Not dumber than the E46 owner that used a sock instead of an oil cap. Do a search on google.
Not dumber than the E46 owner that used a sock instead of an oil cap. Do a search on google.
New car:
95 S14 with RB25DET (stock boost)
Old car:
Turbo S2000 400hp/285tq on 9:1 comp & 11psi
http://forum.e46fanatics.com/showthread.php?t=311931 < had to check it outOriginally Posted by afwfjustin
![]()
![]()
REPS!
I ****ed up bad. camshaft-oil problem
if all you are going to do is flame me, just leave the thread and thats that. I ****ed up badly the other night. The oil light came on, i got oil, put it in and accidently dropped the oil cap down below the engine. heres where i ****ed up- i temporarily plugged the uncapped oil hole with a sock and the sock got sucked into it after about 5 mins of driving. its wrapped around the cam shaft-im pretty sure thats what it is... and i need some advice on how to get it out without shelling a ****load of money out to bmw to take it in there. should i unbolt the top piece there and cut it out and then flush the whole thing with some stuff at kragen or just try to cut it out piece by piece through the hole with a sharp razor and take the pieces out with needle nose pliers and then flush it?
please any advice or help on this crap move i made would really really really help me out.
thanks to anyone who replies
Dude saw it and passed it on to 4 sites!>>> Sorry, I had to!
http://www.teckademicseast.com/forum...ad.php?t=13715
http://www.bnzsport.com/forums/index...howtopic=16475
http://ccmw.cc/forum/viewtopic.php?t=1565&highlight=
http://forums.mbworld.org/forums/sho...d.php?t=127336