d16z6 bogs and idle

[jdmalltheway]

i have a 89 civic d16z6 swap. it runs perfect when engine is cold and until engine starts to warm up it'll bog? change dizzy 1 weeks ago, fuel filter was change about october last year, put in 255 warboro fuel pump last year during november. I"m using the f22 injectors.


This only happens if i use my p28 ecu but if i use p06 chip up ecu if don't have this problem. could it be my ecu? i hate running the po6 ecu because the p28 runs better and stronger... from my theory.

any help.

[*EFilliated*]

the problem is ur putting shit on ur motor u clearly dont need. 255 walboro really? f22 injectors? and u wanna run a stock SOHC ECU. :headslap:

[jdmalltheway]

it was running like this before i up grade these parts...so what would make a difference.

[Tech5]

Could be ecu I would try that ecu in another persons car and see how it runs

[Tech5]

the problem is ur putting shit on ur motor u clearly dont need. 255 walboro really? f22 injectors? and u wanna run a stock SOHC ECU. :headslap:

255 walboro is fine he has a stock regulator it can't push any more then allowed anyways .I like them in my cars because I am so weird and might throw a turbo one day or nitrous so leave it in for a upgrade later .Just don't be messing with a adjustable regulator and he will be fine .

[jdmalltheway]

appreciate that tech5. i also try my p28 in another vehicle and it has no problem with it. i guess we didn't ride it long enough for the ecu to relearn and re program.