PDA

View Full Version : Power Mods turbo?


jimjam187
12-04-2005, 10:27 PM
car wont build over 8 psi.
#1Beaver
12-04-2005, 11:02 PM
like that car saw you at northlake mall
Jon00
12-04-2005, 11:14 PM
car wont build over 8 psi.

need more info then that
The Green Monster
12-04-2005, 11:38 PM
^^^werd^^^
sebastianHoff
12-04-2005, 11:39 PM
car wont build over 8 psi.
cause thats what the wastegate is set at dumb ass.
jimjam187
12-05-2005, 09:02 AM
Greddy Type s bov, tial 38mm wg, t3 turbo, turbo xs duel stage boost cont.
when I turn up the boost nothing happens.
The Green Monster
12-05-2005, 12:49 PM
so that's the only thing...nothing else happens? no white smoke...nothing? everything is perfect except the fact it won't boost past 8lbs?
jimjam187
12-05-2005, 08:20 PM
yup this is a complete new buildother then the turbo setup came off another car of mine but all worked fine before., no smoke nothing. You have no reason to call me a dumb ass
jimjam187
12-06-2005, 12:10 PM
hwen it was on the dyno when we turned up the boost the hp went down, and still kept the 8lb level?
The Green Monster
12-06-2005, 09:51 PM
hmm...yeah...only thing i can think of would be the waste gate...or a leak somewhere
jimjam187
12-07-2005, 05:18 PM
thanks for the help
jimjam187
12-14-2005, 09:26 PM
sTILL NO COMMENTS? BUMP...
sebastianHoff
12-14-2005, 09:31 PM
because its the fuckin wastegate
jimjam187
12-15-2005, 03:26 PM
Whell MR. Einstein SO if iI go out and buy a wastegate and that doesnt work I can come take it out of your ASS? Just wanting to see if n e 1 else has had this problem. Because Ive had people tell me it could be 1 of 4 thing wrong. So unless you know for sure quit jacking my post ass hole! :2up:
delslowlovu
12-15-2005, 06:09 PM
what psi ring do u have in your wg? are u 110% sure your boost controller is working right?
1/4Mile
12-15-2005, 08:29 PM
Greddy Type s bov, tial 38mm wg, t3 turbo, turbo xs duel stage boost cont.
when I turn up the boost nothing happens.

Ifyou have 2 nipples on your wastegate make sure you use the top for the boost controller the bottom you use only if you and running off the WG spring which, I'm going to go out on a limb and say its a 7-8lb spring.
jimjam187
12-20-2005, 10:47 PM
8lb spring It wont build boost past what the wg is set @. The turbo XS people told me to hook the boost controler to the bottom, I thought the top 1 was for the electric boost cont?
1/4Mile
12-21-2005, 10:05 AM
8lb spring It wont build boost past what the wg is set @. The turbo XS people told me to hook the boost controler to the bottom, I thought the top 1 was for the electric boost cont?

Electronic or manual they both do the same thing, and the top nipple is for that. If you hook the bootm up you are only going to run off the wg spring.