Quote Originally Posted by sleepys4
Its not a bad setup, i would have flipped the other way, it gives you a little more power if everything is stock. For boost it should be fine if you change the pistons and rods. Just my 2 cents hope it helps.
This statement isnt exactly true. By changing a from the b16 head to a gsr head on the b16 you are raising the compression, the combustion chambers are smaller on the gsr head. As far as flow goes, stock for stock they are basically the same. It would be better for boost to put put the b16 head on the gsr motor, but really not worth it. People use either head for an ls/vtec. There is no one over the other, its basically what you can get, or your preference. A lot of people get the b16 heads b/c they are a little easier to get than a gsr and are cheaper.