What's your next mod?

[99SeanWs6]

prolly get a LS6 intake, ported TB, and bigger cam next. I want a 9" rear end but that will have to wait

[s four t5]

The throttle body and intake manifold boast a 5-10% ish increase in HP. The RIPP headers that have been dynod on a stock Tib with just a CAI (already got that) gave the Tib 32.6 whp increase and 25.9 lb/ft of torque increase. Then the exaughst is ur standard 10-15 Hp gain, i think, dont quote me on it. Thats the next step, there is more to come under the hood later... Going all NA though

i had all that on my 03. i was able to pull a 15.1 with AEM CAI alone and was finally able to get to a 14.05 with NGM's stage 2 manifold, OBX exhaust, key performance headers.

[malfeas99]

Ion performance springs and whiteline front and rear swaybars.

[SilviaK93]

Tony: I had a JUN flywheel and ACT clutch in my Nissan. The ACT was a 6-puck unsprung and it was a pain in the a$$ to get around with mainly on hills, and if cars got to close behind me. The thing revved awesome though. I later went to a Fidanza flywheel and JWT clutch. This was much easier to get around town.

I think as long as you get a strong SPRUNG clutch you will be good to go.

I will be upgrading to a Fidanza flywheel and slightly stronger than stock clutch when it is time in the Z. The car revs pretty quick now, but the flywheel just makes a world of difference.

[JITB]

i have a lighter flywheel, and it does rev a hell of alot quicker. And i feel like a retard driving it b/c im so used to the regualr flywheel. just have to get used to revving it alot higher so it wont stall. but its efinately worth it, especially fidanza i hear nothin but good things abou there flywheels.

[SLOWR/T]

new motor, big single, new injectors and standalone

[SaturnSLR34on20s]

To pull the engine out of my car, tear it down and rebuild it

[Repost Squintz]

my new mod a new car hopefully

[DR.DOOM]

NEXT MOD: "DOOMS DAY IS COMING"!

[ahmonrah]

^^^ fuckin lame ...

[T.S.]

a new car....

[trythefly]

a new battery for my riding lawnmower

[Anythingep3]

for right now since im broke Hondata

[HalfBaked]

Shit, now I need to get myself a new clutch and get my fucking boost controller working again...

[Allshow97]

Headers and Polished Valve Cover.

[ash7]

I dunno about you guys, but I think a nice set of steelies would be GANGSTER.

(and some red underglow lights, (so i can be like Vin Diesel)

[Twinturbo6]

upgrading my garrett t25 to a t28 on the front bank, powder coating my Valve covers, rebuild ( lower compression, h rods, j spec cams, czt valve springs, retainers, locks, and new engine seals, copper head gasket ) new boost controller, and hopefully an apexi BOV.... nothing particularly special.
Also I'm hoping to get a body kit and paint.... eventually

[Wedge]

no paticular order:
nismo 2way
gt2871r .86 a/r
650cc sidefeed inj.
z32 maf
enthalpy tune

...i need money

[Silver RSX-S]

3" exhaust

then upgraded fuel system to run more boost

[Jordan_W]

Performance: 2.5" HKS Hipower Catback

Exterior: 18X7.5 MSR 103's in gunmetal...

[DerrickT]

performance: Turbo.

exterior: wheels or mugen lip

[1439/2000]

red brides and green takatas.


and the other dsm steering wheels. i have a gsx,tsi, and know all i need to complete my collection is a laser wheel. I really love the fact my galant would have the plymouth emblem on the steering wheel and it bolts up. I'm going to pull a part now.

[AirMax95]

as soon as my car gets back from the shop.....

RMF Header
75 shot
More tuning
Interior swap

[MrEG62U]

turbo and for the exterior a carbin fuber lip and duckbill

nice avatar silviak93

[GTScoob]

Nice alarm and then Ecutek