Quote Originally Posted by BanginJimmy
you have both your subs and your speakers amped or just the subs?
If its just the subs, then double check your wiring. It sounds like a wiring issue if this started immediatly after installing the deck. Did you use a splice harness, or did you hardwire it? make sure you dont have the POS and NEG switched on the speaker. It will cause the speakers not to play. I know this because I had to fix it for an installer when I had to get some speakers swapped out in a hurry.
The speakers aren't blown because They worked right before installation and I had BRAND NEW ones that I was installing, like still in box just pulled out new. I tried hooking an old and new speak directly to the Front Left Front Right Rear Right and Rear Left wires DIRECTLY, I got nothing. The speakers are hooked up to the headunit not the AMP itself, I think my headunit is bad but it just doesn't seem likely that something like this would happen, thanks for the help so far guys keep it coming