big fan of a 2-way front stage, so lets get that part out of the way.


    I would have rather seen (if I was asked) the MB in the door (with proper sound damping), and the tweeter molded into the a-pillar. If I could have suggested a 3-way setup, it might go like this:

    Option 1: MB in the door (properly damped), 3 or 4" MR in the kick, and tweet on the a-pillar.

    Option 2: MB in the kick, and MR and tweet in the a-pillat (would have to be a 3" probably)

    Option 3: 6/7/8" MB in the door, and 4/5" coax in the kick....maybe component set, but the tweeter position would be a LOT different that what is being presented.


    ***Note**** I think the work being done is AWESOME for a first timer!!!!

    yeah i had planned on putting everything in the door but wiring the door was going to be a PITA! also, the sheet that came in the box of speakers gave 4 options for where to put the speakers and their sound quality, from highest to lowest and the kick was ranked #1.

    ill play around with other options later i am just dying to hear these babies. and it sucks driving around with no radio/music.....

    to put in an antenna would i have to use a retractable CRX antenna or could i use a short, fixed antenna.... and where would i find either?...

    thanks for the praise, everyone
    EF SQUAD FTMFW!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!