Turbo or SC???

[jville95]

Okay guys. I need a little insight here and maybe your input may get me what I need.

I have a 95 Accord with a 92-96 JDM H22A installed.
I'm looking to get a little more hp/tq and im looking into boosting now. I've surfed the web a little and I know that Jackson Racing doesn't manufacture a SC for this motor. They do on the 97+ models and Vortex has a wide selection but I'm waiting for them to respond to my email. Some say turbo is better but im kinda skeptical about going turbo due to the c/r of the h22 motor. Besides, a SC would give me better power over the whole rpm range so thats what im leanin towards. I know a smaller turbo, if that was the way I chose to go, would be better because lag would pretty much be eliminated. I am keepin it a DD even though I have an Integra to drive but also, w/o changing the internals, I'd like to keep th psi low, anywhere from 4-7 at the max because Im not trying to blow the motor by any means!! I would like to get 220-260 whp before its all said and done but what do you guys think???

[osiriskidd]

[brandenj]

maybe a good title would have been jdm h22a boost. Turbo or sc? has been overused. you know my advice...if no s/c is made for it go w/ a small turbo w/ low boost

[jville95]

well thats whati may be end up doing. what is teh average life span of a low-boost turbo?
I've heard 60-70k. I've heard the life of the car.

[brandenj]

check this... http://www.d-series.org/forums//showthread.php?t=55997

[Brown Man]

turbo ftw

[jaystar]

turbo u would get way more power. but what is the power range u looking 2 hit ?

[jville95]

but what is the power range u looking 2 hit ?

Well i've been doing my research and to be realistic, with the H22A, I'm looking to get 260 - 280whp. I'm prolly gonna run around 5-6psi on a low-boost setup just because i've heard that motor doens't hold boost well.

[blackshine007]

I think you wanting to go with a small turbo would be a good idea. With a small turbo, it will spool damn near off idle and may peak out around 5k. Vtec will make up for the rest of the power and as a result you will gain more top end power due to positive pressure. Basicly, you'll have a honda with torque to match.

[jville95]

yeah. thats what im pretty much looking for. just some power to get in some butts off the line.

[helcat17]

i would say go with a small turbo however im not positive about that particular motor but i wana say that your hp goal is a lil high for stock internals agin im not positive though i know more about b series than h

[R32Dragon]

Im no honda boost expert. But one thing I know is a designer SC kit from JR or Vortex will set you back a few G's easy. Scrape together a ghetto turbo kit like every other Honda guy seems to do on the cheap.

[BlkCD5]

^ exactly, consider looking into a T25 turbo for your setup. It's small, can be found for cheap and is ideal for low boost(turbo maxes out @ 14psi). Beware though, you might end up craving for more power with boost.

[jville95]

Beware though, you might end up craving for more power with boost.

Well my mechanic told me the problem with turbo's is that they're "addictive." Hell, when I went from a stock accord motor to the H22, I could tell a difference just ridin in 4th gear so I can prolly see how!

[jville95]

Im no honda boost expert. But one thing I know is a designer SC kit from JR or Vortex will set you back a few G's easy. Scrape together a ghetto turbo kit like every other Honda guy seems to do on the cheap.

yeah, I believe turbo will be th option because i called JR and Vortech SC and neither one of them manufactures a SC kit for this motor.

Turbo it is!!!

[Axix23]

go turbo and call it a day... even with the 97+ h22a, your accord's hood won't clear with the jrsc on..

[jville95]

go turbo and call it a day... even with the 97+ h22a, your accord's hood won't clear with the jrsc on..

I figured that too. is that true for the 92-96 JDM H22A's as well?

[BlkCD5]

yes, its just how the accord was designed. Also i heard it was a firewall issue clearance as well.

[.blank cd]

There is very much a firewall clearence w/ the superchargers. If it was me, i would go NA on that H22 cause ur gonna want more boost and your investment might go out the window.

[jville95]

If it was me, i would go NA on that H22 cause ur gonna want more boost and your investment might go out the window.

So what would you recommend as far as N/A goes? Better internals?

[jaystar]

get a turbo kit get pistons and rods and block guard. And boost 10 psi u would be happy

[B_Hoov]

if you want to run SC i have a buddy that owns fat cat fabrication and he does alot of work on le'mans and rolex cars so i assure you his quality is second to none, anyways, he has like an 03 tiburon i think, and had a Mercedes supercharger just sitting on his bench, well in a few hours he had an intake manifold made to incorporate that supercharger on his tiburon! im certain he could make one for an H!

[jville95]

get a turbo kit get pistons and rods and block guard. And boost 10 psi u would be happy

I know a closed deck motor holds up alot better vs an open deck when it comes to boost but even with upgraded internals, will the block still hold the high compression of a turbo? That is my only concern is that I'm not trying to over-do it in any way. Just something reliable and quick off the line.

[jville95]

if you want to run SC i have a buddy that owns fat cat fabrication and he does alot of work on le'mans and rolex cars so i assure you his quality is second to none, anyways, he has like an 03 tiburon i think, and had a Mercedes supercharger just sitting on his bench, well in a few hours he had an intake manifold made to incorporate that supercharger on his tiburon! im certain he could make one for an H!

Well if you could, pm me his number, address or website if he has one so I can check him out. That may not be a bad idea.

[B_Hoov]

im going to go see him Monday, i will get an official website and business phone number as im not sure he would want me giving out his celly. i will pm you when i get the info

[B_Hoov]

http://www.fatcatfabrication.com/

[jaystar]

I know a closed deck motor holds up alot better vs an open deck when it comes to boost but even with upgraded internals, will the block still hold the high compression of a turbo? That is my only concern is that I'm not trying to over-do it in any way. Just something reliable and quick off the line.

For what the h/p u looking 2 get and boost 10 psi pistons and rods a good tune u should be safe. Plus a clutch upgrade and good tune

[jville95]

i will pm you when i get the info

Cool. Thanks.

[jville95]

For what the h/p u looking 2 get and boost 10 psi pistons and rods a good tune u should be safe. Plus a clutch upgrade and good tune

I already have an Exedy stg 2 clutch kit and i'm prolly gonna order an Exedy flywheel from Passwordjdm.com. Good tune, and pistons and rods , depends on my money but it may be worth it. Now when all that is said and done, how long do you think it'll hold? (mind you, its not gonna be driven but maybe 2-3 times per week if that.)

[jaystar]

good tune and as long as u dont go pushing it like a made man every where u go. it can hold 4 a very long time.

[B_Hoov]

he said use the phone number off the website to get ahold of him monday

[jville95]

good tune and as long as u dont go pushing it like a made man every where u go. it can hold 4 a very long time.

lol. I can understand that.

[Terror]

turbocharga!

[SPEEDKID]

supercharga!

[soul]

turbo, cheaper and just as reliable and more power

[B_Hoov]

dude if your going sc h22 on an accord bring that intake mani to me and i guarantee i can make it clear that hood, little shaving here, little welding there...no sweat! you wont even have to run hood spacers!

[WhiteAccord]

Maybe you should have just kept the F series motor and boosting that instead, you could have saved more money, have more boost and probaably have the same results.
And you wont get 260-280 Your more looking at 250 maybe on a good tune, @7psi.

[jville95]

Maybe you should have just kept the F series motor and boosting that instead, you could have saved more money, have more boost and probaably have the same results.
And you wont get 260-280 Your more looking at 250 maybe on a good tune, @7psi.

Well I can deal with 240-250 realistically on 7 psi with a good tune. Im not trying to get crazy or anything but that is would be good for me. Thanks for the info.

[jville95]

dude if your going sc h22 on an accord bring that intake mani to me and i guarantee i can make it clear that hood, little shaving here, little welding there...no sweat! you wont even have to run hood spacers!

Well really the only SC i wanted was from JR but they dont do anything for the 92-96 H22's and neither does Vortech. So now turbo will be the choice of the boost process!!

[stu93gsx]

I like the idea of a t-25 but if you are going to do a complete turbo install you should look into a t-28. Get a dsm flange for the manifold or just buy a complete manifold, then get bigger injectors, buy a side mount intercooler, or just an ebay front mount if you are only going for arounf 250 and you will be able to piece this together for around 800 bucks.