^^That green bucket of bolts is mine. I would agree that I would loose all contests when it came to looks. But I could care less about looks. It's what's under the hood that counts
^^That green bucket of bolts is mine. I would agree that I would loose all contests when it came to looks. But I could care less about looks. It's what's under the hood that counts
K series 626. That's right. It's got a K in it.
Nah I asked cause I seen your car before, and just didn't think that it was yours. That 626 is clean though all you need is to STOP WRITING ON YOUR SH!T, and to wash it you'll be golden.lolOriginally Posted by blackshine007
^^That green bucket of bolts is mine. I would agree that I would loose all contests when it came to looks. But I could care less about looks. It's what's under the hood that counts
What about the H.I.D.S that are considered DOT approved? Anyone
we had issues?
anyways I think my car looks good, I'm not like omg my car is the ****! because it's not, but when someone calls me a ricer I am just defending myself and my car.
that list is tupid.
WTF, BOV stupid mod? mmm hello, every car comes with a BOV. and after market BOV's wont go PSSSHHH PSHHH if you dont reach certain rpms, and if u let go of the gas slowely.
ANd DIY suspension is stupid?
I would never let anyone but me do my lowering on my car.
I don't think there's an aftermarket HID that is DOT certified for HID lights. But, I can tell you that most of your projector beam headlights are more suited to handling the light pattern of HID's. Just make sure that when you look inside the light that you have a wall looking item on the inside. It will be on the bottom side. When you shine the light on the inside, the beam gets reversed courtesy of the the shape of the lense. The block off plate is what is causing the cut off line when you turn the headlights on and point them at the wall. I think it's safe to say that as long as you have the block off plate within the inside of the light housing, it should be more than adequete(?) for HID's just be sure to adjust the level accordingly because it's gonna be pointing higher with the HID's.
As far as the car goes, I got extremely bored oneday and went crazy with my daughter's concrete chalk. I've since washed it. I want to primer it and paint it satin black and leave at that. I have zero primering skills but I'm pretty certain that if I tried, I'll probably do pretty well.
K series 626. That's right. It's got a K in it.
It's not really how high you rev it, but how much of a load you have on engine. Some cars at a stand still won't spool their turbo's very easy. That's mostly due to tuning. And for the record, not every turbo car came with a BOV or bypass valve, granted they suffered more from compressor surge due to the lack of BOVs. To know what a vehicle without a BOV sounds like, go stand at your MARTA bus stop. When the driver lets off it, you'll hear that god aweful sound that's going on with the turbo..... That's the compressor trying to spin backwards from lack of BOV.
I can pretty much agree with the DIY suspension. Cut or heat springs in my book is a no no, particularly the heated springs. I can tolerate cut springs, just as long as it was cut off a bigger vehicle with a higher spring rate so when you cut it for your hieght, you won't have a bouncy ride.
K series 626. That's right. It's got a K in it.
Compressor surge sounds bad ass
[QUOTE=blackshine007]It's not really how high you rev it, but how much of a load you have on engine. Some cars at a stand still won't spool their turbo's very easy. That's mostly due to tuning. And for the record, not every turbo car came with a BOV or bypass valve, granted they suffered more from compressor surge due to the lack of BOVs. To know what a vehicle without a BOV sounds like, go stand at your MARTA bus stop. When the driver lets off it, you'll hear that god aweful sound that's going on with the turbo..... That's the compressor trying to spin backwards from lack of BOV.
thats funny cus a buses brake system uses air instead of fluid, air moves faster than fluid and has more stopping power than a fluid system. can you guess what charges the air tanks for the brake system? and also when the air presure reaches around 120 psi in the tanks there is a air release valve that lets some air out. sound familiar?
Lol, I didn't even read anything but the first few posts. I guess someone drawing on their car with chalk is cooler than HID's.
Bozzio for president.
Lol, I didn't even read anything but the first few posts. I guess someone drawing on their car with chalk is cooler than HID's.
lol at the "ricey exhaust" vid. deff is a bridgeported fd, wit a 2 step... noob cake...
but the bov is the only thing i got a problem with. Surprised neons werent on there... or bodykits...
Everyone's wrong. These are the worst "mods" for your car.
Last edited by VooDooXII; 09-12-2008 at 12:16 AM.
http://kalecoauto.com/index.php?main...products_id=30
imo i like how the FD sounded. rotary idle =
if you have non progressive springs cutting them wont change the spring rate, so some cars are fine to cut with no ride quality change
Why you gotta break ballz?Lol, I didn't even read anything but the first few posts. I guess someone drawing on their car with chalk is cooler than HID's.
Why couldn't I just be bored at the time? Extremely bored? Huh? Why?
K series 626. That's right. It's got a K in it.
Funny you should post this.
I saw a black maxipad today with HID bulb on a stock Halogen system. The light was going everywhere and barely anything was visible in front of the car.
The best part is, he probably doesnt think this is a problem and likes his "mod".
I dont care how you mod your car - if you blind me, then YES I DO HAVE A PROBLEM WITH THAT.
listen man...not to sound like a complete *******, I could care less about you. And like I said, yesterday I aimed my lights up higher to make sure I blind ppl.
So you'd rather endanger other's safety just because you could care less on the risks of someone running off the road due to them being blinded? So let's say your mother and father was carrying your sister and brother in the family car down the road and you just so happened to to be passing them up and they couldn't concentrate on the road ahead because it was being blinded. Your father tries to aim for the white line because the yellow line isn't in his site line. He barely sees it and goes momentarily flying off the road, catches a flat from the set of broken tree branches and is stranded. The point to my story is this, your stupidity is endangering others lives. That's all I'm trying to get you to see.listen man...not to sound like a complete *******, I could care less about you. And like I said, yesterday I aimed my lights up higher to make sure I blind ppl.
K series 626. That's right. It's got a K in it.
BAN.listen man...not to sound like a complete *******, I could care less about you. And like I said, yesterday I aimed my lights up higher to make sure I blind ppl.
You are such a ****ing ***** I could tell that when I met you though.
You got ****TY game for girls too LMFAO
I agree with the HID's/ I went out and bought 200 buck HID's for my truck b/c they are correct for my halogen housing. I dont glare like an ******* and dont blind everyone coming at me.
-Ant.
The Carbon Fibered R6
If I were to see you driving at night I'd definitely slam into your ass. It would be your fault, and you would get to buy me a new car for being such a ****stain on society.listen man...not to sound like a complete *******, I could care less about you. And like I said, yesterday I aimed my lights up higher to make sure I blind ppl.
ah man... 3/7... guess im a ricer...
wing, blow off valve, and exhaust...
well i did angle my HID's down some. does that make it any better? lol
you would think 3k's arent very bright but damn they light up everything.
my HIDs need to be angled up..just a bit..not much though..i'm not tryna blind..but i'm also trying to see
The faster you shift, the lower 1/4 mile time. I broke my buddy's ebay STS (I had been driving my mustang 5.0 w/stock shifter, so I could slam gears, got in his honda with a ebay STS and broke that bish in half)
As far as the 7 mods (from my experience and my opinion):
7. Truck Nutz- LULZ, dumbest sh*t ever. agree.
6. Fake Chrome- Cheesy. Looks cheap. Real chrome is nice though.
5. BOV- WTF? A blow off valve is an awesome mod to a DSM (one of the cars that has to recirc) as the stock can only hold 11-12psi. If the cars needs to be recirc'ed, then do it, but that doesn't make it stupid or useless.
4. Race Clutch in 200hp DD- I personally like a hard grabbing clutch. One reason I got rid of my 2g GST is because I put a OEM style duralast clutch in it. My GSX has a Spec Stage 3. I <3 it.
3. Cheap exhaust- I've had some cheap exhaust set ups and some nicer set ups. My cheaper set ups sounded better.
2. Wings/spoilers- I think some look very good, some not so much. If you're rocking a mugen wing on your RSX or a ITR on your LS, sweet, sh*t looks ballin.
1. Suspension mods- Ummm, wow. I've had cut springs, ebay coilovers, skunk2 sleeve coilovers, stock springs, skunk2 lowering springs, eibach lowering springs, etc. My cut spring cars rode nice, handling improved drastically. Ebay coilovers were semi bouncy, but not too bad. Skunk2 coilovers were very smooth, but not very stiff. Skunk2 lowering springs were harder than my eibachs, so they handled a bit better, but my car with cut springs felt better.
All in all, 6 and 7 from that list were good. The rest was pretty much stupid.
'92 C2500 6.5 Turbo Diesel | '96 240sx
LOL I didn't really aim my headlights up to spite anyone...I was just j/k
My headlights are aimed at about what they should be but I'm sure they still do glare and blah blah blah damn near everyone has HID's in halogen headlights so everyone can cry about that all they want, no one is going to change it. And btw, cars that come stock with HID's would blind me too, but I have 5% tint
Simon tibbett, I've never met you outside of this forum, and if I did, I would hope you'd talk all the **** you do here to my face...
GO TO YOUR THREAD U FUKIN RICER
OH..AND I DO AGREE..FACTORY HID CARS..PRIMARILY BIMMERS AND MERCEDES BLIND ME ALSO
I really just don't see the point in putting HIDS in your halogen set ups. I mean if your stock headlights don't do it well enough you need to get your eyes checked. HID bulbs=ricer mod.
what if you have projectors but the car comes with halogen from the manufacturer, and you install HIDs, is that still considered rice?
WELL CALL ME A RICER...BUT I CAN SEE BETTER. GOING FROM MY TRUCK W/ H4 BULBS TO MY MAXIMA W/ H4 BULBS THEN SEEING THE CHANGE FROM HALOGEN BULBS TO HIDS...NIGHT AND DAY SON..SRSLY.
CALL ME A RICER IF U WANT, BUT ITS ALL DONE AND I ENJOY THEM...SO KICK ROCKS
btw, buying projector headlights ftl...
**** is so fvkin ugly.
EBAY PROJECTORS FTMFW LOL
even tho a lightweight flywheel+race clutch in a 200whp car isn't that necesary (and a B!TCH for dd) it's a lot more fun to drive imo
- 06 sentra spec v
Ewwww projectors. All I'm saying if you drive a car with lights that aren't properly set up to run HID's, that's a ricer mod imo. People that buy egay HID's and throw them in their 90's honda and spray bright ass light all over the road and blind people piss me off. Do it right is all I'm saying. I know HID's make a difference, but my Silverstar halogens are more than adequate for me and don't make me look like an asshat to everyone on the road.what if you have projectors but the car comes with halogen from the manufacturer, and you install HIDs, is that still considered rice?
RICER!
Joins ricer club
well i got hids in my integra.
well i got hids in my integra.As long as you're not one of these douchenozzles blinding everyone then it's cool.
I had Hid's and i blinded folks... my bad i even blinded myself...
Yessir you did, at the V with Mary you were trying to talk to the girl I was with lol.LOL I didn't really aim my headlights up to spite anyone...I was just j/k
My headlights are aimed at about what they should be but I'm sure they still do glare and blah blah blah damn near everyone has HID's in halogen headlights so everyone can cry about that all they want, no one is going to change it. And btw, cars that come stock with HID's would blind me too, but I have 5% tint
Simon tibbett, I've never met you outside of this forum, and if I did, I would hope you'd talk all the **** you do here to my face...
Posting Permissions
Reply With Quote
