help!! hks ssq not blowin off!!!!!!

[97WhYt_TeG]

Hey guys i have a non adjustable hks ssq. i mean it's blowin off just a little like compressor surge. i took it off to check to see if the o ring was bad but it was still good. i checked vacuum lines and they are ok... i'm holdin boost but it's just not blowin off. when i took it off i took apart the bov and everything looks good...help idk what the hell is wrong!!!!

[patrick4588]

buy a synapse synchronic bov. piston actuated, no diaphragms. also is a pull type.

[Retro]

buy a synapse synchronic bov. piston actuated, no diaphragms. also is a pull type.

do it one better and get a Tial 50mm...best BOV every made. /thread

[patrick4588]

definitely not. the synapse bov is pressure tested to 100psi to not leak and has absolutely no compressor surge, even at low boost. a ton of people have problems with the tial not blowing off at lower boost levels.

[GT-S Boy]

it blew off fine when you shifted after turning onto dogwood road yesterday lol (i was walking on the sidewalk)

[Retro]

definitely not. the synapse bov is pressure tested to 100psi to not leak and has absolutely no compressor surge, even at low boost. a ton of people have problems with the tial not blowing off at lower boost levels.

ive had 4 tial bov's and i know about 10 other people using them and never had one problem...they blow off fine even at low boost. 100psi is fine and dandy but who is the last person you saw running 100psi? tials are rated at 50psi which is plenty for any car. if not then run two of them, which has been done many times before.

[2.0 under pressure]

buy a synapse synchronic bov. piston actuated, no diaphragms. also is a pull type.

He's right