Depending on your experience working on engines, I would suggest getting a repair manual so that you can get a step-by-step article on how to do it. Also, in the future you will have documented assistance. HTH!
Depending on your experience working on engines, I would suggest getting a repair manual so that you can get a step-by-step article on how to do it. Also, in the future you will have documented assistance. HTH!
It's not that hard, just takes some time b/c you have to dig the engine half way out. As suggested, you should change the belts and get a valve cover gasket. Whatever you do, don't let it run hot b/c you'll end up warping your head gasket.
If you don't want to do it yourself, I know a guy who can do it pretty cheap.
Posting Permissions
Reply With Quote