kms valvetrain

[all-mota]

I have a skunk2 IM already...
Im buying a Kidd header (for sure)
2.5 straight pipe on apex muffler
and IM DEFINATELY going to scotty for a tune... this is what im shooting for and this is what I have (first list) and what I need (second list)

whats ur estimate on WHP?

Have:
S2 PRO IM
pr3 pistons .40mm over
440cc Injectors
arp rod bolts/ head studs
walbro 255 FP
AEM v2 cold air

Need:
valvetrain
cams
cam gears
header
2.5 straight pipe

68 or 70mm throttle body and unless the skunk 2 mani is ported the performer x makes a little more power right out of the box. and as far as a estimate just put it all together and you will find out could be anywhere from 170 to 200 if your lucky

[nelson9995]

68 or 70mm throttle body and unless the skunk 2 mani is ported the performer x makes a little more power right out of the box. and as far as a estimate just put it all together and you will find out could be anywhere from 170 to 200 if your lucky

a little disappointing perhaps... we will see....
thanks for the info!

[all-mota]

a little disappointing perhaps... we will see....
thanks for the info!

i mean it's a estimate you could make over 200whp if you get lucky or you could spend the money and get the head ported etc and make it even easier to make the power

[nelson9995]

i mean it's a estimate you could make over 200whp if you get lucky or you could spend the money and get the head ported etc and make it even easier to make the power

yeah... i was thinking about that.... how much is a port and 3 angle valve job??