Input Shaft Bearing

[Potter]

My transmission seems to make a very annoying noise when the clutch is not pressed in. When pressing the pedal to the floor the noise goes away. It's the ISB right? If so then is there anyone that is capable of replacing it for me? Please give me a call/text or pm with details on your price and the amount of hours that it will take to be done. I am located in Clayton County. Thanks in advance. 6785176927

[Potter]

BUMP

[allmotor-teg]

might want to contact h22jones for that one.

[.blank cd]

Throw out bearing

Or an input shaft bearing

Or your trans could be low on oil, or not have any in it at all

[Potter]

Throw out bearing

Or an input shaft bearing

Or your trans could be low on oil, or not have any in it at all

From what I understand, when the throw out bearing is bad, you hear the noise when the clutch is depressed. In my case, I stop hearing the noise as soon as i press the clutch down.

[EmminoDaGreat]

input shaft bearing will make noise on decel, accel etc. tob will make noise when clutch is engaged, but when disengaged it goes away

[Potter]

input shaft bearing will make noise on decel, accel etc. tob will make noise when clutch is engaged, but when disengaged it goes away

yes, that is exactly what happens.

[EmminoDaGreat]

we can replace it for you no problem, if you have never replaced the clutch and rear main I would suggest doing it at the same time

[Potter]

we can replace it for you no problem, if you have never replaced the clutch and rear main I would suggest doing it at the same time

The clutch has been replaced by the previous owner. The flywheel was resurfaced as well. What would be the price for the replacement?

[EmminoDaGreat]

well the bearing is probably only 40-60$ , you just have to pull trans.

[Potter]

Bump, what about someone who can come to me and do the job?

[Black4DrEK]

Pm'd

[Potter]

Pm'd

replied