I am in the process of building a ls/vtec and I am wondering which cams do most people like.I heard skunk2's arent bad.Just wondering if you guys could help me out.
Which Vtec Cams?
I am in the process of building a ls/vtec and I am wondering which cams do most people like.I heard skunk2's arent bad.Just wondering if you guys could help me out.
Originally Posted by TheChosenOne
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
Camshafts are recommended based on your setup.
So just saying LSVTEC doesnt mean much.
What Pistons
What Rods
WHat Intake Manifold
What Compression
Do you have valvetrain
What is the car being used for
Most Stock blocks i like SKunk2 Stage 1s or Skunk2 PRO1s if you want to do valvetrain.
For most of the setups on here, Pro1s are plenty big enough
So just saying LSVTEC doesnt mean much.
What Pistons: b16
What Rods: shot peend ls rods or i beams
WHat Intake Manifold: skunk2 or abs
What Compression:dont know
Do you have valvetrain
What is the car being used for: daily driver but i dont drive that often so rough idle doesnt scare me
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
sorry bout that
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
Skunk2 Pro1.Also get the skunk2 intake mani with the skunk2 66mm throttle body.
Boost under slow construction...
a nice stg 2 cam like skunk2 stg2 jun 3's m22x's blox b's or something around that size should perform fine in your build.
if you have someone to degree the cams the pro 1's will also work but will perform better with a highend header a ported head and nice intake manifold combo. if your not planning on doing most of that the pro 1's aren't going to make much more power than the rest of the before mentioned cams they need lots of air to make power
I plan on getting the head ported and polished and use JG Edelbrock headers
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
get mike's header from batlground!!
my headers will make more power. PM me if you want one
how much because im getting JG edelbrocks for 150
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
more than that.
but cheap people have slow cars.
qft
2011 Camero - Fast
1998 T/A - Slow
Batlground FTW
You know better; next time will be a ban.
^^ x2
Im doing a B20/vtec swap and i am using toda-spec b cams, if you go to exospeed.com they will have complete packages for your desired set-up
thats true but i aint rich either and i havent seen many people with their headers.Maybe because abunch of ppl are cheap and have slow cars
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
don't waste your time, dc sports, jg, all that is crap!
listen to mike and get the headers he's selling. Do it right the first time and you won't be disappointed. I can literally guarantee that those jg won't make **** on the dyno. You're just buying them because they're OOOHHHH JG.
1999 Honda Civic EX - SOLD
Ive sold prob 20-25 locally.
If you are asking about buying Cams, you better have a good header, if you cant justify a header that makes power, then you shouldnt buy camshafts.
Heres a few of the cars we have tuned with our header:
and many more. JBhondatech on here picked up 15whp on his b16 over his DC Sport JDM4-1 header.
So, yes, these headers will DESTROY the edelbrock, its been proven. Instead of buying $300-500 cams and a $150 header, id reccomend buying one of our headers and ITR cams.
youll make more power.
but what do i know, i only built the highest whp lsvtec in ga
well my car is far from being slow
lol if you think thats high you should buy a smsp b20vtec header like i did.
their $1250.00 all day long
Oh come on, your ITBs cost more than that
lol hell yeah.Oh come on, your ITBs cost more than that
hell i should just sell them and pick up some ebay stuff i hear it makes great power. probably make 20 more to the wheels haha
OBX>JENVEY
toda killa cams...
I♥my ruckus
You're the trashiest thing this side of the Mississippi.
Ghetto Fab: For kids on a fucking budget
~Lagg Squad~
<turbo negros>
I put the sexy in dyslexia.
R.I.P steven bond....
hahaha giving the finger. corey what do mean about the camshaft? I already gave u a list. I should have listed the camshaft for you. We'll talk about it later and we will work out someting out.
I kno but gotta get some feedback and do my research
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
go to honda tech or just google it.
everybody just gave you feedback you didn't listen
I listen thanks for the info
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
no problem it just seemed like you were ok i'll just go to honda-tech and ask them.
lol gotta get feedback from everyone tho
1. It gets really old when people keep calling southside a thief, b/c honestly, they have no phucking idea! lol
You spoke of Hater tech.... Here is Hytech replica. I have heard good things about it. http://www.hondamarketplace.com/zerothread?id=2206007
ive seen it in the works. ****ing nasty and also a long time ago lol. bin a min mike get a nother hatch!
but what do i know, i only built the highest whp lsvtec in ga
Posting Permissions
Reply With Quote
