wtb :b series lsd

[h22 jones]

I need a LSD for a b series tranny.

[1civic]

I've got one!! But you can't have it... :2up:


lmaooooo!!

[1civic]

OBX for GSR is 475!! B16 is like 449!!


Link:
OBX LSD 94-01 ACURA INTEGRA GSR ONLY ( LSD 10678) , OBX LSD, Low price on OBX LSD (http://www.erzperformance.com/94-01-ACURA-INTEGRA-GSR-ONLY-LSD-10678-p/lsd10678.htm)


Or the 1way Mfactory: http://www.aj-racing.com/shop/product.php?productid=16745&cat=384&page=1

[EmminoDaGreat]

obx garbage

[1civic]

He will never break it with his 200hp "H"... ;)

[D16T]

OBX= Paper weight is all its good for

Sent from my DROID BIONIC using Tapatalk 2

[1civic]

paperweight just like the factory LSD...lmaoooooo!!

[DarKStaR]

He will never break it with his 200hp "H"... ;)

Who says its going in his ;) plus i think you pressed the wrong number :P

[1civic]

Who says its going in his ;) plus i think you pressed the wrong number :P

300 from an H... bahahahah, shit might sling a vtec belt!! :P

[DarKStaR]

been done plenty of times, i dont see a problem making that number when stock block h's are pushing 250...

[1civic]

250 and 300 are worlds apart in NA land...LOL

[DarKStaR]

So 250 on a stock bottom end and head package, you dont think 300 is possible with more alot more stroke,bigger bore,more compression, and bigger cam? Or is it you dont think it will be done in GA? I mean hell im shooting for 270 on oem stroker bottom end.


And to stay on topic....Bump

[EmminoDaGreat]

So 250 on a stock bottom end and head package, you dont think 300 is possible with more alot more stroke,bigger bore,more compression, and bigger cam? Or is it you dont think it will be done in GA? I mean hell im shooting for 270 on oem stroker bottom end.


And to stay on topic....Bump

your shit has to hit vtec to make it to those numbers!!

[DarKStaR]

you shut your whore mouth! It will hit it this time and blow your face off!

[EmminoDaGreat]

lol

[1civic]

So 250 on a stock bottom end and head package, you dont think 300 is possible with more alot more stroke,bigger bore,more compression, and bigger cam? Or is it you dont think it will be done in GA? I mean hell im shooting for 270 on oem stroker bottom end.


And to stay on topic....Bump

Haven't seen a stock h2b make 250.. People can claim to be stock with cams but not stock, and 270 is different from 300, this is NA power.. You will hit a wall, and then will you see why it cost so much!! A bunch of OEM parts will not make 300, it will take a custom crank, rods, pistons, and a head which flows big numbers, etc! Then you will be limited by the intake to feed that big cam, and big port...LOL

300 can be done anywhere, just not easy, or cheap!

Later!!

[DarKStaR]

I never said oem parts will make 300. But you can make 300 on a 95mm(h23) crank, its been done. Then you have the 97mm(f23) which you can take even further. And i know 270 is different from 300, i was just stating that is my goal for my motor, so we will see what happens. Just remember h series isnt a b series ;)

[1civic]

I just wanna see you guys at the track!! :P





Bump..

[boostedneon]

ive got a phantom grip lsd u can buy for 250 call me at 6787023535

[h22 jones]

I have a couple of them looking for something better . Somebody beat me out of my high dollar tranny so having to back up and re group

[h22 jones]

I agree its not easy or cheap . No stock parts here only the best of the best. 10,000 in parts were not talking about bull shit put together but we will see . I'm lacking a tranny now because some ass hole had to have it more then me so I let it go .