Crx B16A swap

[JDM crx]

I have a '91 Crx and i have a B16A Obd2 what do i have to do to make it run on my crx. i was told that i needed to put and obd0 distributor and alternator. Also i have a semi built head the only thing missing are cams and cam gears and i want to put ctr pistons will the compression be more then 12.5

[§treet_§peed]

bump

[BTEC]

ODB0 DIZZY AND ECU. SINGLE WIRE O2 SENSOR. 91 CIVIC AND CRX SI ENGINES HARNESS. ULL NEED OLDER INJECTORS BC THE PLUGS ARE DIFFERENT AS WELL I THINK. HOPEFULLY U HAVE A CABLE TRANNY OR ULL HAVE TO GET A CABLE TO HYDRO CONVERSION KIT FROM HASPORT. I THINK THATS IT. IF I THINK OF SOMETHING ELSE ILL POST. IF SOMEBODY SEES SOMETHING I POSTED WRONG LET ME KNOW.

[Vteckidd]

Like Btec said:

OBD0 Distributor or a Conversion harness
OBD0 ECU (PWO or PR3)
OBD0 Injectors
OBD0 ENGINE HARNESS- If your car is a DX, then you need to convert to MPFI
If you have a hydro tranny youll need the hasport cable to hydro mount kit, or a cable B series tranny

[JDM crx]

i plugged an obd2 injector to my wiring harness and it fit perfectly. my crx is Si. the obd0 ecu that i have is a pm5

[Vteckidd]

doesnt matter if it plugs in, they use a resistor box on OBD0, obd2 DOES NOT

[BTEC]

i plugged an obd2 injector to my wiring harness and it fit perfectly. my crx is Si. the obd0 ecu that i have is a pm5
WELL OBD0 INJECTORS ARE PEAK AND HOLD AND OBD2 INJECTORS ARE SATURATED SO THEY STILL WNT WRK.

[JDM crx]

o aight thanx. does a pm5 ecu work with my swap