I'm building a turbo setup for my Z6 swaped crx and was wondering if upgrading the injectors needs to be done. Curent injectors are the A6 injectors still using the resistor box. I do have the Z6 injectors if there better.

I'll be running

Z6 stock internals with Port and Polished head and intake mani. 65mm JG thotal body

Turbo is a TD05 internaly wastegated at 7 psi (I will only be running this, I have no plans on running more boost)

I have a P28 chiped with crome pro.

I've heard that 450cc dsm injectors are what most people run but what is involed in running these. I know you have to bord out the injector seals to fit then in the intake mani.


any help would be great thank