Originally Posted by DSGMach1
shh
u cant begin to understand what just happened
shh
u cant begin to understand what just happened
are you sure about what just happened, cuz i dont think anyone is..shh
u cant begin to understand what just happened
78 camaro build 30% motor-4
o im very sure....also i still have Titty Tops
^^ true story.....you also have 666 posts
Its not "V-tec" dummy its vtec
BeFF <beef>
GECKOSQUAD
That just happened.Its not "V-tec" dummy its vtec
LOL.... I was pose to go to work today. But i left my lights on overnight. And that diesel is super hard to start when the glow plugs take so much power. I didn't get it started till 8:30pm. Then I had to run into town. And do some things. I was goin to go into work at 1:00pm But fell asleep and didn't wake up till 3:00pm. But I still got school tonight LOL.
__________________
2006 GMC Sierra 1500
1981 Oldsmobile Cutlass Supreme Brougham Diesel 5.7L Update May 29, 2010
http://www.cardomain.com/ride/2961976/1
2005 Suzuki Katana 600
Jet kit, 5 degree advancer,Yoshimura Slip-on, Vortex Sprockets F 14t(-1down) R 50t(+3up)
Im goin to get rid of the cutlass and the 3rd gen camaro when I get my new truck. I got a new love in a project. Its a Hon--d... LOL not. I goin to buy a late 70s model camaro ( I already have a good lead on one). Like the one Ricky bobby has in his sig. And put a 70's front-end on it and have my dream car on the cheap and want feel bad for sticking a 455 in it. Plus a strong rear-end. And easier to swap an even stronger rear end in it. The rear end is killing me on this 3rd gen camaro( the one I have now). It looks like it is goin to cost 2 grand just to get a rear end to hold the 455. I don't like my 3rd gen no where near that much to spend that kind of money on it.
__________________
2006 GMC Sierra 1500
1981 Oldsmobile Cutlass Supreme Brougham Diesel 5.7L Update May 29, 2010
http://www.cardomain.com/ride/2961976/1
2005 Suzuki Katana 600
Jet kit, 5 degree advancer,Yoshimura Slip-on, Vortex Sprockets F 14t(-1down) R 50t(+3up)
JOSS!!!!!!!!!!!!!!!!!!!!! Whatchu doin in here????*waits for Tony to come running*
My boyfriend is better than you...
NO EXCUSE SGT!!!!!
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Yea you know i luvz my JosJOSS!!!!!!!!!!!!!!!!!!!!! Whatchu doin in here????to deaf
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Well, I didn't want to go to school. But I did. It was first day was only one hour long verus the full 2 hours
__________________
2006 GMC Sierra 1500
1981 Oldsmobile Cutlass Supreme Brougham Diesel 5.7L Update May 29, 2010
http://www.cardomain.com/ride/2961976/1
2005 Suzuki Katana 600
Jet kit, 5 degree advancer,Yoshimura Slip-on, Vortex Sprockets F 14t(-1down) R 50t(+3up)
i just wanted to quote that so people would read it again...I haven't done anything more than putting the exhaust and intake spacer on my Mach 1 because that's all it has and I have to drive it every day because I have this thing called a drivers license. You may have heard of one.....I think you may have had one before you decided to play on the 19-41 slip and slide. I've done plenty of work on my 68 and 96 between restoring interior, upholstery work, and usual bolt ons. Never had to do anything to the motor because my shit actually ran and I actually had to daily drive my cars because once again I have this thing that allows me to drive on public roads. Trust me though I can tell you do your own work. There is a reason my shit stays together and I didn't try drifting in the wachovia parking deck and blow my intake off a couple of times. Oh but as you said that was because you weren't running race gas, right?? LMAO Riiiiiight
I cut a 2.1 because my car is on a stock gear, stock converter, AUTOMATIC and my motor does not get into the power band until almost 4k. It shouldn't be hard for a 5 spd car to out launch a auto with no gear or stall. If you want to see it not spin you are more than welcome to go for a ride and see for yourself what it does. You may not be aware of this coming from the land of uber fast v6 camaros but when its as cold as it was the night I raced the chevelle cars tend to not hook nearly as well. And who says you don't learn something new everyday.
and I even gave you ++ reps for entertaining me at work and making the BRB lounge interesting.
Back to being stock and slow
who going to the V tommorow?
Not meeeeeeeeeee. Im headin out to PC after work tomorrow
nice lucky man
Travis, what motor did you put in your hatch? Just wondering. Love the flame it threw last night. lol
Back to being stock and slow
I wanted to quote you so that the next time you come in here you would see that I quoted you
What's going on Tim, how ya been man?
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
I'll be at the V!!! U suckers better be there!!!
My boyfriend is better than you...
But I just said I wouldnt be sweetheart!....
Just another LS. You talkin bout when Tree drove it?
Been alright I guess man. Just working and trying to get on a work out routine.I wanted to quote you so that the next time you come in here you would see that I quoted you
What's going on Tim, how ya been man?
How you been man?
Back to being stock and slow
Oh ok, that's cool. it sounds good man. Yeah, talking about when Tree drove it.
Back to being stock and slow
Back to being stock and slow
Tired from driving back and forth from work.... Yea I finally got a J-O-B, but that beeaccchhhh is way up in fawk'n Roswell
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
BRB FTW
AKA HIZDAWAY
Yeah, how's the job going? I remember you were starting last month... I have a guy supposed to be buying my bike soon... I might get a newer one at the beginning of the year... Either that or looking for an e36.Tired from driving back and forth from work.... Yea I finally got a J-O-B, but that beeaccchhhh is way up in fawk'n Roswell
Back to being stock and slow
It's cool, I just dread the drivewell either way dude you'll have my support
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
What all you doing on the job? You still doing PDR?It's cool, I just dread the drive
Back to being stock and slow
Detailing and PDR on the side, might try out to be a tech
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Cool deal man.Detailing and PDR on the side, might try out to be a tech
Good luck with it.
Back to being stock and slow
Awwwww male bonding!!!!
My boyfriend is better than you...
What made you change your sig, what you don't like women
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
It is now that you're here...
Wait.... what?
Back to being stock and slow
Losers!!!! STFU!!! And my sig was hot but it was lame.
My boyfriend is better than you...
*shuts the F*** up cause Liz yelled at him*
What an ass... =(
Back to being stock and slow
lol shez jus mad cuaz she ain't gettin some
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
sup guys
Posting Permissions
Reply With Quote
