2jz-gte
rb26-dett
Depends on the use.
2JZGTE>RB
last time I checked, R34 weighs MORE than a supra. supra=3400lbs, R34=3600 lbs. judging from the poll, most people got it RIGHT ;-) besides just sheer asthetics, the 2JZ looks much better than the tilted, budged RB. most importantly the 2JZ has a much stronger stock bottom end and is a bigger motor, FTW.
Wrong. Supras haven't weighed 3400lbs since 1984.Originally Posted by ttman
93 - 98' weigh 3600 - 3800 lbs. And 3600 lbs isnt bad for an AWD car.
As far as the bottom end being stronger, havent seen a 2JZ got to 1800hp on the stock bottom.
The RB26 has been taken to 1800 HP on the stock bottom end. This was already posted in here once near the beginning.
They're both great motors, but if I wanted to be a sheep I woulda went with the 2JZ instead.
2JZ = fast & furious on a budget compared to the RB26.
Didn't know people that build 700-1200hp motors were worried about shipping from Japan. LOLz.
supra = highway/drag whore
skyline = track/drag/drift/show/ list goes on
LOL YES. But I have seen rally Supras. It depends on what I was doing. Drag 2J but for the track RB. IDK Im don’t like drag racing too boring for me so I would pic RB. I gess because the RB would have grater response on the track because of less stroke. This vid is old but lest you see what I mean. http://vids.myspace.com/index.cfm?fu...ideoID=1072922
who the hell would need 1500+ hp in a car? i think 1000 hp is more than enough..
i always love 2jz because they're known to hold 1000 hp with a stock bottom end..
but i'll go with a 3sgte - if you fully built it you can pretty much have 600+ and it's a smaller motor..
Some of these posts in here must have been deleted.
"DON'T FLOOD THE CAR PICS SECTION WITH YOUR BULLSHIT
FORMULA D PICS" SQUAD MEMBER
2JZs are taking over the world....one 240 at a time.
Turbo Dave rules!!!!
Im a Nissan guy and RB owner...and I still chose the 2JZ. Im sorry, but any drive-train that can handle 800-1000 hp on the stock block deserves the nod.
Daily - '03 Infiniti G35c Sport
Power - '03 Mitsubishi Evolution VIII
Beater - '97 GMC Jimmy
It depends on the use but if i had the money to build either for my 240 id go with the rb26...I would think youd get alot more credit then you would with a 2jz since it's alot more rare and a much harder swap.
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
^^ they can do it sideways too! just need a good driverI voted 2jz.
they are both sexy ass motors that put down a sh*t load of power.
The Carbon Fibered R6
but if i had to choose... Dodge Viper V10
The Carbon Fibered R6
you know you say that but lets really think this through.... i remember that 1500hp viper you posted.but if i had to choose... Dodge Viper V10
now that car has an 8 liter right?
the rb fully done up is 3.0 and a 2jz goes to 3.4 liters. Soo i guess what im really saying if chrysler really took their time and didnt use a truck engine, their would be alot more power without the need of turbos and such.
the only other car that has 8 liters is a veyron and that engine is tuned to be driven everyday and not for just track purposes. It drink pump gas to.
If you're suggesting a 3.0L putting out 1500hp is better than an 8L with the same hp, you need to get your facts straight.
IA Rules doesn't allow these images in sigs
- IA Mgmt
Im saying with all perfect volumetric efficiency, the Viper engine should make more power than it currently has. I say it's not a well built engine because why it it have so much displacement yet show so little for it. Forget adding boost and what not.
Imagine if BMW had their 5.0L V10 on a dyno vs the 8.0L mill from Chrysler.
Really which is the better engine?
i would take an I motor over a V. V's dont make the power the Inlines do.
The Carbon Fibered R6
Not hp but non distortional torque
i just find the Viper V10 a beautiful motor. There arent many pretty motors anymore. RB, 2jz, B16/18, Viper, a few others. Most are covered in sh*t or have covers all over them.
The Carbon Fibered R6
this is the worlds best engine i think! BMW V10
I think Bugatti's would be. Quad turbos and 10 radiators. lol, but back to topic: rb26dett. something about the appearance of it..drool.. not saying it's better than the 2jz
sig says it all
2JZFTW
but both are great motors in there own way, it all depends on what there being built for and the driver to get the most out of a Vehicle's setup.
KA24DE ftw...lol
2jz all the way. because it's a toyota. ofcourse i'm more of a toyota fan than a nissan fan so my opinion is biased. not that everyone else's isn't.
:english:
This is the most worn out topic. If the rb26 is the s h i t where are they, what there is maybe a hand full here that do any kind of big hp/tq numbers.(They are a cool swap because there isn't alot of them around) If we were over seas it would be another story. But in the united states 2jz rules a s s in this part of the country. Take AAP/Titan high hp numbers are nothing for them and they do them every day. Show me anyone running a rb26 for even a half a season without problems in our country and doing what the 2jz can do performance wise at the track.
Last edited by turbodave; 02-07-2008 at 11:49 PM.
why swap either be original
Yes, be original. Don't use either proven race motor.
I've owned both, and I would say stock-to-stock, the RB26. I don't have the best data experience, being that my supra was auto and BPU, and my GT-R is slightly modified (Trust FMIC, 4-in Apexi N1 Exhaust, DP, HKS twin intakes). Supra was 400 bhp, skyline is probably 350 bhp. The power/torque curve is more linear and responsive with the skyline, due to the true twin setup of the small Garrett turbines. The Toyota's CT26 turbine's are nice, but the sequential set-up creates a minor lag (especially in an AT), which can be disappointing, 'til the 2nd turbine spools up and then you're off!
The skyline is much more fun to drive and feels less bulky in the zigs, and the supra feels more like a drag car.
What would be interesting, is to, somehow swap a 2jzgte into a GT-R (with AWD), and swap an RB26DETT into a Supra and see how that pans out. Of course, I would have to convert the gte to a true twin set-up for the response, but I bet I would like it more in the GT-R. Just gotta have that response!
i would take a rb30 over a 2jz... 3 litres in the rb is badass
1988 Supra N/A 5spd SLOW
i like the rb better. unless of course you want a dyno queen.
positive reps plz
I've done both, and I like the 2J better. It spooled the turbo faster, made more torque, can rev almost as high, and was less expensive. With that said, the RB is still a great motor, it's just my preference based on what I've dealt with in the past 2yrs.
turbo dave makes a packet thing that actually compare the 2jzgte with the rb25 and 26 if you want to conatct them with mainstream performance, they do some good things with the 2j
Really people who cares... If you've got the money to build the hell outta one or the other then just pick what you want... But PLEASE remember... No matter how much HP you get or how fast it is in the 1/4 ....SOMEONE, SOMEWHERE WILL BEAT YOU IN BOTH.... SO WHY WASTE YOUR MONEY.... just my opinion
then why are you on a car forum?????
statement is true enough, but if you're not into hp then the same could be said about your stereo or look of a car if someone else has more money to invest. just trying to understand the why bother part if you're not into cars why not be on a computer site or something
00 GSR 13.33@114 (355/304), 92 LX 5.0(twin somethings), 02 MTI(TX) ZO7 427 (540/518)sold, bmw 318w/2jz(driftn), 93 Supra TT Hardtop, 04 ford excursion, 55 chevy cruiser
MabletonSpeedShop member
MCE Mafia supporting member
honored to be MCE Dec'08 rotm
http://uk.youtube.com/watch?v=RNQN9i4Be-kvette mtn run
http://www.youtube.com/watch?v=RjgbxbGyN5A poopra 1st 9sec 1/4
D15/16 ftw. Most people that I've talked to with extensive experience (like battleground above) prefer the 2JZ.
R34-GTT-RB26
2jz because toyota made it
6G72tt
wealth is of the mind and not the pockett
6G72TT
wealth is of the mind and not the pockett
20bt?
Try not. Do or Do not.
Posting Permissions
Reply With Quote
