Got V6?

[JAY5]

6 speed

http://i1136.photobucket.com/albums/n498/Jonasat/16574597.jpg
http://i1136.photobucket.com/albums/n498/Jonasat/ef1110e5.jpg
http://i1136.photobucket.com/albums/n498/Jonasat/b5fc798e.jpg

[Evil Goat]

i always wanted to do this but the inability to fit it under a stock hood killed it for me

[JAY5]

When your going fast....who needs a hood lmao!

[Bacon]

When your going fast....who needs a hood lmao!

:thinking: Maybe the person going fast so debris doesn't fly up and tear your shit up.

I hate these swaps about as much as an LS1/240 or other fucked up swaps.

[JAY5]

Hasn't happened yet, but thanks for the bad wishes :goodjob:

[Evil Goat]

When your going fast....who needs a hood lmao!

13 second cars aren't fast

[JAY5]

Hahaha^^^ calm down guys, I know it's not the fastest thing on the road. I was just sharing geez louise!

[Bacon]

I'm not knocking you in any sense of the word. Do your thing, man. I just don't get why people like radical swaps like this so much.

[SUBY_RUE]

I dig it man, good work...

[SLIM-ELBOW]

He'll yea. V6 civic FTW!!!

[mr.koupe]

That sHits so whack, waste of a thread. Lol

[DeeAOne]

that hood needs to be addressed. lol

[Franco Tirador]

i love it, just put one of those hood people used to put on these cars back in the nopi days, the ones that look like the mustang hoods, either way I like it, they now make locking oil caps for these swaps

[Bacon]

With the way his hood is cut, a locking gas cap would be the least of my worries. You can damn near get to any sensor you want and could do a ton of damage.

[40th GT]

i love it, just put one of those hood people used to put on these cars back in the nopi days, the ones that look like the mustang hoods, either way I like it, they now make locking oil caps for these swaps

You mean a cowl induction hood. lol

To the OP: Nice work. There's really no replacement for displacement, in NA form anyway. :goodjob:

[DeeAOne]

Even if the edges of the cut were cleaned up it would look thousands of times better. I love the swap it itself though.

like this..
http://i24.photobucket.com/albums/c13/eastwickturtle/4258981047_c813ac946e_o.jpg

[NoWAyItZTOMmY]

you took the cutting to the hood to the extreme.

you the piece that u cut and fill it in some.

looks good though

[JAY5]

Thanks for all the compliments! The hood will be addressed, don't know how yet but it will lol

[JDMDA_1.7]

hell yea ! i like it man.3.2 all day lol

[r_Senik]

i bet this is a blast on the highway.

[DA9_Vito]

Hasport makes mounts to make them fit under the hood.

[Sir_Christopher]

Hasport makes mounts to make them fit under the hood.

but then he would have zero ground clearance!
which blows, i did that with my h22a ef, and ide rather have the hood lifted or cut then hitting the header on everything

[chaseamundo]

i can dig it lol

[adodd3]

I can dig it!

[CRXdelsol]

Dam nice work man! Plans on boosting it?

[Relentless]

I'm not a big fan of how those swaps stick out the hood, but do your thing man.

[JAY5]

Dam nice work man! Plans on boosting it?

Nope, it's for sale but I'm not trying to turn this into a fs thread. Boost would definitely wake this thing up. That and some good super sticky tires. I'll try to post a video later.

[Genji-Sama]

I thought HASport made a mount kit where this would fit under the stock hood?!?!, but either way I would clean up the cuts or something, but props on the swap :goodjob:

[msanch24]

I thought HASport made a mount kit where this would fit under the stock hood?!?!, but either way I would clean up the cuts or something, but props on the swap :goodjob:

lol.

[alpine_aw11]

I gotta say I like that you did the swap before you made the car look good, seriously.

[Mad Mike]

Vary nice. I like.

[DA9_Vito]

I thought HASport made a mount kit where this would fit under the stock hood?!?!, but either way I would clean up the cuts or something, but props on the swap :goodjob:

i said that above lol.

[DA9_Vito]

but then he would have zero ground clearance!
which blows, i did that with my h22a ef, and ide rather have the hood lifted or cut then hitting the header on everything

yes but did you buy the adjustable ones?

[EG_Ryder]

Awesome swap man, how long did it take and how hard was it? You really should have gotten the hasport J swap mounts so you could still use your hood properly. I dont see why you even have a hood. With a hole that big it doesn't really serve a purpose anymore

[Liltoua]

what happens if it rains?

[Bacon]

Reading owns several people in this thread. HASport makes mounts for this swap to fit under the hood but ground clearance would suffer. I would much rather have it sticking out of the hood and have the car lowered a little on a nice suspension setup than to have it under the hood and a stock suspension.

[msanch24]

Reading owns several people in this thread

qft

[LIKEG6]

I saw ole Luis today by the strip mall. I still have yet to see this thing in action.

[JAY5]

I saw ole Luis today by the strip mall. I still have yet to see this thing in action.

Just call him and talk trash, he'll bring it out!!!

[Romeo]

Damn son, you need to go back to the drawing board with that hood. Hahahaha.

[Genji-Sama]

lol.
fanboooiiii response

i said that above lol.

proper response, lol, sry didn't bother to read all the comments. I just leave my :2cents: sometimes and go

[msanch24]

fanboooiiii response

You'll wear your "O" and "I" key out if you keep this up. Just friendly, mature advice.

[Bacon]

You'll wear your "O" and "I" key out if you keep this up. Just friendly, mature advice.

Friendly, mature advice is to take it to PMs instead of cluttering up two different threads with this shit

[msanch24]

Friendly, mature advice is to take it to PMs instead of cluttering up two different threads with this shit

mhm.

[Drummerboy]

One of the only set ups I would supercharge. Theres actually more room when you swap this into a 4th gen prelude, THAT I would turbo.

[DA9_Vito]

Reading owns several people in this thread. HASport makes mounts for this swap to fit under the hood but ground clearance would suffer. I would much rather have it sticking out of the hood and have the car lowered a little on a nice suspension setup than to have it under the hood and a stock suspension.

already said something like that saying their adjustable but like you say nobody reads lol. but i know on the integras they have no problems with ground clearance.

[Thegrizz]

I'm not knocking you in any sense of the word. Do your thing, man. I just don't get why people like radical swaps like this so much.

werent you going to attempt a 3.0 swap not to long ago...was on your page....

[dannysun]

that blue civic killed it

[Drummerboy]

I think some sort of lexan/plexiglass cover would be cool, kind of like the zr1.

This guy got the entire thing to fit, but still cut the hood for a little addition.

http://www.stanceiseverything.com/wp-content/uploads/2010/07/workedomgcivic.jpg
http://www.stanceiseverything.com/wp-content/uploads/2010/07/workedomgcivic5.jpg

[msanch24]

holy piss i bet that thing moves

[msanch24]

werent you going to attempt a 3.0 swap not to long ago...was on your page....

The 3.0 is a really common swap in the contour/focus community.

[Bacon]

The 3.0 is a really common swap in the contour/focus community.

That was the route I was gonna go but never bought my old contour back.

Sent from my DROIDX using Tapatalk

[msanch24]

That was the route I was gonna go but never bought my old contour back.

Sent from my DROIDX using Tapatalk

I hear those 3.0 contours are stout little cars. I considered one a little while back but it didnt have a cat. Sadly, that was a deal breaker for me.

[1d10t]

I think its awesome. Sticking out of the hood and all.
If its not dumped and stretched on here geeze

[Genji-Sama]

I think some sort of lexan/plexiglass cover would be cool, kind of like the zr1.

This guy got the entire thing to fit, but still cut the hood for a little addition.

[IMG]http://www.stanceiseverything.com/wp-content/uploads/2010/07/workedomgcivic.jpg[IMG]
[IMG]http://www.stanceiseverything.com/wp-content/uploads/2010/07/workedomgcivic5.jpg[IMG]

Ummmm, dayum, I wanna see this go down the track

[civic gsr]

looks nice just work on the hood ....

[DustnU]

How hard was that to do?? I was thinking about it myself.

[WAT TURBO?]

OP nice swap! I bet the torque steer is incredible.


My last two race cars didnt have hoods. From what I found, I was either working on them or showing them off so I left the hood off. Could become a problem if daily driven though.

[jimjam187]

haters

[JAY5]

Swap is easy just like any other swap if you have done a ton of them. The car has Hasport mounts but they are not adjustable. And the car is driven daily with no issues. I drove it to Reynolds for import showdown and I had no issues then either.

Thanks for all the compliments.

[Thegrizz]

ok gotchya. thanks for the info.used to have a contour actually.

[1CleanEg]

its always nice to see a j-swap man, good work. That blue civic is hotness as well!

[DA9_Vito]

I'd love to have a J32 in my integra. but far as i know, they dont make the mounts for my year (YET)

[burke420]

lift ur hood and or buy a cowl hood or something.

[Bacon]

I hear those 3.0 contours are stout little cars. I considered one a little while back but it didnt have a cat. Sadly, that was a deal breaker for me.

They are very stout cars even without boost. Check out www.nautilusperformance.com They specialize in contour swaps/turbo and other cars.

[msanch24]

They are very stout cars even without boost. Check out www.nautilusperformance.com They specialize in contour swaps/turbo and other cars.

cool stuff. Ill have to consider one next time im in the market. Especially since you can get a nice one for crazy cheap.

[djpikachu1]

ddddaaaammmmnnnneee I want that car

[jmotley]

thats awesome!!

[Wicho_ej6]

Bad ass!!!!

[JDMDA_1.7]

got any vids??

[hybrid90accord]

great job just wish the rest of the car got the same attention as the motor did. hate seeing nice swaps in cars where the body doesnt compliment the swap

[justnprsh07]

isnt this lewis's car

[VIP Style]

hmm ahh, the concept of a V6 civic seems cool, but damn yo looks like a headache waiting to happen, doesn't look too safe.