Running untuned turbo..

[1NonlyAccord]

So i got my f23a boosted. Running OBD2 swapped wireharness to OBD1. Im not spending 3000$ on the AEM ecu or ect..
what should i do and whats a good product to use to get it properly tuned and run right. and not take out any more money from my pocket?

and for other info.parts list:
T04E Turbo .57compressor wheel trim, .50A/R compressor,. .63A/R turbine
STR Cast iron manifold
Tial .38mm external wastegate .5 bar
Greddy type-RS BOV
custom 2.25" B series downpipe fited to my F series (stainless steel)
FMIC 28x7x2.5
3" intercooler pipeing
ebay t3/t4 oil kit
DSM blue top 450cc injectors
Resistor box
GM 3bar Map sensor w/ piggyback
walbro 255 fuel pump
Golden Eagle Vacuum manifold
OBD2-OBD1 wire harness
ebay 3 A pillar gauges (boost,oil,air/fuel) + Volt gauge

[EmminoDaGreat]

convert to obd1, bring it to us and we can tune it for you.

[1NonlyAccord]

thats pretty much all iv done for now is buy the OBD2 to OBD1 wireharness. was that a mistake or a step in the right direction?

[EmminoDaGreat]

now you need an ecu (which we can get you) chipped, and tuned and you will be safe. If you dont tune it there is a definate chance you wont have time to enjoy it.

[1NonlyAccord]

ok sounds good. luckly the cars just sitting right now getting ready for paint.

[K24cb7coupe]

get a p28, take it mainstream and have scotty chip it with crome and tune it. the ecu will run about $100 and i think they charge $80 for the chip and to put in the ecu. not sure what tuning is per hour.

[EmminoDaGreat]

180 for chipped p28, 140/hr for tuning.

[Da_unknown]

then u will be set...

[K24cb7coupe]

there ya go, here save one for me i will need it in the next month or so!!!

[1NonlyAccord]

how long does it take to tune? 140hr..better take an hr..haha

[scttydb411]

or if you already have a p28 i'll socket/chip that one for $80.

non-vtec turbo appx 2hr
vtec turbo apprx 3hr

it could take less depending on setup, issues, etc.

[1NonlyAccord]

the stock 99 accord 5spd ecu is..i thought it was a p28
and yea SOHC Vtec F23A

[scttydb411]

nope. i've got socketed/chipped p28 for you. you need to use a civic/integra obd1 ecu to socket/chip. once that's done any map/parameters can be loaded then.

[1NonlyAccord]

oh i thought i read sumwhere the accord has a p28 o well.
but ill prolly be up there mid year. saving 3k+ for my paintjob right now.

[JKOBD]

Don't push your luck on an un-tuned setup or you will be pushing that 3k+ painted tin can.

For 3k+ I would expect the car to tune itself and drive itself, and mac females, and....

[1NonlyAccord]

The car is sitting for now.
but yea i kno.they estimated it 3k for 4year warrenty.there going from silver to midnight blue and a few body fixes from my bodywork done from my carport

[SPOOLIN]

3k is to god damn much for any paint job, especially a midnight blue paint job, you need to go get more estimates.

[IDriveToast]

It's not too much when they have to fix what he already tried to fix. It's like doing double work. It could also be a multi-stage paint and he could have asked for multiple layers of clear coat.