Black R
10-19-2006, 07:17 PM
It's pretty much a bolt-on affair, so I'll let the pictures do the talking:
Start by removing the one bolt from each rear lower control arm (I'm using itr rear lca's, so your setup may be a little different...)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3NjZzNDEzZGZkMzF5NTQx.jpg
There are five bolts holding two brackets on per side - one is the side rear tow hook, and the other is the bracket which holds the swaybar.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3NzZzNDEzZGZkMzF5NTQx.jpg
Comparing stock (above) vs ST (below):
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3ODZzNDEzZGZkMzF5NTQx.jpg
Stock is 1/2" in diameter:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3OTZzNDEzZGZkMzF5NTQx.jpg
ST is 7/8" in diameter:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MDZzNDEzZGZkMzF5NTQx.jpg
The ST brackets bolt on using only three bolts. It's up to you whether to reuse the oem bolts or the ST ones... I used the longer ones:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MTZzNDEzZGZkMzF5NTQx.jpg
There's a weird plate to line up the endlinks and bolt to the rear lca's. I'm pretty disappointed in the design, but whatever works:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MjZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4NTZzNDEzZGZkMzF5NTQx.jpg
Here's an installed view from the rear - you can barely see it:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MzZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4NDZzNDEzZGZkMzF5NTQx.jpg
I left it on the softest setting. With 11k F and 16k R, it's pretty neutral unless you trailbrake or lift off throttle in a corner. ;)
Thanks to johnzm for a great deal on the bar. Best suspension mod besides coilovers so far!
Start by removing the one bolt from each rear lower control arm (I'm using itr rear lca's, so your setup may be a little different...)
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3NjZzNDEzZGZkMzF5NTQx.jpg
There are five bolts holding two brackets on per side - one is the side rear tow hook, and the other is the bracket which holds the swaybar.
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3NzZzNDEzZGZkMzF5NTQx.jpg
Comparing stock (above) vs ST (below):
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3ODZzNDEzZGZkMzF5NTQx.jpg
Stock is 1/2" in diameter:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU3OTZzNDEzZGZkMzF5NTQx.jpg
ST is 7/8" in diameter:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MDZzNDEzZGZkMzF5NTQx.jpg
The ST brackets bolt on using only three bolts. It's up to you whether to reuse the oem bolts or the ST ones... I used the longer ones:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MTZzNDEzZGZkMzF5NTQx.jpg
There's a weird plate to line up the endlinks and bolt to the rear lca's. I'm pretty disappointed in the design, but whatever works:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MjZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4NTZzNDEzZGZkMzF5NTQx.jpg
Here's an installed view from the rear - you can barely see it:
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4MzZzNDEzZGZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTMyMjU4NDZzNDEzZGZkMzF5NTQx.jpg
I left it on the softest setting. With 11k F and 16k R, it's pretty neutral unless you trailbrake or lift off throttle in a corner. ;)
Thanks to johnzm for a great deal on the bar. Best suspension mod besides coilovers so far!