nasty94civic
05-11-2005, 06:34 PM
This is a T3/T4 Turbo Kit that i pieced together.I am selling because it will not fit in my car with a/c. There is nothing wrong with any of the products. This kit is almost ready to go. I installed the gauges, oil inlet line for the turbo, loosely fitted the manifold to the engine and installed the gauge pod then realized the turbo wouldn't fit without removing my a/c so i'm not going to install the turbo. You still need a Map Bypass Sensor and Fuel Injectors, but other than that this kit has everything!
I had intended on putting this in a 2000 Honda Civic SI with the stock b16a2 power plant.
Kit includes:
T3/T4 Turbo A/R.50 .63Hot
28x6x2.5" Front Mount Intercooler
Downpipe braided exhaust pipe
RevHard Intercooler Pipe w/clamps and accessories for 99-00 Civic SI DOHC
RevHard Aluminum Charge Pipe w/ greddy hks style flange
Silicone for Intercooler Pipe
3" Air Filter
OBX Silver Boost,Oil Pressure,Oil Temperature Gauges (has been installed but never used)
SMS b16/b18 Log Style Turbo Manifold
Triple Gauge Pillar for 96-00 Honda Civic (installed and painted but yours for free)
MSD Inline Fuel Pump part#2225 43GPH
Vortech FMU Set at 10:1 Fuel Pressure Ratio (can be changed)
38mm Tial Style Wastegate w/ all accessories 7.8lb spring
Greddy Type S Style Blow Off Valve
All turbo accessories/gaskets that came with the kit when I first bought it.
$2000 firm
I had intended on putting this in a 2000 Honda Civic SI with the stock b16a2 power plant.
Kit includes:
T3/T4 Turbo A/R.50 .63Hot
28x6x2.5" Front Mount Intercooler
Downpipe braided exhaust pipe
RevHard Intercooler Pipe w/clamps and accessories for 99-00 Civic SI DOHC
RevHard Aluminum Charge Pipe w/ greddy hks style flange
Silicone for Intercooler Pipe
3" Air Filter
OBX Silver Boost,Oil Pressure,Oil Temperature Gauges (has been installed but never used)
SMS b16/b18 Log Style Turbo Manifold
Triple Gauge Pillar for 96-00 Honda Civic (installed and painted but yours for free)
MSD Inline Fuel Pump part#2225 43GPH
Vortech FMU Set at 10:1 Fuel Pressure Ratio (can be changed)
38mm Tial Style Wastegate w/ all accessories 7.8lb spring
Greddy Type S Style Blow Off Valve
All turbo accessories/gaskets that came with the kit when I first bought it.
$2000 firm