H22a accord vtec problem
Ok so i had a usdm h22a1 in the car before and it spun a rod bearing so i put the jdm h22a in everything works exactly how it should but vtec. it wont come on at all and the car redlines at 6500 for some odd reason since vtec isnt working maybe in some kind of limp mode. if any 1 can help me get vtec working i can throw them some $$$ i live in the buford area pm me on here with and suggestions thanks!!
May be an ecu problem
98 Acura Integra LS-DD
??????????????????-project
is it obd1 or obd2? because obd2 doesnt accept jdm h22s to my knowledge.
CD5 Accord
im in suwanee. are you thorwin any codes?
All that is necessary for evil to succeed is for good men to do nothing."
Two things a man should maintain to the highest degree
credibility and reputation
you need to check the vtec soleniod to see if its getting power, you can send 12v to the vtec soleniod and if it clicks, its still good. also check your old motor to see if it has a crank position sensor behind the timing cover. the jdm motors crank sensor is in the distributor. so you will need to take those parts off the old motor and put them on the new motor, if its behind the timing cover.Originally Posted by 94_cd5
About to approach beast mode
no codes are being thrown and its obd1
ya we checked vtec and it had 12v going to it so idk im gonna check on the old motor its in the garage
any other help out there? wanna get this up and running right
i might be throwing a code not sure idk if my cel light works it doesnt flash when i turn the car on so the bulb might be out
Posting Permissions
Reply With Quote