Log in

View Full Version : FS: P2T ECU, MSD 6A, ACL Crank Bearings


Blaze the chemi
08-03-2006, 08:02 PM
MSD 6A $75
P2T OBD2B 99-00 Civic Si ECU $50 (SOLD)
ACL Crank and Thrust Bearings fits:B16A, B18A, B20A, B21A1, D16A, ZC $70

MSD is fine. I just don't need it. Stock ignition is great.
http://i102.photobucket.com/albums/m83/blaze_the_chemi/pic052.jpg

The ECU works. I was just comparing my stock ECU making sure it is working fine.
http://i102.photobucket.com/albums/m83/blaze_the_chemi/pic043.jpg

I rebuilt my engine last fall and only needed the rod bearings. Never opened these.
http://i102.photobucket.com/albums/m83/blaze_the_chemi/pic046.jpg
BlackEj6
08-03-2006, 08:20 PM
you willing to trade the ECU and/or MSD for anything listed in this thread?..
http://forums.importatlanta.com/showthread.php?t=74440
sirhatch1030
08-03-2006, 09:09 PM
r u saying u have bearings for all thise motors or u saying they fit these motors because the bearings r not the same. for the motors listed they r all diff sizes.
Blaze the chemi
08-03-2006, 09:16 PM
you willing to trade the ECU and/or MSD for anything listed in this thread?..
http://forums.importatlanta.com/showthread.php?t=74440
Nope. I'm getting rid of stuff.
Blaze the chemi
08-03-2006, 09:17 PM
r u saying u have bearings for all thise motors or u saying they fit these motors because the bearings r not the same. for the motors listed they r all diff sizes.
I'm saying that the bearings will fit in these motors.
sirhatch1030
08-04-2006, 06:02 PM
they will not fit in all these motors the cranks r not the same size.
Blaze the chemi
08-04-2006, 06:29 PM
they will not fit in all these motors the cranks r not the same size.
These are the engine codes printed on the sticker from ACL. Call them to correct their typ-o.
Vteckidd
08-04-2006, 07:02 PM
the main bearings are all the same for ANY b series motor. Rod bearings are the only ones that are different. LS/B16/B20 bearings are wider, GSR are narrower

Main bearings are all the same. same goes for thrust washers.

ACL bearings are all HONDA GREEN SPEC so check your clearances
sirhatch1030
08-04-2006, 07:18 PM
he said htey would fit zc and d16 , thats what i was refering to .
Vteckidd
08-04-2006, 07:38 PM
oh ill agree with that, i have a set of Mains here an it lists all B series, not D series
Blaze the chemi
08-04-2006, 11:58 PM
he said htey would fit zc and d16 , thats what i was refering to .
Correction...
The Thrust Washers will fit B series and D16A, ZC.

The Main Bearing will not fir the D or ZC. Only the B.

Thanks Sir Hatch and VtecKidd for pointing that out

The ECU has been sold.
BlackEj6
08-07-2006, 02:52 AM
Thanks man..The ecu solved my problem
Blaze the chemi
08-13-2006, 10:08 PM
Thanks man..The ecu solved my problem
Great. I figured it would.

ttt
Blaze the chemi
08-16-2006, 10:57 PM
TTT again.

I know some poeple need this stuff right?
lsxtreme
08-16-2006, 11:03 PM
how much for the bearings
Blaze the chemi
08-29-2006, 09:53 PM
ACL Crank and Thrust Bearings fits:B16A, B18A, B20A, B21A1, D16A, ZC $70

$70, but someone else is inquiring about the bearings, but they have been stalling for 2 weeks. You want them?