sr20s dynoing over 400

[whatever210]

Anyone in the Atlanta area have an sr20 dynoing 400+? give some build specs?


bringing one out very soon, gauging my dyno expectations.

real close if not almost there. 550cc injectors with g2871r with .64 side on 20lbs. a greddy fmic, greddy cams, full apexi exhaust, tuning safc2 but if i tune with power fc then im sure ill be over 400. i tried to stay under 400 only so my motor will last longer and i wouldnt have to upgrade to head studs and cometic head gasket. um greddy pro b spec 2 boost controller. that helps with a quick spool i think im full boost at 3700 rpms but over all bone stock internals except for the cams.

[Sinfix_15]

real close if not almost there. 550cc injectors with g2871r with .64 side on 20lbs. a greddy fmic, greddy cams, full apexi exhaust, tuning safc2 but if i tune with power fc then im sure ill be over 400. i tried to stay under 400 only so my motor will last longer and i wouldnt have to upgrade to head studs and cometic head gasket. um greddy pro b spec 2 boost controller. that helps with a quick spool i think im full boost at 3700 rpms but over all bone stock internals except for the cams.

im about to bring the 240 out, running the same turbo g2871r .64, hks 264 cams, cp pistons, 740cc injectors, arp head studs, cometic gasket, aem boost controller, ect. expecting 400+ @ 25 psi, will soon find out.

[Tree]

real close if not almost there. 550cc injectors with g2871r with .64 side on 20lbs. a greddy fmic, greddy cams, full apexi exhaust, tuning safc2 but if i tune with power fc then im sure ill be over 400. i tried to stay under 400 only so my motor will last longer and i wouldnt have to upgrade to head studs and cometic head gasket. um greddy pro b spec 2 boost controller. that helps with a quick spool i think im full boost at 3700 rpms but over all bone stock internals except for the cams.

pshh your car 400? HA