Quote Originally Posted by TypeRPersonality
195/55 are pretty expensive tires. I would just opt for 195/60/15's because they are cheaper and you can still get good selection. If your car is extremely lowered, just get the 195/55's then. And I would not fit 205/50 on a 6" wheel.

And yes, 195/55 is the OEM size.
LOLOL! fail.


Quote Originally Posted by D.Choe
I kept thinking the blades were 6.5" for some reason...

yea 205 would be way too wide on a 6", stick w/ 195

good lookin out
The set that's holding the table up under my feet measure 6.5" between the inside of the lips and 7" from edge to edge. I'm going to say they're 6.5".

A 205 is 10mm wider than a 195, that 5mm wider on the inside and 5mm wider on the outside. 5mm is 0.19 inches. It fits fine. 1,000's of people drive on 205's everyday. You could put 215/45's on there if you wanted to.

http://www.tirerack.com/tires/Compar...5&startIndex=0