Need help on swap!

[GSRteg®]

Ok im taking out the old and bringing the new... To start I have a 93 civic cx hatch and im going to put in a 99 civic EX SOHC VTEC engine in there. NOW what would I need to do to make this car run right... what to I need as far as wiring and such. Any help would be great.
__________________

[KPowerEP3]

OBD2 ECU, an OBD1 to OBD2 jumper harness for your ECU, rewire your distributor plug, wire up knock sensors, I think the SOHCs had the 4-wire O2 sensors, as well, so you need to change over to that....ummm...that's all I can think of off the top of my head, but I'm sure there's more.

[Nang]

or you can use a

p28 and skip knock because a p28 doesnt have it
your harness and add vtec pressure switch and the solenoid
convert to 4wire
unpin and repin your old dizzy with the new one. obd1 has 2 plugs while obd2 is one, same colors either way

[GSRteg®]

or you can use a

p28 and skip knock because a p28 doesnt have it
your harness and add vtec pressure switch and the solenoid
convert to 4wire
unpin and repin your old dizzy with the new one. obd1 has 2 plugs while obd2 is one, same colors either way

Thanks....

[LSTurboHatch]

simple swap. NANG pretty much hit it on the head.