you melted through the feed line inside the braided sleeve more than likely. angle isn't too bad as long as the drain is a good diameter and no low spots in it. if you can straighten it out more it won't hurt, but the angle isn't likely the issue.
you melted through the feed line inside the braided sleeve more than likely. angle isn't too bad as long as the drain is a good diameter and no low spots in it. if you can straighten it out more it won't hurt, but the angle isn't likely the issue.
MAINSTREAM PERFORMANCE & DIGITAL BOX TUNING
ECU CHIPPING/SOCKETING/TUNING-HONDATA, CROME, BRE, TURBOEDIT
HONDATA DEALER/TUNER
NISSAN REALTIME-NISTUNE
MITSUBISHI AND SUBARU TUNING AVAILABLE!
Posting Permissions
Reply With Quote