HUGE mount problem. B series in EG

[nelson9995]

OKay you guys will need to use your imagination to picture this.

I bought a H series hatch, took it out to put a b series in. I noticed when I put the motor in that the side (transmission side) bracket where the mount is had been cut a little and a new hole had been made. Now that I have a B series mount, it does not lign up with the hole. It is like an inch away. There is not enough bracket. IDK what to do now. I was thinking to weld 2 metal plates on each side of the bracket to serve as an extension then drill a hole and place the mount there? I am not sure how to go about this. What do you guys think.

[terrytowe22]

Cut off the cutt mount in find a wreck car cut that mount bracket off in
Re- weld there a guy near me that prob has that mount part for u

[94_teg_ls]

http://www.hondapartsnow.com/Page_Product/PartDetail.aspx?catalogID=41&productID=10&yearID=34&doorID=1&gradeID=81&areaID=2&transmissionID=3&originID=-1&colorLabelIDs=-1&colorLabelID=-1&sectionID=8&idAndImageID=7197%20938403&isBigPicture=False&pageName=Body%20Structure%20Components%20(1)

number 27

[Crazydelsol]

yup that's the best thing to do! Just cut it and find another bracket at the junk yard and re-weld it!! Gl man

Cut off the cutt mount in find a wreck car cut that mount bracket off in
Re- weld there a guy near me that prob has that mount part for u

[nelson9995]

Thank you guys so much. You saved me ahuge headache. I am buying the part 27 on honda parts now it is very very cheap and brand new. Do you guys know anyone that wouldn't charge me an arm and a leg to come to carroll county to weld it for me?

[EmminoDaGreat]

Find mount, drill spot welds out, weld in place

[1civic]

Thank you guys so much. You saved me ahuge headache. I am buying the part 27 on honda parts now it is very very cheap and brand new. Do you guys know anyone that wouldn't charge me an arm and a leg to come to carroll county to weld it for me?

I'm close, and only have sundays tho.. Drill the welds, remove the old one, and then prep the new mount.. I have a spot welder, but you will be on your own with prep work and re-painting tho.. Cover my gas and it's a done deal.. :)

[Tech5]

Find mount, drill spot welds out, weld in place

pretty much very easy and if done right you will have no issues

[nelson9995]

i ordered the bracket today. so I should get it soon.

[YoItsCarlie]

where did you order the bracket from. prices and partn umbers? i may be needing one for my automatic eg.

[nelson9995]

check the link above
by 94tegls

[hondakid303]

is yous cut i just did a auto to Manuel swap and all u half to do is get a drop mount
50 bucks on ebay