Ok. did some work today!

stripping the miata by Flsimages, on Flickr

aero! by Flsimages, on Flickr

stripping miata by Flsimages, on Flickr

Wiring harness is out. engine is disconnected and all that jazz. Just have to drain the transmission and coolant so i can pull the radiator and driveshaft. at that point, i can pull the body off so we are right on the plan to pull the body by sunday

also fitted some parts. Test fit the brake master, and fully fitted the clutch pedal and master cylinder (note, it is different than yours, i have mine powering a hydraulic conversion on a ford t-5 transmission)

fitment issue by Flsimages, on Flickr
dodgy fitment of clutch pedal. had to open all the holes up, including the main one (main one was due to diameter of the clutch master)

clutch master mounting by Flsimages, on Flickr

Clutch master mounting by Flsimages, on Flickr
still have to lop off the extra threads.

other than that, pretty mild day. most of it was spent running around getting some supplies, and unloading the trailer with tons of stuff, so i only did about 5 hours of work total id say. by lunchtime tomorrow the body should be off chassis