Log in

View Full Version : 94 integra not getting spark?


j0nbunklah0m
08-02-2010, 02:08 AM
hey i just did a obd1 LS swap into my integra and im not getting spark now. I got the dizzy from my friend and he said it came off his DA integra and was working when he pulled it. But when i use it its not working? The car cranks, but just wont turn over. I also touched the starter and it gets kinda hot. Could it be any of those? or maybe an ignition thing.. i did change the steering column and maybe didnt connect a plug?


please help asap IA. +reps for help. thanks.
94_teg_ls
08-02-2010, 02:17 AM
main relay kicking on?
jdmalltheway
08-02-2010, 09:27 AM
relay or try another distributor to see if it works. just to let you know don't try starting the vehicle more than 15 sec or else it would damage your starter. most likely when your not getting spark it will be your icm inside your distributor, just replace that and see if you have any sparks.
preferredduck
08-02-2010, 10:58 PM
relay or try another distributor to see if it works. just to let you know don't try starting the vehicle more than 15 sec or else it would damage your starter. most likely when your not getting spark it will be your icm inside your distributor, just replace that and see if you have any sparks.

i have a couple of these that work that will fit. check also to make sure there is no oil in the dizzy. if it came off a DA is everything wired right on the dizzy. also make sure the firing order is right.
j0nbunklah0m
08-02-2010, 11:53 PM
made sure the firing order is right and i also just went out and bought a brand new dizzy, and STILL NO SPARK!. i checked the main relay also. im running out of ideas
KIZDAWAY
08-03-2010, 12:11 AM
VTC not working
j0nbunklah0m
08-08-2010, 09:17 PM
well now i found out that im not getting spark and no fuel is reaching the cylinders. helpppppppppppp
94_teg_ls
08-08-2010, 09:32 PM
ecu?
j0nbunklah0m
08-08-2010, 09:44 PM
tried my friends ecu and still doesnt turn over
94_teg_ls
08-08-2010, 09:46 PM
check you t stat housing ground
j0nbunklah0m
08-08-2010, 10:03 PM
thats good, already grounded, all grounds are good.
94_teg_ls
08-08-2010, 10:05 PM
ok then is the fuel pump turning on?
j0nbunklah0m
08-08-2010, 10:18 PM
yes it turns on, and is loud as hell. getting fuel to the fuel rail, but not into the cylinders?
94_teg_ls
08-08-2010, 10:20 PM
what injectors?
j0nbunklah0m
08-08-2010, 11:00 PM
obd1 rc 650 rcc high impedience
94_teg_ls
08-08-2010, 11:06 PM
you have stock one i would switch them out
j0nbunklah0m
08-08-2010, 11:37 PM
im not sure if my basemap will let it crank, cause the basemap is set for my injectors, 650
VickNotic
08-10-2010, 03:51 AM
use stock ecu, stock injectors and check timing
joshk5145
08-10-2010, 06:21 PM
Check injector pulse just to see?