what size fitting

[boostedb16]

on my oil return line going from my turbo to the oil pan. what size fitting goes in the turbo? i have a turbonetics t3 if that helps.

[drmcivicsi]

i got one laying around i could sell ya if ya want

[boostedb16]

i have a rubber hose on the fitting now, i am ordering a steel braided line and i need to know what size fitting because the line is pre made.

[drmcivicsi]

oh not sure there i run a -10 an line for my oil return but thats also on a much bigger turbo sorry i couldnt help free bump

[boostedb16]

can anyone help?

[SPOOLIN]

you supposed to buy the piece that bolts on, a flange with a pipe thread in it. if you already have the flange on there, the thread is 1/2 NPT

http://cheapturbo.stores.yahoo.net/t3bilaloilre.html

[boostedb16]

thats for the oil pan right, is the other end of the hose the same size

[SPOOLIN]

NO THAT FLANGE IS NOT FOR THE OIL PAN, IT BOLTS TO THE BOTTOM OF THE TURBO AT THE OIL OUTLET, you then screw in the 1/2npt --> -8an or -10an fitting into it. Then you have a -8 or -10 fitting welded to your oil pan. Then you run the appropriate line.

[boostedb16]

OK THANKS