need some intercooler piping made. 3"

[patrick4588]

alright i want to have some intercooler piping made. 2.5" hot side and 3" cold side. i want the hot side to go thru the hole by the fender in the engine bay. aluminum or steel is fine, doesnt make a big difference to me. i got the bov flange i need welded on in steel and aluminum. if you are a shop and can do it, let me know. this for a dc2.

[JDM TYTE YO]

I know a shop in monroe area but thats way too far from warner robins

[helcat17]

i think ccr dose some of that in macon

[miro_gt]

is that for a GSR? .. cause 3" would be kinda overkill

[turborodarry]

i know someone who i trhink might do it they are about to do mine for my front mount

[patrick4588]

is that for a GSR? .. cause 3" would be kinda overkill

you dont know what you are talking about

[xdavidscenex]

will do you still have your 2.5" piping?

[helcat17]

you dont know what you are talking about

lol

[patrick4588]

will do you still have your 2.5" piping?

sold it already. sorry

[Jaimecbr900]

Mahdavi can do it. Call them @ 404-925-1558.

[eraser4g63]

Mainstream...

[boostedy8]

you dont know what you are talking about

Unless your running a built motor and a huge turbo, why do you need 3" IC piping? The bigger the pipe you have w/ a small turbo, the longer it takes to spool up. I think 2.5 or 2.75" would be just fine for up to 450 hp. I have installed many turbo kits on the 350Z and the cold side of that setup was around 80mm which is a little over 3" and it worked good on a 3.5L but I think it would be a little much on a GSR. IMO What size turbo are you running?

[patrick4588]

so anyway... i have a fully built motor and im shooting for 700+whp on a borg warner s366. i need 3" piping, 2.5 will be a restriction. i just sold my 2.5" kit.

[Jaimecbr900]

so anyway... i have a fully built motor and im shooting for 700+whp on a borg warner s366. i need 3" piping, 2.5 will be a restriction. i just sold my 2.5" kit.

Not many people run Borg Warner turbos. That's cool. One of the race cars at the shop does. It's a big mack daddy one too.

Like I said, Mahdavi can do it no prob. 770-923-1550. Tell em I sent ya.

[xdavidscenex]

so anyway... i have a fully built motor and im shooting for 700+whp on a borg warner s366. i need 3" piping, 2.5 will be a restriction. i just sold my 2.5" kit.

better get it tuned asap unlike your current motor...

[patrick4588]

when its running again i will

[green91]

I pie cut some 3" od pvc pipe and used gorilla glue. works really good. painted it black even looks like metel

[Berta]

I pie cut some 3" od pvc pipe and used gorilla glue. works really good. painted it black even looks like metel

I think you ought to post some pics of that.

[MIKE.P]

is conyers to far away?? if not give us a call..404-862-0964
here is a pics of a sti we did

[green91]

I think you ought to post some pics of that.

i need to it holds 32 psi from my t4/t5

[helcat17]

i need to it holds 32 psi from my t4/t5

hahahaha

[Berta]

i need to it holds 32 psi from my t4/t5

enlighten us mang!

[green91]

Im kidding.

[Berta]

I was hopeing. haha But if someone did, i really wanted to see! hahaha

[B18c1Turboed]

Buy the piping on ebay, for 120 shipped and cut them up yourself and weld them up!! thats what we do!!

[delslo]

did you get that welded up yet cuz i can hook it up for ya....... just pm me with some details........ i didnt want to read all that lol

[-S Double C-]

so anyway... i have a fully built motor and im shooting for 700+whp on a borg warner s366. i need 3" piping, 2.5 will be a restriction. i just sold my 2.5" kit.

OWNED!!!! LOL!

[B_Hoov]

cxracing.com

[green91]

http://store.racing-solutions.org/

[patrick4588]

i ordered some and i got it today actually. 2.5 hotside and 2.75 cold.

[thang nguyen]

I was wondering this as well. Mostly an estimate on price. Sr20....but with intentions on an 62-1 and greddy intake manifold....therefore all new piping is needed. Anyone with an idea of how much that would run me?

[-S Double C-]

i ordered some and i got it today actually. 2.5 hotside and 2.75 cold.

how much hoe?

[patrick4588]

i had mine routed down thru the fender instead of the normal. synapse bov flange and i also got new 4 ply couplers, one being a transition coupler for going onto the intercooler and all new t bolts. it was 351 shipped. without the couplers and clamps i imagine it would have been about 250. the piping is aluminum with bead rolled edges and i had 2 vacuum ports put in.

[TheShortBus]

i need to have some new pipes made as well, so im thinking about getting some aluminum conduit pipe and renting a bender. my bends arnt really that drastic so it shouldnt kink the pipe any, but just seemed like a good cheap way to go about it.

[d16_turbo]

Buy the piping on ebay, for 120 shipped and cut them up yourself and weld them up!! thats what we do!!

yup thats the easiest way. same thing i do

[d16_turbo]

but just seemed like a good cheap way to go about it.

[TheShortBus]

ha yeah your right.. i just called around and to rent a bender that can bend 2" + pipe its $130 a day.... :/

now now im thinking about finding some pipes on ebay like stated before, but i asked my local exaust shop if they had or knew anyone who could weld aluminum, and they didnt.. so ill just have to call around

[-S Double C-]

i had mine routed down thru the fender instead of the normal. synapse bov flange and i also got new 4 ply couplers, one being a transition coupler for going onto the intercooler and all new t bolts. it was 351 shipped. without the couplers and clamps i imagine it would have been about 250. the piping is aluminum with bead rolled edges and i had 2 vacuum ports put in.

pm me and let me know what kinda power your gonna shoot for with that t3 60-1 FOOL! You never told me