SPOOLIN PROJECT MAYHEM IV

Printable View

Show 100 post(s) from this thread on one page

09-29-2006, 12:37 PM
BTEC

WELL SHIT, CATS OUTTA THE FUKKIN BAG NOW.

I SUSPECT LIKE MOST B-SERIES NUMBER THREE IS DONE. IM TELLING YAWL IT HIT 32PSI THAT RUN. THATS Y I ALWAYS BUMP THE FUEL WAY UP PAST WHERE IM TUNING TO JUST INCASE THE BOOST COMES IN HARD AND SPIKE I DNT GO LEAN. WELL TIMING COULDVE BEEN OFF TOO. HOPEFULLY THE SLEEVES AINT HURT.
09-29-2006, 12:43 PM
Vteckidd

BTEC,

come on man, it DID NOT SPIKE, the recall on the Profec never went over 27.6psi. An injector failed. if you think the "spike" caused the failure , then why did that injector on Number 3 not test out in working condition?

fucker
09-29-2006, 12:47 PM
BTEC

Quote:

Originally Posted by Mr. 2JZKIDD

BTEC,

come on man, it DID NOT SPIKE, the recall on the Profec never went over 27.6psi. An injector failed. if you think the "spike" caused the failure , then why did that injector on Number 3 not test out in working condition?

fucker

WELL SHIT, IT SOUNDED LIKE IT SPIKED FROM WHERE I WAS STANDING (OUTSIDE). I WASNT TRYING TO CATCH NE THING IN CASE IT WANTED TO COME OUT AND PLAY. LOL!!!
09-29-2006, 12:49 PM
SLow_POke

dayyummm that sucks man . to bad it has to be taken apart to fix the issue. hopefully nothing to serious.

-Ernie
09-29-2006, 12:50 PM
iloveboost

Sucks man. Hope it didn't mess with the sleeves.
09-29-2006, 12:51 PM
Vteckidd

im sure ill have pics of the carnage tonight
09-29-2006, 12:51 PM
RiceBoy

Damn.....a moment of silence...
09-29-2006, 12:53 PM
Vteckidd

RIP Project Mayhem
09-29-2006, 12:54 PM
BTEC

Quote:

Originally Posted by Mr. 2JZKIDD

im sure ill have pics of the carnage tonight

HES GONNA HAVE TO OVERNIGHT PARTS FROM JAPAN TO MAKE IT TO THE RACES THIS WEEKEND. F&F MOMENT
09-29-2006, 12:55 PM
Vteckidd

HAHA i think Matt knows that any chance of making any race this season is out. Oh well, you guys all know how it is, this is the game we play.

if your not blowing shit up, you aint making any power.

But it sucks its something as stupid as a used injector. I have seen motors that melted a piston and the sleeves were ok.

i think its a 50/50 chance it needs a piston
09-29-2006, 12:57 PM
B18c1Turboed

Quote:

Originally Posted by iloveboost

Sucks man. Hope it didn't mess with the sleeves.

Well from are expirence the Sleeves are gone.Becasue when u detonate a motor the piston brecks up in pieces and scars the walls up.you might be able to save the block by going 85mm now.I keep telling you about using used parts!!
09-29-2006, 12:57 PM
BTEC

Quote:

Originally Posted by Mr. 2JZKIDD

HAHA i think Matt knows that any chance of making any race this season is out. Oh well, you guys all know how it is, this is the game we play.

if your not blowing shit up, you aint making any power.

But it sucks its something as stupid as a used injector. I have seen motors that melted a piston and the sleeves were ok.

i think its a 50/50 chance it needs a piston

WELL IM TRYING TO HAVE FAITH DAMMIT.

WAIT, MAYBE WE CAN SWAP THE SHIT TO MY CAR WITH 2/3 THE BOOST AND STILL HAVE SOMETHING TO RUN. LOL!!!! YES, THE TRANNY TOO. LOL!!
09-29-2006, 12:59 PM
BTEC

Quote:

Originally Posted by B18c1Turboed

Well from are expirence the Sleeves are gone.Becasue when u detonate a motor the piston brecks up in pieces and scars the walls up.you might be able to save the block by going 85mm now.I keep telling you about using used parts!!

HOPEFULLY IT DIDNT COME APART, JUST COLLAPSED ALL THE RING LANDS OR SOMETHING. BLOCKS TOO EXPENSIVE TO NOT HAVE EVEN MADE IT TO THE TRACK YET.
09-29-2006, 01:00 PM
SPOOLIN

Im pretty shocked as of this point. I've tried to just keep calm after spending 5 months and countless hours working on it and ressurecting the chassis from the dead. Something so STUPID as an injector being lazy is what really kills me. Ill gather myself this evening and start tearing away at it. I hope the head and sleeves are ok. Ive talked to a lot of people today. I really wanted to bring it to Silverdollar this weekend to give her a good test run. Import face-off isnt out of the question but i don't know if i can get it all together properly by then. :(
09-29-2006, 01:02 PM
BTEC

Quote:

Originally Posted by SPOOLIN

Im pretty shocked as of this point. I've tried to just keep calm after spending 5 months and countless hours working on it and ressurecting the chassis from the dead. Something so STUPID as an injector being lazy is what really kills me. Ill gather myself this evening and start tearing away at it. I hope the head and sleeves are ok. Ive talked to a lot of people today. I really wanted to bring it to Silverdollar this weekend to give her a good test run. Import face-off isnt out of the question but i don't know if i can get it all together properly by then.

WELL IF U NEED HELP MAN LET ME KNOW. AND I DNT HAVE ANY PARTS IN MY TOOLBOX TO GET UR CAR RUNNING THIS TIME. :dunno:
09-29-2006, 01:02 PM
SPOOLIN

your box was the king holder of retarded parts no one else would have laying around. Its like a treasure box. Preciate the offer.
09-29-2006, 01:03 PM
SLow_POke

Quote:

Originally Posted by SPOOLIN

Im pretty shocked as of this point. I've tried to just keep calm after spending 5 months and countless hours working on it and ressurecting the chassis from the dead. Something so STUPID as an injector being lazy is what really kills me. Ill gather myself this evening and start tearing away at it. I hope the head and sleeves are ok. Ive talked to a lot of people today. I really wanted to bring it to Silverdollar this weekend to give her a good test run. Import face-off isnt out of the question but i don't know if i can get it all together properly by then. :(

dont rush homie. thres always next time:yes:

-Ernie
09-29-2006, 01:03 PM
BTEC

Quote:

Originally Posted by SPOOLIN

your box was the king holder of retarded parts no one else would have laying around. Its like a treasure box. Preciate the offer.

NO PROBLEM MAN.
09-29-2006, 04:10 PM
Vteckidd

R.I.P

just pulled the head, this is def WAY worse than i though. Apparently he dropped a valve. No idea why or how, when the injector lost signal, it must have detonated an blown the piston or valve apart.

http://i24.photobucket.com/albums/c2...dd/GSRhead.jpg
09-29-2006, 04:15 PM
SLow_POke

Quote:

Originally Posted by Mr. 2JZKIDD

R.I.P

just pulled the head, this is def WAY worse than i though. Apparently he dropped a valve. No idea why or how, when the injector lost signal, it must have detonated an blown the piston or valve apart.

http://i24.photobucket.com/albums/c2...dd/GSRhead.jpg

hows the BLOCK? piston. sleeve?

-Ernie
09-29-2006, 05:21 PM
Vteckidd

Sleeves have some scratches, but the piston is GONE
09-29-2006, 05:22 PM
93H22ACX

:cry: :cry: :cry:
09-29-2006, 07:48 PM
AnclyT

dang, that sucks...

sorry to hear
09-29-2006, 09:22 PM
BLK JDM

So much for Reynolds this weekend and the "Peterkiller!!!"
09-29-2006, 09:32 PM
Vteckidd

i dont think Spoolin ever said anything about "peterkiller"

dont know why it always gets brought to that level, no reason for it
09-29-2006, 10:31 PM
Vuongy_Dong

was there any port work done on this head?
09-30-2006, 09:12 AM
Vteckidd

yes
09-30-2006, 09:38 AM
Black R

Quote:

Originally Posted by BLK JDM

So much for Reynolds this weekend and the "Peterkiller!!!"

way to kick him when he's down.....

stover, just take a minute to relax and then come back stronger and harder. :)
09-30-2006, 09:49 AM
99SI

Damn that's a fucked up combustion chamber. That sucks to hear, I was excited to see it run tomorrow. Good luck with getting it back in shape.
09-30-2006, 12:10 PM
JDMBeau

:*(
10-01-2006, 02:16 PM
NAIZBST

sorry to hear that....things will get better
10-02-2006, 08:05 AM
SPOOLIN

looking at that head makes me wanna vomit. Looks like i wasnt to only honda to blow something up this week or other cars for that matter.
10-02-2006, 08:13 AM
mumbles

damn rome rednecks always breakin shit..
10-02-2006, 08:14 AM
BTEC

Quote:

Originally Posted by mumbles

damn rome rednecks always breakin shit..

:eek: THATS RECIST!!!
10-02-2006, 08:21 AM
Halfwit

Quote:

Originally Posted by BTEC

:eek: THATS RECIST!!!

the "a" is like a whole inch away from the "e"...cmon man
10-02-2006, 08:21 AM
mumbles

Quote:

Originally Posted by BTEC

:eek: THATS RECIST!!!

truth hurts sometimes
10-02-2006, 08:25 AM
BTEC

Quote:

Originally Posted by Halfwit

the "a" is like a whole inch away from the "e"...cmon man

SHET UP U WHINNY BITCH!!! SHIT HAPPENS
10-02-2006, 09:16 AM
Halfwit

Quote:

Originally Posted by BTEC

SHET UP U WHINNY BITCH!!! SHIT HAPPENS

itll be ok......go build my car or somthin plz
10-02-2006, 09:28 AM
BTEC

Quote:

Originally Posted by Halfwit

itll be ok......go build my car or somthin plz

U DNT HAVE ENOUGH CAMS SO I DNT KNOW NUN BOUT IT DUDE. LOL!!!

THE ENGINE IS DONE. IM ON STANDBY ON BUILDING MANIFOLDS DUE TO MOST FIRST, ONLY AND MOST RECENT CASUALTY.
10-02-2006, 09:30 AM
Halfwit

Quote:

Originally Posted by BTEC

U DNT HAVE ENOUGH CAMS SO I DNT KNOW NUN BOUT IT DUDE. LOL!!!

THE ENGINE IS DONE. IM ON STANDBY ON BUILDING MANIFOLDS DUE TO MOST FIRST, ONLY AND MOST RECENT CASUALTY.

damnit, i guess ill doa b16 in my ek so then u can work on it

Show 100 post(s) from this thread on one page