need to get head rebuilt. what are good places??

[sum1udontknow84]

I am going to be taking my engine out in a few days and i want to get the head rebuilt since i will be replacing the piston rings in the block. I have an 01 GSR and wanted to know who does good work in GA I can take my head to. Please include name and number of people that do good work at a reasonable price. Thanks.

[mahdsports]

what all do you want done to the head? do you just want to pressure test, clean and mill the head or do you want to replace the valve stem seals and reseat the valve? if you want to just do the first, the price is only $150. if you want to rework the head with new seals, then the price is $350. the turn around for the first is two days and the turn around for the second is three days. let me know if we can help. remember that we can also do port and polishing with aftermarket valve, spring and retainers. we also offer skunk2 heads as well. anything you may need.

[Vteckidd]

I am going to be taking my engine out in a few days and i want to get the head rebuilt since i will be replacing the piston rings in the block. I have an 01 GSR and wanted to know who does good work in GA I can take my head to. Please include name and number of people that do good work at a reasonable price. Thanks.

depends what you want to do.

Usually, i reccomend valves, valve job, springs an retainers (I only use Skunk2 PRO or Rocket Motorsports) cam seals, valve stem seals.

depends on how many miles is on the head as well. If its got more than 100k on it i would def get new guides installed as they tend to wear out pretty fast.

[sirhatch1030]

automotive persion machinery in forrest park . if we grind the valves and seats , presser test the head , mill the head and clean it . it,s 325 $ lmk.

[BABY J]

DAMON, MIKE & MAD

How much for COMPLETE refresh to INCLUDE P&P (loox like standard rate is 350 for refresh... how much added for P&P as well (b16a). Not going oversize on valves, standard size.

[sum1udontknow84]

automotive persion machinery in forrest park . if we grind the valves and seats , presser test the head , mill the head and clean it . it,s 325 $ lmk.

whats the number there?

[BABY J]

Oh, MIKE, DAMON, and MAD... yall can send me 3 separate PMs on the price. Not tryna start a "who can bid the lowest" war. LOL. I gotta B16 head... need complete refresh and P/P.

678-516-2755

[Vteckidd]

street port starts at $800, includes guides an a valve job. Same port that was done to my 240whp ALL MOTOR lsvtec.

ferrea valves ususaly run about $200, Rocket springs an retainers $250-300 depending on what generation you want. Valve stem seals are $30 from Ferrea.

[BABY J]

^^ I'm not gonna mutt out the head for a street car daily driver --> I'm gonna pick a vendor and stick w/ them since their products will be designed to work together. I was thinking Ferrea or Manley.

[Big Baller]

Nothing wrong with using diffrent vendors, every company has their strong product. The Ferrea stuff is always nice though.

[BABY J]

Troo, my other build is DEF a mutt. But this is for my DD, so I'm gonna keep it all "nice and neat" this time.

[sirhatch1030]

whats the number there?

404-768-8830. ask for david dee or mike.